Unpacking and Installing
If you unpack a LivingColors, the product is already linked to the remote control. You only need to plug it into the power system,
put the batteries into the remote control and start the experience!
=
Step 1:
Place your LivingColors in a selected location on a flat and stable surface and direct it towards the wall
(the optimal distance is 50 cm).
Step 2:
Plug your LivingColors into the power system.
Step 3:
Insert the two AAA-batteries by sliding open the battery compartment (+ and – as indicated) on the back
of the remote control.
User Manual LivingColors Iris
Getting started with your LivingColors
+
+
+