Quick Reference - Supermicro Supero X7DVL-E User Manual

Quick Reference (X7DVL-E)
Jumper Description
JBT1 CMOS Clear
JI 2 C1/JI 2 C2
SMB to PCI Slot#1/Slot#2 Speed
JPG1 VGA Enable
JPL1/ JPL2 GLAN1/GLAN2 Enable
JPWF PWR Supply Failure Detect
JWD Watch Dog
Connector
ATX PWR (JPW1)
CPU PWR (JPW3)
Alarm Reset (JAR)
Chassis Intru.(JL1)
COM1/COM2 (JCOM1/2) COM1/COM2 Serial Port Connectors
FAN 1-6
Floppy (J22)
FP Control (JF1)
GLAN 1/2 (JLAN1/2)
IDE1 (JIDE1)
Keyboard/Mouse (JKM1) Keyboard/Mouse Connectors
Parallel (J21)
PWR LED/SPKR (JD1)
PWR Force-On (JPF)
2
PWR SMB (JI C)
PWR Supply Fail (JPWF) Power Supply Failure (See Chapter 2)
SATA0-SATA5 (JS1-JS6) Intel SATA 0-5 Connectors
SIMLC (J16)
SGPIO1/2
Slot#1/Slot#2
Slot#3/Slot#4
Slot#5/Slot#6
SMB (J18)
USB 0/1 (J20)
USB 2/3/4/5 (JUSB1/2)
VGA (J15)
WOL (JWOL)
WOR (JWOR)
LED Indicator
D31
LE1
LE2/LE3 (*Note)
LE4/LE5
Note: When the Amber light is on for LE2, it indicates CPU1 VRM overheat. If
the Amber light is on for LE3, it indicates CPU2 VRM overheat.
Description
Primary 24-Pin ATX PWR Connector
+12V 8-pin PWR
Alarm Reset Header
Chassis Intrusion Header
Fans 1-6: System cooling fans, chassis fans, CPU fans
Floppy Disk Drive Connector
Front Control Panel Connector
G-bit Ethernet Ports
IDE1 Hard Drive
Parallel (Printer) Port
Power LED(pins1-3)/SpeakerHeader (pins 4-7)
Power Force-On
Power System Management (I
IPMI SIMM Low-profi le Zero Channel Slot
Serial General Purpose Input/Output Headers
PCI 33MHz Slots (Slot#1/Slot#2)
PCI-Exp. x8 (Slot#3)/PCI-Exp. x4 (Slot#4)
PCI-X 133MHz Slots (Slot#5/Slot#6)
System Management Bus Header
Back Panel USB 0/1
Front Panel USB 2/3 (JUSB1)/FPUSB 4/5 (JUSB2)
VGA Port
Wake-on-LAN Header
Wake-on-Ring Header
Description
Status LED (*See Chapter 2)
Power LED (*See Note 4 on the previous page.)
CPU1 VRM Overheat(LE2)/CPU2 VRM Overheat (LE3)
POST LED Indicators (*See Chapter 2)
1-5
Chapter 1: Introduction
Default Setting
See Chapter 2
Pins 2-3 (Disabled)
Pins 1-2 (Enabled)
Pins 1-2 (Enabled)
Off (Disabled)
Pins 1-2 (Reset)
2
C) Header