Table of Contents
Advertisement
USER GUIDE
Types of Installation:
This appliance can be installed as a free standing or built-in unit. Keep in mind adequate ventilation and access
for service is a must.
1. For free-standing installation:
•
Allows the installation of the appliance in almost any place you desire.
•
Please follow the stated instructions for electrical requirements, and leveling of the appliance.
2. For built-in installation:
•
Allows the installation of the appliance under a counter or in a kitchen cabinet. Please ensure to provide
the required clearance space around the appliance.
•
Please make sure to allow adequate ventilation space around and in the back of the unit.
•
Place the appliance in front of the installation location. Adjust the feet and place the unit flat on the floor
or on a platform depending on your installation requirements.
•
If the electrical outlet for the appliance is behind the cabinet, plug in the appliance.
•
Push the appliance into position.
•
Do NOT install the unit behind a closed cabinet door.
Unit Installation Steps
1. Plug in the power/electrical cord.
2. Gently push the unit into position. Be careful not to entangle the cord.
3. Re-check the leveling, from front to back and side to side. Make any necessary adjustments. The unit's top
surface should be approximately 1/5"below the countertop.
4. Remove the interior packing material and wipe out the inside of the unit with a clean, water-dampened cloth.
5. To prevent damaging the door or door gasket, make sure the door is open at least 90-degrees when pulling
shelves out of the rail compartment.
6. The door opens to a maximum of 135 degrees with a door stop on the bottom hinge preventing the door from
opening further.
12
www.titan-appliances.com
Advertisement
Table of Contents
