X6DHR-8G/X6DHR-iG User's Manual
Power LED/Speaker
On the JDI header, pins 1-3
for a power LED and pins 4-7 are
for the speaker. See the table on
the right for speaker pin defini-
tions. Note: The speaker connec-
tor pins are for use with an exter-
nal speaker.
If you wish to use
the onboard speaker, you should
close pins 6-7 with a jumper.
Wake-On-Ring
The Wake-On-Ring header is des-
ignated JWOR.
lows your computer to receive
and "wake-up" by an incoming call
to the modem when in suspend
state.
See the table on the right
for pin definitions. You must have
a Wake-On-Ring card and cable to
use this feature.
are
This function al-
2-18
Speaker Connector Pin
Definitions (JD1)
Pin
Number
Function
4
+
Red wire, Speaker data
5
Key
No connection
6
7
Speaker data
Wake-on-Ring
Pin Definitions
(JWOR1)
Pin
Number
Definition
1
Ground
2
Wake-up
WOR
PWRLED/
Speaker
Definition
Key