Table of Contents
Advertisement
3. Press S to change the selection in the following sequence:
- >On/OFF status - > hours - > minutes
4. While the alarm status [On/OFF] is selected (blinking) press + or - to change
the status. When the alarm status is On, the daily alarm indicator ( -symbol) in
the bottom right corner of the display indicates that the alarm is on.
5. Set the other sections as follows:
• While any other digits (except alarm status) are selected (blinking), press + to
increase the value or - to decrease it. Holding down either button starts the scrolling
of the current selection.
• The 12-hour or 24-hour format of the alarm matches the format of the
timekeeping display, which is selected in the Time Adjustment Mode (see
chapter 4.1.). When using the 12-hour format of the alarm, take care to set the
time correctly as morning (AM) or afternoon (PM).
6. After you have set the daily alarm, press the M button to save the settings and
to return to the Setting Mode [SET].
68
Hide quick links:
Advertisement
Table of Contents
