Advertisement
Quick Links
Advertisement
Related Manuals for impact LSA-WMB4HD
Summary of Contents for impact LSA-WMB4HD
- Page 1 LSA-WMB4HD 4 Foot Heavy Duty Wall Mounted Boom INSTRUCTIONS...
-
Page 2: Specifications
Introduction Thank you for choosing Impact. The Impact LSA-WMB4HD wall-mounted telescoping boom arm offers a quick and safe way to mount a light or camera, without setting up light stands or taking up valuable floor space. This heavy-duty telescoping aluminum tube extends the boom arm from 17 to 49 inches while supporting loads up to 11 pounds. - Page 3 • Do not attempt to disassemble or repair the equipment—doing so • Make sure the item is intact and will void the warranty, and Impact that there are no missing parts. will not be responsible for any damage. • All images are for illustrative purposes only.
- Page 4 Setup Mounting the Boom Arm The boom arm should be mounted to a wall or surface in the following orientation: Make sure the wall or surface will support the weight of the boom arm plus the weight of the lights or devices you plan to mount. Concrete or Masonry Wall Mounting Caution! Make sure the concrete wall or block is solid and at least 6 inches thick.
- Page 5 1. Use the mounting plates as templates to mark the small drilling holes. Tip: Use a bubble level to ensure the mounting plate is straight. 2. Hold the LSA-WMB4HD in place and drill in four wood screws through the mounting plate and into the surface.
- Page 6 Mounting the Boom Arm to Dry Wall Attaching the boom to drywall will require the use of wall fasteners (drywall anchors, molly bolts, or toggle bolts). Before mounting the boom to drywall, check the information that comes with the fasteners to confirm they can support the weight of the boom arm with your equipment.
- Page 7 Adjusting the Boom Arm Tilt Angle Important! Always keep one hand on the light when changing the position of the boom arm. Never exceed the published load capacity. To raise or lower the boom arm, loosen the ratchet handle. Push the boom arm up or down to the desired position.
-
Page 8: One-Year Limited Warranty
One-Year Limited Warranty This Impact product is warranted to the original purchaser to be free from defects in materials and workmanship under normal consumer use for a period of one (1) year from the original purchase date or thirty (30) days after replacement, whichever occurs later.