Power Led/Speaker Header (Jd1); Glan (Ethernet Port) - Supermicro X6DH8-G2 Plus User Manual

Power LED/Speaker
On the JDI header, pins 1-3 are for
a power LED and pins 4-7 are for
the speaker. See the table on the
right for speaker pin defi nitions. Note:
The speaker connector pins are for
use with an external speaker. If you
wish to use the onboard speaker, you
should close pins 6-7 with a jumper.
GLAN (Giga-bit Ethernet
Ports)
Two G-bit Ethernet ports are located
beside the VGA port on the IO back-
plane. This port accepts RJ45 type
cables.
B
GLAN1
GLAN2
C
JPF
PWR 8-pin
SMBus PWR
A
SCSI
2-17
Chapter 2: Installation
Speaker Connector
Pin Setting Defi nition
Pins 6-7 Internal Speaker
Pins 4-7 External Speaker
A. PWR LED/Speaker
B. GLAN 1
C. GLAN 2