Do you have a question about the FLASHER H-2220 and is the answer not in the manual?
Questions and answers
Aaron Graves
January 31, 2025
Can I hook up all 4 output together
1 comments:
Mr. Anderson
February 10, 2025
No, all four outputs of the Feniex FLASHER H-2220 cannot be directly connected together. Each output channel is rated at five amps, and combining them could exceed the designed electrical limits, potentially causing damage or malfunction. The flasher is designed to control multiple outputs separately with different flash patterns and synchronization options.
Page 1
Feniex Industries, Inc.. Feniex and the stylized Feniex logo are registered in the U.S.
Page 2
The products described in this document Feniex Industries' speakers, sirens, rocker are the property of Feniex Industries, Inc. It is panels, AM600 Beacons, Torch Lights, AI furnished by express license agreement only lightbars, AI Cubes, AM900 Work Lights, 8.5”...
Page 3
EQUIPMENT DIMENSIONS 2.6" 4" 1" Feniex University Before installing the 4x Flasher, watch our instructional video series, Feniex University. Use the link below: feniexuniversity.com Feniex Ind u s tr i es , In c. 1.800. 615.8350 / fe ni ex.com...
Page 4
‘Pattern Changer / Sync’ terminals together. 5. All 4 outputs are rated at 5 amps each. When the red LED is illuminated, outputs are set to 12V+ activation. Feniex Indu stries , Inc. 1 .800. 615 .8350 / feni ex.com...
Page 5
Right Arrow Fast (+) Center Out Slow (+) Center Out Fast (+) Brake Pop/Steady-on (+) Left Side 1 & 2 Steady On Right Side 3 & 4 Steady On Feniex Indu stries , Inc. 1 .800. 615 .8350 / feni ex.com...
Need help?
Do you have a question about the FLASHER H-2220 and is the answer not in the manual?
Questions and answers
Can I hook up all 4 output together
No, all four outputs of the Feniex FLASHER H-2220 cannot be directly connected together. Each output channel is rated at five amps, and combining them could exceed the designed electrical limits, potentially causing damage or malfunction. The flasher is designed to control multiple outputs separately with different flash patterns and synchronization options.
This answer is automatically generated