VTech My Busy Workbench Instruction Manual page 14

4. Insert the Large Gear into the Electronic Panel. Insert the
Electronic Panel into the slot of the Workbench Top. Use four
of the Real Screws and your own screwdriver to securely attach
the Electronic Panel.
5. Use four of the Real Screws and your own screwdriver to securely
attach the Vice.
6. To secure the base to the
legs, use the included Drill or
Screwdriver to tighten two of
the Grey Toy Screws to the
Workbench Top.
NOTE: Do not use 2 extra Grey
Toy Screws to secure the back
legs. You will do this later on in
assembly.
13
13
13