Quad-Core PXI controller module. For complete configuration information (including BIOS configuration, ExpressCard installation, hard drive recovery, memory upgrade, and OS installation), full specifications, and I/O information, refer to the NI PXI-8840 Quad-Core User Manual. Contents Getting Started.......................... 2 Electromagnetic Compatibility Guidelines............... 2 Unpacking.........................
Remove the device from the package and inspect the device for loose components or any other sign of damage. Notify National Instruments if the device appears damaged in any way. Do not install a damaged device into your chassis. 2 | ni.com | NI PXI-8840 Quad-Core Getting Started Guide...
Refer to the NI PXI-8840 Quad-Core User Manual for full NI PXI-8840 Quad-Core specifications. For chassis that are not available in the online catalog at ni.com, contact National Instruments for supported operating temperatures. Processor should not throttle CPU frequency under reasonable, worst case processor work loads in high operating temperatures.
Installing the NI PXI-8840 Quad-Core into a PXI Chassis To install the NI PXI-8840 Quad-Core into a PXI chassis, complete the following steps. Plug in your chassis before installing the NI PXI-8840 Quad-Core. The power cord grounds the chassis and protects it from electrical damage while you install the module.
Page 6
DisplayPort connector. 12. Connect devices to ports as required by your system configuration. 13. Power on the display. Refer to the NI PXI-8840 Quad-Core User Manual for details. 14. Power on the chassis. 15. Verify that the controller boots. If it does not boot, refer to the Troubleshooting section.
When any IP or identification settings are changed, you are prompted to reboot the controller for the changes to take effect. Click Yes to reboot the RT 6 | ni.com | NI PXI-8840 Quad-Core Getting Started Guide Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...
GPIB and PXI Platform NIDRIVERS Services drivers preinstalled on the controller. Data Storage The NI PXI-8840 Quad-Core has the following data storage features: • 2.5 in. SATA notebook internal hard drive • USB storage support—USB CD/DVD-ROM, mass storage device, or floppy drive 8 | ni.com | NI PXI-8840 Quad-Core Getting Started Guide...
8. Reset Button 4. COM1 9. GPIB 5. USB 3.0 10. ExpressCard/34 (on ExpressCard variant only) Front Panel Connectors The following table lists various peripherals and their corresponding NI PXI-8840 Quad-Core external connectors, bus interfaces, and functions. Peripheral External Connector Description ®...
Page 11
PXI Trigger Connectivity The SMB connector on the NI PXI-8840 Quad-Core front panel can connect to or from any PXI backplane trigger line. A trigger allocation process is needed to prevent two resources from connecting to the same trigger line, resulting in the trigger being double-driven and possibly damaging the hardware.
How do I plug both a PS/2 mouse and PS/2 keyboard into the controller? The NI PXI-8840 Quad-Core has no PS/2 connector, and you need to use a USB Y-splitter cable as shown below, or a similar device, to connect both a PS/2 mouse and PS/2 keyboard.
Upgrade Information How do I upgrade system memory? You can change the amount of installed RAM on the NI PXI-8840 Quad-Core by upgrading the DDR3L SO-DIMM. Complete the following steps to upgrade the RAM. Remove the NI PXI-8840 Quad-Core from the PXI chassis.
Figure 6. Installing a DDR3L SO-DIMM in an NI PXI-8840 Quad-Core Controller 1. DDR3L SO-DIMM Socket 2. DDR3L SO-DIMM Module How do I flash a new BIOS? You can download the new BIOS from ftp.ni.com/support/pxi. For more information, refer to...
If the module does not work in these cases, it is likely damaged. Contact the module manufacturer for further troubleshooting. 16 | ni.com | NI PXI-8840 Quad-Core Getting Started Guide Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...
DoC for your product by visiting ni.com/certification. If your product supports calibration, you can obtain the calibration certificate for your product at ni.com/calibration. 18 | ni.com | NI PXI-8840 Quad-Core Getting Started Guide Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...