Table of Contents
Advertisement
The display is illuminated by holding down the M
button for more than two seconds.
To set the time and date, refer to chapter 4.1 "Setting
Time, Date and Dual Time".
When diving, the dive entry time and date is registered
in the Logbook Memory. Remember always to check
before diving that the time and date are correctly set,
especially when traveling to different time zones.
2.4.2. STOPWATCH [TIMER]
The Stopwatch function is entered by pressing the
S button, when the time keeping display is shown.
The text TIMEr at the bottom and the mode indicator
(TIME) on the left side of the display indicate that
you have entered the Stopwatch function (Fig. 2.6.).
The stopwatch of the Mosquito lets you measure
elapsed time, split times and the times of two runners.
The range of the stopwatch is 9 hours, 59 minutes,
59.9 seconds (Fig. 2.7.). When the range is exceeded
the computer watch gives a beep and returns to the
time keeping display automatically.
Fig. 2.6. The Stopwatch function
is indicated by the TIMEr text
and a mode indicator.
Fig. 2.7. The Stopwatch displays
hours, minutes and seconds.
21
Hide quick links:
Advertisement
Table of Contents
