VTech My Busy Workbench Instruction Manual page 13

WORKBENCH ASSEMBLY INSTRUCTIONS
Please refer to images on pages 3, 4 and 5.
1. NOTE: Use the included L-Shaped
Spanner to screw a Grey Toy Nut to
a Grey Toy Screw during assembly.
2. Use the included Drill or Screwdriver to tighten 8 Grey Toy
Screws and Nuts to attach the Right and Left Leg Supports
where the centre tray will rest on the left and right legs.
3. Insert the Centre Tray into the two
Leg Supports.
12
12
12