Advertisement
Quick Links
Advertisement
Related Manuals for Wolf LINKEX WF-300 XL
Summary of Contents for Wolf LINKEX WF-300 XL
- Page 1 WF-300 ®...
- Page 2 EN 61000-3-2:2014, EN 61000-3-3:2013. demonstrating compliance with all relevant Harmonised Standards and Essential Health and Safety Requirements. This declaration is issued under the sole responsibility of Wolf Safety Lamp Company. The Wolf WF-300XL LED Floodlite is a high performance lightweight portable floodlight, constructed from marine grade Alex Jackson –...
- Page 3 Freq Hz 50/60 50/60 service into a non hazardous area. Remove the cover and apply Total Circuit ≤ 55 Watts ≤ 62 Watts power to the Floodlite. Check the input voltage at the terminals is Power present and is the correct rating for the Floodlite. If the voltage is correct the check the output voltage to the LED panels, this should VA (AC) 84VA at 24V AC be 19V DC+/-1V. If this voltage is not present then the driver is 96VA at 42V AC faulty, if it is then the LED panel is faulty. Replace as necessary. 104VA at 48V AC DISPOSAL OF WASTE MATERIAL Disposal of packaging, redundant LinkEx LED products and parts should be carried out in accordance with applicable regulations. MAINTENANCE SPARE PARTS See diagrams overleaf • Only suitably qualified and experienced technicians are to assemble/disassemble the Floodlite. The Wolf Safety Lamp Co. Ltd has a policy of continuous product improvement. Changes in design details may be made without • Isolate the Floodlite from the mains supply and allow prior notice. to cool before carrying out any maintenance work.
-
Page 4: Spare Parts
Gland M20 x 1.5mm 1 (+1 LinkEx Versions) WF-495 M20 stopping plug WF-550 Certification label and bracket are specific to the individual product, contact your authorised Wolf supplier for replacement. Contact your authorised Wolf supplier for replacement cables, plugs or link socket components. Torque 3.6 – 3.8Nm Torque 0.5 – 0.6Nm Conductor must be below cross connection link, ensure ˂1mm conductor exposed from the... - Page 5 TERMINAL CONNECTING ACCESSORIES Lens Guard Kit WF-421 0.5-0.7Nm Ensure _ < 1mm conductor exposed Mesh cover from the metal of the terminal throat WF-480 Max 8mm 30mm Max 8mm 30mm Magnet Kit WF-545 WIRING SCHEMATIC 18-50V Protection cover kit WF-462 WIRING SCHEMATIC 90-264V Note: II 2GD Ex eb mb IIC T4 Gb (-40°C≤Ta≤+40°C).
- Page 6 Floodlite to be linkable to another Floodlite and set up a string of lights from a single power source. Contact your authorised Wolf supplier for replacement link socket parts. Threadlock medium...
- Page 7 LinkEx WF-300 XL LED Floodlite features ® • Ideal for Task lighting and work activities in a hazardous area • ATEX, UKEX and IECEx approved for Zone 1 and 21 explosive gas and dust atmospheres. • High power ‘fitted for life’ LED light source • High quality, even, ultra-wide angle LED light, reduces shadows and enhances visibility • Medium angle flood beam • Safe/Optimal Voltage Indication “SOVI” to ensure safe certified operation. • ATEX/UKEX/IECEx Approved Floodlite Protection Accessories available Authorised Representative (EU)2019R1020: Authorised Representative Service, 77 Camden Street Lower, Dublin, D02 XE80. Ireland WOLF SAFETY LAMP COMPANY Saxon Road Works, 1180 Sheffield, S8 0YA, UK T: +44 114 255 1051 E: info@wolfsafety.com W: www.wolfsafety.com WF-540 Issue 07 DF593 MMD/WM/?.22/?K...
Need help?
Do you have a question about the LINKEX WF-300 XL and is the answer not in the manual?
Questions and answers