Table of Contents
Advertisement
3 Get started
Caution
AAA alkaline batteries can be used to operate
the headphones, but cannot be charged with
this system.
Note
Only use Philips rechargeable shortened
sleeve NiMH batteries with your headphones.
Other types of rechargeable batteries cannot
be charged with this system.
Before using the headphones for the rst
time, charge the supplied batteries for at least
5 hours.
If the volume of the audio source is
insu cient, the transmitter automatically turns
o .
The Transmitter does not transmit audio
signal when you charge the battery.
Start up
1
Put the Antenna tube on the transmitter.
2
Connect the power adaptor to main
power socket and 3.5mm plug to
Transmitter.
3
Pull out the ear cushion on the left ear
shell. Insert the supplied AAA x2
batteries.
4
Plug in the charging cable to the
headphone's charging socket to charge
the headphones. The LED at the
transmitter will ashing "GREEN". When
charging nished, the LED will steady
"GREEN" at the transmitter.
Advertisement
Table of Contents
