Climate Control System - Honda PASSPORT 2024 Owner's Manual

Climate Control System

Using Automatic Climate Control
The automatic climate control system maintains the interior temperature you select.
The system also selects the proper mix of heated or cooled air that will as quickly as
possible, raise or lower the interior temperature to your preference.
Dashboard and Dashboard and floor,
back of the center and back of the
console vents center console vents
AUTO Button
Driver's Side
Temperature
Control Switch
(On/Off) Button
SYNC (Synchronization) Button
Fan Control Button
(Recirculation) Button
Use the system when the engine is running.
1. Press the AUTO button.
2. Adjust the interior temperature using the driver's side or passenger's side
temperature control switch.
3. Press the ON/OFF button to cancel.
Floor vents Floor and
defroster
vents
A/C (Air Conditioning)
Button
Passenger's Side
Temperature Control
Switch
(Windshield Defroster)
Button
Continued
1Using Automatic Climate Control
If any buttons are pressed while using the climate
control system in auto, the function of the button
that was pressed will take priority.
The AUTO indicator will go off, but functions
unrelated to the button that was pressed will be
controlled automatically.
During Auto Idle Stop, air-conditioning is suspended,
and only the blower remains active.
If you do not want air-conditioning suspended, press
the Auto Idle Stop OFF button to cancel Auto Idle
Stop.
To prevent cold air from blowing in from outside, the
fan may operate at low speed for a while after the
AUTO button has been pressed.
While ECON mode is active, the climate control
system may have reduced cooling performance.
If the interior is very warm, you can cool it down
more rapidly by partially opening the windows,
turning the system on auto, and setting the
temperature to low. Change the fresh mode to
recirculation mode until the temperature cools down.
When you set the temperature to the lower or upper
limit, Lo or Hi is displayed.
213