Table of Contents
Advertisement
USER GUIDE
Troubleshooting
PROBLEM
Appliance does not operate
Appliance is not cold enough
Turns on and off frequently
The light does not work
Vibrations
The appliance seems to make
too much noise
The door will not close
properly
POSSIBLE CAUSE
• Not plugged in.
• The appliance is turned off.
• Tripped circuit breaker or blown fuse.
• Check the temperature control setting.
• External environment may require a higher setting.
• The door is opened too often.
• The door is not closed completely.
• The door gasket does not seal properly.
• The room temperature is higher than normal.
• A large amount of contents has been added to the appliance.
• The door is opened too often.
• The door is not closed completely.
• The temperature control is not set correctly.
• The door gasket does not seal properly.
• Not plugged in.
• Tripped circuit breaker or blown fuse.
• The bulb has burned out.
• Check to be sure the appliance is level.
• The rattling noise may come from the flow of the refrigerant, which is
normal. As each cycle ends, you may hear gurgling sounds caused by
the flow of refrigerant in your appliance. Contraction and expansion of
the inside walls may cause popping and crackling noises.
• The appliance is not level.
• The appliance is not level.
• The door was reversed and not properly re-installed.
• The gasket is dirty.
• The shelves are out of position.
22
www.titan-appliances.com
Advertisement
Table of Contents
