Table of Contents
Advertisement
To
Do this
Press x.
Stop playback
Press X. Press again to resume
Pause
playback.
Select a track
During play or pause, press
> (to go forward) or .
(to go back).
Find a point in
Turn the shuttle clockwise
a track
(to go forward) or
counterclockwise (to go
back) until it clicks and hold
(or press and hold down J
or j on the remote).
Release it when you find
the desired point .
Select a CD
Press a DISC 1~3 button or
in stop mode
DISC SKIP EX-CHANGE (or
D. SKIP on the remote).
Play only the
Press PLAY MODE
CD you have
repeatedly until "CONTINUE
selected
1 DISC" or "SHUFFLE 1
DISC" appears.
Play all CDs
Press PLAY MODE repeatedly
until "CONTINUE ALL
DISCS" or "SHUFFLE ALL
DISCS" appears.
Remove the CD Press Z OPEN/CLOSE.
Exchange other
Press DISC SKIP
CDs while
EX-CHANGE.
playing
Adjust the
Turn VOLUME (or press VOL
volume
+/– on the remote).
Downloaded from:
https://www.usersmanualguide.com/
Tips
• You can switch from another source to the CD
player and start playing a CD just by pressing one
of the DISC 1~3 buttons (Automatic Source
Selection).
• If there is no CD in the player, "CD NO DISC"
appears in the display.
• When a disc tray holding a CD is selected (or the
CD in the disc tray is playing) the disc pointer
indicator lights. When a disc tray holding a CD is
not selected, the disc presence indicator lights, but
the disc pointer indicator does not light. When all
disc trays are empty, both the disc presence
indicator and disc pointer indicator light.
Not e
When a tray has not been read by the unit, the disc
presence indicator may light even though there is no
disc on the tray.
11
Advertisement
Table of Contents
