Table of Contents
Advertisement
2-13: SUB TINT
1.
Receive the color bar pattern. (RF Input)
2.
Connect the synchro scope to TP803.
3.
Activate the adjustment mode display of Fig. 1-1 and
press the channel button (16) on the remote control to
select "TINT".
4.
Press the VOL. UP/DOWN button on the remote control
until the waveform becomes as shown in Fig. 2-2.
5.
Receive the color bar pattern. (Audio Video Input)
6.
Press the INPUT SELECT button on the remote control
to set to the AV mode. Then perform the above
adjustments 2~4.
2-14: SUB COLOR
1.
Receive the color bar pattern. (RF Input)
2.
Connect the synchro scope to TP801.
3.
Activate the adjustment mode display of Fig. 1-1 and
press the channel button (15) on the remote control to
select "COLOR".
4.
Press the VOL. UP/DOWN button on the remote control
until the red color level is adjusted to 110% of the white
level. (Refer to Fig. 2-3)
5.
Receive the color bar pattern. (Audio Video Input)
6.
Press the INPUT SELECT button on the remote control
to set to the AV mode. Then perform the above
adjustments 2~4.
White 100%
ELECTRICAL ADJUSTMENTS
Fig. 2-2
White 0%
0%
110%
Red Level
Fig. 2-3
2-15: OSD HORIZONTAL
1.
Activate the adjustment mode display of Fig. 1-1.
2.
Press the VOL. UP/DOWN button on the remote
control until the difference of A and B becomes
minimum. (Refer to Fig. 2-4)
A
D2-3
TV
00 OSD
15
B
Fig. 2-4
Advertisement
Table of Contents
