Table of Contents
Advertisement
USER GUIDE
General Installation
Before installation, please check and ensure that:
1. The appliance should be installed in accordance with local electrical code requirements.
2. The appliance should be placed in a location that is strong enough to support its total weight –always assume
the weight when the appliance is fully loaded.
3. The appliance must be placed in its upright position for at least 24 hours before plugging in and powering on to
allow the compressor's oil to settle.
Unpacking the Appliance
Before installation, please check and ensure that:
1. Always have two or more people to shift and install the unit to avoid back or other injuries.
2. Remove packaging materials carefully. Any shipping tape and glue from your appliance should be removed
before using.
3. Never use sharp instruments, rubbing alcohol, flammable fluids, or abrasive cleaners when removing the tape
or glue. These products can damage the surface of your appliance.
Appliance Feet Adjustment
There is an adjustable leg on the bottom of the appliance that can be turned up or down to ensure that the
appliance is level. It is important that the appliance is level to minimize noise and vibration.
1. Move the appliance to the designated location.
2. Turn the leveling leg counter-clockwise as far as it will go, until the top of the foot is touching the bottom of
the chassis.
3. Slowly turn the leveling leg clockwise until the appliance is level.
IMPORTANT:
Do not remove any safety, warning, or product information labels from your appliance.
11
www.titan-appliances.com
Advertisement
Table of Contents
