HTC Desire 626G+ dual sim Quick Start Manual

HTC Desire 626G+ dual sim
___

Inserting your nano SIM and microSD cards

IMPORTANT:
Use a standard nano SIM only.
Don't cut a micro SIM or regular SIM card and
insert it into the nano SIM slot. It's thicker than
the standard nano SIM card and may get stuck
in the slot.
The back cover and battery are not removable.
Don't pry the back cover open or remove
the battery by force. This will invalidate the
warranty.
gold contacts
nano SIM
cut-off corner
1. Make sure your phone is off
and is facing down. Open
the slot cover with your
thumb or finger.
2. The two upper slots are
nano SIM slots with trays. To
remove the tray from each
slot, insert your fingernail in
the small groove in the tray
and then pull the tray out.
3. Place your nano SIM cards
into the trays with the gold
contacts facing up and the
cut-off corner facing out.
Note: You can insert a 3G nano
SIM card in either slot. When you
have two cards inserted, only
one card can connect to the
3G network. The other card will
connect to the 2G network only.
SIM 1 connects to the 3G
network by default. You can also
set which card connects to 3G.
For details, see the user guide.