Related Manuals for Tomtar MR-S
Summary of Contents for Tomtar MR-S
- Page 1 TOMTAR MR-S & TOMTAR MR-LG Standard & lightweight wheelchair User manual Version 3.1...
- Page 2 FOREWORD Thank you for choosing the TOMTAR MR-S / MR-LG manual wheelchair from DIETZ. Read these operating instructions carefully be- ing product safety and on recalls, please contact fore starting to use your new TOMTAR MR-S / DIETZ in writing or by telephone. You will find our MR-LG.
-
Page 3: Table Of Contents
......15 (only TOMTAR MR-LG) ... . .28 Servicing/maintenance . -
Page 4: Important Information
INTENDED PURPOSE CONTRAINDICATIONS The wheelchair TOMTAR MR-S / MR-LG is only intended to be used to carry Use of the wheelchair is unsuitable in the case of persons with a maximum bodyweight of 130 kg. It can be used indoors and False sensations outdoors. -
Page 5: Product Description
2 PRODUCT DESCRIPTION 2 PRODUCT DESCRIPTION STRUCTURE OF THE TOMTAR MR-S/MR-LG The TOMTAR MR-S / MR-LG is delivered completely assembled and pack- aged in a box. If possible, please keep the packaging for possible later stor- age of the wheelchair. -
Page 6: Setting Up The Wheelchair
2. Take hold of the front and back edges of the seat cover and pull the seat cover upwards in the middle (3, fig. 2). The wheelchair will then fig. 4 fig. 2 fold automatically. TOMTAR MR-S/MR-LG user manual / version 3.1 EN... -
Page 7: Using The Wheelchair
Do not stand on the foot plates or footboard while getting up or sitting down. They are not intended to bear the full weight of one person. NOTE To transfer sidewards, the side panel must be swivelled up (see chapter 4.2). TOMTAR MR-S/MR-LG user manual / version 3.1 EN... -
Page 8: Swivelling The Side Panels/Armrests
/armrest. Ensure fig. 7 automatically unlocked and can easily become that the locking pin audibly engages. detached from their mounts. Please be aware of this, e.g. during transport! TOMTAR MR-S/MR-LG user manual / version 3.1 EN... -
Page 9: Propelling And Slowing Down The
Hanging loads on the wheelchair increases the WARNING ceeded. risk of it tipping over backwards. During hard braking manoeuvres the push rims That is why DIETZ recommends using anti-tip- can become quite hot. ping supports. TOMTAR MR-S/MR-LG user manual / version 3.1 EN... -
Page 10: Parking Brakes
If the drum brakes are locked, it must not be possible to push the wheelchair. Releasing the parking brake: Pull the brake levers gently. The lock will be released. TOMTAR MR-S/MR-LG user manual / version 3.1 EN... -
Page 11: Removing And Attaching Rear Wheels
1. Use your thumb to press the lock button of the quick-release axle in the centre of the TOMTAR MR-S folded W/L/H in mm = 310 / 945 / 800 wheel hub (1, fig. 15). TOMTAR MR-LG folded W/L/H in mm = 310 / 945 / 800 2. -
Page 12: Wheelchair As A Car Seat
VZO). All wheelchair spaces in a vehicle have to Always ask the carrier whether the respective The TOMTAR MR-S/ MR-LG is tested in line with sembly instructions. be provided with a wheelchair and wheelchair vehicle is designed, insured and equipped to the ISO standard 7176-19 / ISO ... -
Page 13: Wheelchair User Restraint System
75078 and appropriately identified by their manufacturer may be used as restraint systems. The wheelchair’s parking brakes must be fully engaged throughout the drive. (D) Wrong way to attach the safety belts fig. 19 TOMTAR MR-S/MR-LG user manual / version 3.1 EN... -
Page 14: Individual Adjustments
(15 mm) between the tube of the side fig. 22 panel and the armrest (3). 4. Attach the armrest with the two Phillips fig. 20 screws. TOMTAR MR-S/MR-LG user manual / version 3.1 EN... -
Page 15: Adjusting The Push Handle (Only Tomtar Mr-Lg)
5.6 Seat height adjustment (only TOMTAR MR-LG) Only to be performed by specialist staff: On the TOMTAR MR-LG, the height of the push handle can be adjusted to suit the requirements The wheelchair is delivered with the seat at a of the accompanying person. -
Page 16: Parking Brakes
Converting the wheelbase means all brakes will Ensure that the drum brakes are evenly adjus- have to be readjusted (see chapter 5.7 and 5.8). ted on both sides of the wheelchair. TOMTAR MR-S/MR-LG user manual / version 3.1 EN... -
Page 17: Anti-Tipping Supports (Optional)
Now adjust the foot measured from the back frame. plate to the desired angle (2, fig. 35) then tighten fig. 35 the Allen screw again. fig. 37 TOMTAR MR-S/MR-LG user manual / version 3.1 EN... -
Page 18: Amputee Support (Optional)
4. Press the release lever forwards and push the screwdriver and a size 10 open-end wrench. leg rest down at the same time to increase fig. 39 the knee angle (fig 41). fig. 42 TOMTAR MR-S/MR-LG user manual / version 3.1 EN... -
Page 19: Accessories And Add-Ons From External Suppliers
20 mm steps (2, fig. 44). fig. 44 WARNING The calf pad can be swivelled outwards with the holder to relieve the calf and give the leg more room (3, fig. 44). TOMTAR MR-S/MR-LG user manual / version 3.1 EN... -
Page 20: Technical Data
Wheelchair weight minus removable parts (here without rear wheels, without side panels, without leg rests) The static stability indicates the wheelchair’s tipping resistance on slopes and gradients. Maximum user weight including load/The weight of the load reduces the maximum user weight. TOMTAR MR-S/MR-LG user manual / version 3.1 EN... -
Page 21: Technical Specifications
34 x 4.5 34 x 4.5 Push handle height 920-940 920-1025 Product tests: The TOMTAR MR-S and MR-LG fulfils the requirements of the international Rear wheels (∅ outer x B) ” 24 x 1 3/8 24 x 1 3/8 standards: Front wheels (∅... -
Page 22: Safety Instructions
DIETZ recom- side frame. mends using anti-tipping supports. TOMTAR MR-S/MR-LG user manual / version 3.1 EN... -
Page 23: Instructions For General Use
Check for correct function and travelling. damage • The wheels must be replaced if damaged. Tyres (PU) Check for correct • Damaged or worn tyres must be replaced. function and damage Abb.45 TOMTAR MR-S/MR-LG user manual / version 3.1 EN... -
Page 24: Troubleshooting
• The entire wheelchair must be cleaned as necessary Cleaning depending on the level of contamination but at least Check for contamination once per month (see chapter Cleaning instructions). TOMTAR MR-S/MR-LG user manual / version 3.1 EN... -
Page 25: Disinfection
After longer periods of storage (> 4 months), facility. please check all the inspection points on the wheelchair listed in the maintenance schedule before reusing/redeploying the chair. TOMTAR MR-S/MR-LG user manual / version 3.1 EN... -
Page 26: Product Labelling
Follow the operating instructions vehicle. Models marked with these labels have not been crash tested. Medical device * Depends on the wheelchair settings and user’s abilities TOMTAR MR-S/MR-LG user manual / version 3.1 EN... - Page 27 Tel.: +49 7248.9186-0 Fax: +49 7248.9186-86 info@dietz-reha.de www.dietz-rehab.de TOMTAR is a registered trademark belonging to DIETZ GmbH. TOMTAR products are sold by DIETZ GmbH. Misprint, falsities, price and product changes reserved. © DIETZ GmbH, Karlsbad Reproduction, either in part or in whole, only with written permission of...
Need help?
Do you have a question about the MR-S and is the answer not in the manual?
Questions and answers