Advertisement
Quick Links
Trash Bag Kit
GrandStand
Model No. 147-0305
Installation
Loose Parts
Use the chart below to verify that all parts have been shipped.
Procedure
1
2
3
© 2023—The Toro® Company
8111 Lyndale Avenue South
Bloomington, MN 55420
®
Revolution Mower
Description
No parts required
Bag bracket
Storage-bag rod
Storage bag
Screw (5/16 inch)
No parts required
Register at www.Toro.com.
Form No. 3463-166 Rev A
Installation Instructions
Qty.
–
Prepare the machine.
1
1
Install the kit.
1
2
–
Complete the installation.
Original Instructions (EN)
Printed in the USA
All Rights Reserved
Use
*3463-166*
Advertisement
Related Manuals for Toro GrandStand 147-0305
Summary of Contents for Toro GrandStand 147-0305
- Page 1 Install the kit. Storage bag Screw (5/16 inch) – No parts required Complete the installation. *3463-166* © 2023—The Toro® Company Original Instructions (EN) 8111 Lyndale Avenue South Printed in the USA Bloomington, MN 55420 Register at www.Toro.com. All Rights Reserved...
- Page 2 Preparing the Machine Installing the Kit No Parts Required Parts needed for this procedure: Bag bracket Procedure Storage-bag rod Park the machine on a level surface. Storage bag Disengage the drives and the power take-off. Screw (5/16 inch) Shut off the machine and remove the key. Procedure Wait for all moving parts to stop.
- Page 3 Install the bag bracket to the tower plate using 2 screws (5/8 inch). Completing the Installation No Parts Required Procedure Install the rear access cover. g441095 Figure 4 1. Bag bracket 2. Screw (5/8 inch) Slide the storage-bag rod into the storage bag. g441112 Figure 7 Raise the cushion to the platform.
Need help?
Do you have a question about the GrandStand 147-0305 and is the answer not in the manual?
Questions and answers