1. Manuals
  2. Brands
  3. REED Manuals
  4. Industrial Equipment
  5. C50SS
  6. Technical manual

REED C50SS Technical Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
C50SS TECHNICAL MANUALS
Operations, Maintenance, Schematics, Parts, Safety
OPERATIONS/
MAINTENANCE
Introduction
Warranty
Safety
Operation
Priming
Pumping
Clean-up
Maintenance
Check-List
Rev * REED LLC 2020
SCHEMATICS/
PARTS LISTS
Tanks
Hydraulic Manifolds
Accumulator
PCL Controls
SAFTEY MANUAL
AMERICAN CONCRETE
PUMPING ASSOCIATION
Introduction
Rules
Appendix

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the C50SS and is the answer not in the manual?

Questions and answers

Related Manuals for REED C50SS

Summary of Contents for REED C50SS

  • Page 1: Table Of Contents

    Pumping Train Group Warranty Power Train Group Safety Main Hydraulic Pump Operation Tanks Main Controls Hydraulic Manifolds Priming Accumulator Introduction Pumping Electrical Group General Safety Clean-up PCL Controls Rules Maintenance Frame Installation Appendix Check-List Available Options Rev * REED LLC 2020...
  • Page 2 www.reedpumps.com OPERATION and MAINTENANCE (909)287-2100 INTRODUCTION ......................2 WARRANTY ........................2 WARRANTY CLAIM FORM ........................4 SAFETY .......................... 5 SAFETY ALERT SYMBOLS AND SIGNAL WORDS................. 5 LOCKOUT / TAGOUT ..........................6 GENERAL SAFETY GUIDELINES ......................7 SAFETY DECALS ............................. 8 OPERATION .........................

  • Page 3: Introduction

    All safety guidelines, product descriptions, illustrations, and specifications found throughout this manual were in effect at the time the manual was released for printing. It should be noted; REED RESERVES THE RIGHT TO MAKE CHANGES IN DESIGN OR TO MAKE ADDITIONS TO OR IMPROVEMENTS IN THE PRODUCT WITHOUT IMPOSING ANY OBLIGATIONS UPON ITSELF TO INSTALL THEM ON PRODUCTS PREVIOUSLY MANUFACTURED.

  • Page 4: Warranty

    OPERATION and MAINTENANCE (909)287-2100 WARRANTY REED warrants each new Concrete equipment A,B, and C Series to be free of defects in material and workmanship under normal use and service for a period as follows: CONCRETE PUMP • 1 year or 1200 operating hours, whichever occurs first •...

  • Page 5: Warranty Claim Form

    Failure Date: Repair Date: Do not send part(s) until requested by REED or until claim is approved. All parts requested to be returned must have a Return Authorization Number provided by REED and shipping freight prepaid. Parts must ship within 30 days from REED request.

  • Page 6: Safety

    www.reedpumps.com OPERATION and MAINTENANCE (909)287-2100 SAFETY Everyone involved with the operation, maintenance, inspection, and repair of the concrete pump MUST READ and UNDERSTAND this manual and the accompanying Safety Manual. SAFETY ALERT SYMBOLS AND SIGNAL WORDS The following safety alert symbols, signals, and explanations are intended to warn the operator of hazardous and potentially hazardous situations.

  • Page 7: Lockout / Tagout

    OPERATION and MAINTENANCE (909)287-2100 LOCKOUT / TAGOUT The Lockout/Tagout procedure applies to all REED concrete placing equipment. Before performing any maintenance and/or repair on equipment; 1. Remove keys lock-out signage must be posted to indicate machine is currently under Lockout/Tagout.

  • Page 8: General Safety Guidelines

    Only Operate, Maintain, Inspect, and Repair In Accordance with This Operation Manual and the Safety Manual Performance and Safety Features Must Never Be Altered, Disconnected, or Removed Contact REED Technical Support and Service When Assistance Is Required Rev * 7 of 54...

  • Page 9: Safety Decals

    Association (CPMA) for your protection. They are placed at appropriate areas on the concrete pump to be constant warnings of dangers. Know and adhere to the information they provide. Contact REED Customer Service for complimentary replacements of safety decals, shipping charges may apply.
  • Page 10 www.reedpumps.com OPERATION and MAINTENANCE (909)287-2100 DO NOT OPERATE MACHINE WITHOUT ALL GRATES IN PLACE Rev * 9 of 54...
  • Page 11 www.reedpumps.com OPERATION and MAINTENANCE (909)287-2100 Rev * 10 of 54...
  • Page 12 www.reedpumps.com OPERATION and MAINTENANCE (909)287-2100 Rev * 11 of 54...
  • Page 13 www.reedpumps.com OPERATION and MAINTENANCE (909)287-2100 DECALS PLACED NEAR HOPPER GRATE AREA Rev * 12 of 54...
  • Page 14 www.reedpumps.com OPERATION and MAINTENANCE (909)287-2100 Rev * 13 of 54...
  • Page 15 www.reedpumps.com OPERATION and MAINTENANCE (909)287-2100 DECALS PLACED NEAR WATERBOX AREA DECALS PLACED NEAR OUTRIGGER CONTROL AREA Rev * 14 of 54...
  • Page 16 www.reedpumps.com OPERATION and MAINTENANCE (909)287-2100 DECALS PLACED ON SIDE PANEL AREA Rev * 15 of 54...
  • Page 17 www.reedpumps.com OPERATION and MAINTENANCE (909)287-2100 Rev * 16 of 54...
  • Page 18 www.reedpumps.com OPERATION and MAINTENANCE (909)287-2100 Rev * 17 of 54...

  • Page 19: Operation

    www.reedpumps.com OPERATION and MAINTENANCE (909)287-2100 OPERATION OPERATOR QUALIFICATIONS Everyone involved with the operation, maintenance, inspection, and repair of the concrete pump MUST READ and UNDERSTAND this operation manual and the accompanying Safety Manual. The following are a few general warnings for operator qualifications outlined in the Safety Manual.

  • Page 20: Serial Plate Idenification

    www.reedpumps.com OPERATION and MAINTENANCE (909)287-2100 SERIAL PLATE IDENIFICATION A-SERIES B-SERIES C-SERIES Rev * 19 of 54...

  • Page 21: Main Panel Serial Idenification

    www.reedpumps.com OPERATION and MAINTENANCE (909)287-2100 MAIN PANEL SERIAL IDENIFICATION Rev * 20 of 54...

  • Page 22: Product Description

    www.reedpumps.com OPERATION and MAINTENANCE (909)287-2100 PRODUCT DESCRIPTION The operation of the concrete equipment encompasses the use of hydraulic and electrical systems. This Concrete Pump is designed to safely mix wet concrete or material within its published ratings and specifications. Stability of the concrete pump during operation is provided by the ( ) outrigger legs and the front jack that can be raised or lowered from the concrete pump, to accommodate terrain.

  • Page 23: Controls

    www.reedpumps.com OPERATION and MAINTENANCE (909)287-2100 CONTROLS PLC MAIN CONTROLS B,C-SERIES EMERGENCY STOP This push/pull emergency switch is used to shut down the pump in an emergency by disabling the hydraulic systems. It does not shut the engine or motor off. Depress PUSH knob in to STOP operation. PULL knob out to REACTIVATE system.
  • Page 24 www.reedpumps.com OPERATION and MAINTENANCE (909)287-2100 PLC MAIN CONTROLS B,C-SERIES MAIN POWER KEY MAIN DIGITAL DISPLAY this is a three (3) this is where all position key switch. Turnkey to the ON position the pumping statues are displayed. to power control box. Shut down power by turning key to OFF position.
  • Page 25 www.reedpumps.com OPERATION and MAINTENANCE (909)287-2100 Rev * 24 of 54...
  • Page 26 www.reedpumps.com OPERATION and MAINTENANCE (909)287-2100 Rev * 25 of 54...
  • Page 27 www.reedpumps.com OPERATION and MAINTENANCE (909)287-2100 Rev * 26 of 54...
  • Page 28 www.reedpumps.com OPERATION and MAINTENANCE (909)287-2100 Rev * 27 of 54...
  • Page 29 www.reedpumps.com OPERATION and MAINTENANCE (909)287-2100 Rev * 28 of 54...
  • Page 30 www.reedpumps.com OPERATION and MAINTENANCE (909)287-2100 Rev * 29 of 54...
  • Page 31 www.reedpumps.com OPERATION and MAINTENANCE (909)287-2100 Rev * 30 of 54...

  • Page 32: Main Hydraulic Pump

    www.reedpumps.com OPERATION and MAINTENANCE (909)287-2100 GAUGES PUMP or DRIVE CYLINDER GAUGE indicates the hydraulic pressure requirement of the pumping cylinders to push material. Gauge reading varies depending upon many circumstances such as: material slump, material line type, size and length, vertical, uphill, downhill or horizontal placement, pumping speed, etc.

  • Page 33: Jobsite Set-Up

    www.reedpumps.com OPERATION and MAINTENANCE (909)287-2100 JOBSITE SET-UP Refer to the Safety Manual for set-up safety precautions not limited to the following guidelines: Ensure Machine Can Be Safely Operated in Set-Up Location Away from Hazards and Dangers Away from Slopes and Excavations Position Machine on As Solid and Level Ground As Possible Adjust height of Machine and remove Leg pins Secure Machine Positions with Leg Pins and Locks...

  • Page 34: Preparing For System Start-Up

    www.reedpumps.com OPERATION and MAINTENANCE (909)287-2100 PREPARING FOR SYSTEM START-UP Everyone involved with the operation, maintenance, inspection, and repair of the concrete pump MUST READ and UNDERSTANDS this manual and the Safety Manual. Refer to the Safety Manual for pumping and blockages safety precautions not limited to the following guidelines: Perform Required Inspection, Lubrication, and Maintenance Before, During, and After Pumping Operations...

  • Page 35: Operation Of Controls

    www.reedpumps.com OPERATION and MAINTENANCE (909)287-2100 OPERATION OF CONTROLS THE HOPPER GRATE MUST BE CLOSED (There is a safety interlock that guards against the opening of the mixer grate. SYSTEM START-UP Turn Pump ON Only When Hopper Is Full of Concrete Ensure the following conditions are met before activating pump: o PUMP Switch Is “OFF”...

  • Page 36: Recommended Maintenance Practices

    Engine Manufacturer Maintenance Schedule Must Be Followed Read Engine Manufacturer Manual REED has provided only general guidelines regarding engine maintenance and will not cover engine warranty claims. Rev * 35 of 54...
  • Page 37 www.reedpumps.com OPERATION and MAINTENANCE (909)287-2100 MAINTENANCE Hydraulic Pressure in All Systems Must Be ZERO Before and During Any Maintenance Procedures Engine Must Be Turned OFF and Lockout / Tagout Procedures Must Be Followed Before and During Any Maintenance Procedures Rev * 36 of 54...

  • Page 38: Main Controls

    www.reedpumps.com OPERATION and MAINTENANCE (909)287-2100 GENERAL MAINTENANCE AREAS Perform scheduled inspections to identify and detect any potential problems. The list presented should be inspected and checked on a regular basis and is a recommended minimum. MAIN CONTROLS • Control box in good condition, sealed, not damaged •...

  • Page 39: Lubrication

    www.reedpumps.com OPERATION and MAINTENANCE (909)287-2100 LUBRICATION Rapid wear and possible shutdown will result if the unit is operated with inadequate lubrication. Follow the recommendations stated herein, and if needed increase the application of lubricants above these recommendations when the equipment is subject to heavy usage.
  • Page 40 www.reedpumps.com OPERATION and MAINTENANCE (909)287-2100 LUBRICATION POINTS The following graphics are for REFERENCE ONLY. IF EQUIPPED WITH DUAL (2) HYDRAULIC SHIFT CYLINDERS, RELIEVE SHIFT CIRCUIT HYDRAULIC PRESSURE TO PROPERLY GREASE HYDRAULIC SHIFT CYLINDERS AND BELL CRANK LUBRICATION POINTS Rev * 39 of 54...
  • Page 41 www.reedpumps.com OPERATION and MAINTENANCE (909)287-2100 LUBRICATION POINTS S-TUBE OUTLET GREASE POINTS AGITATOR GREASE POINTS HYDRAULIC MOTOR SIDE GREASE POINTS BEARING SIDE GREASE POINTS Rev * 40 of 54...
  • Page 42 www.reedpumps.com OPERATION and MAINTENANCE (909)287-2100 HYDRAULIC SYSTEM Hydraulic pumps are used to supply the flow of oil necessary to operate actuators of the concrete pump. Contamination of the Oil Is the Leading Contributor to System Malfunctions Extreme care must be exercised to prevent contaminants from entering the system. Always cap or plug open ports and hydraulic lines.
  • Page 43 www.reedpumps.com OPERATION and MAINTENANCE (909)287-2100 HYDRAULIC SYSTEM MAINTENANCE ITEM DESCRIPTIONS FLUID Check fluid level and oil clarity daily with sight gauge provided. Maintain level at full mark. Add hydraulic oil through the return filter fill port when necessary. TANK BREATHER Clean every 50 hours of operation.
  • Page 44 www.reedpumps.com OPERATION and MAINTENANCE (909)287-2100 ADDING HYDRAULIC FLUID There are a few common methods for filling the hydraulic tank as described below. Exercise extreme care when adding fluid to the hydraulic tank to avoid contamination. • To prevent any dirt or water from entering the hydraulic tank, thoroughly clean area around the return filter fill port plug, the vented fill cap or the inspection cover.
  • Page 45 www.reedpumps.com OPERATION and MAINTENANCE (909)287-2100 FILL PORT FILTER ELEMENT GASKET RETURN FILTER Do Not Use Cloth for Straining Fluid Lint Is a Contaminant Harmful to the Hydraulic System FILTER ELEMENT O-RING Rev * 44 of 54...
  • Page 46 www.reedpumps.com OPERATION and MAINTENANCE (909)287-2100 To change the filter elements: 1. Shut off machine. 2. VERIFY PRESSURES IN ALL CIRCUITS READ ZERO! 3. Wipe clean any dirt and grime from area surrounding filter housing 4. Loosen the filter cover plate bolts 5.

  • Page 47: Component Replacement

    COMPONENT REPLACEMENT When parts are worn, do not delay in replacement. Continued usage with worn parts may lead to damage of other components. Please contact the REED Service Department or your local dealer for technical support. Rev * 46 of 54...

  • Page 48: Pump Maintenance Schedule And Checklists

    www.reedpumps.com OPERATION and MAINTENANCE (909)287-2100 PUMP MAINTENANCE SCHEDULE AND CHECKLISTS Providing a maintenance schedule defined specifically by run hours or yardage pumped serves only as a general guideline given the large amount of variables a unit might be subject to, such as weather and ambient temperature conditions, jobsite conditions, material differences of mix design, the load burden the unit is typically subject to, i.e.
  • Page 49 www.reedpumps.com OPERATION and MAINTENANCE (909)287-2100 INITIAL 50 HOUR MAINTENANCE CHECKLIST Actual Hours Date # Maintenance Description Initials Change engine oil and filters (see engine manufacturer maintenance schedule for additional requirements) IF REQUIRED Additional Notes: Change hydraulic oil filters Inspect hydraulic hoses and fittings for any signs of external wear or damage Additional Notes: Rev * 48 of 54...
  • Page 50 www.reedpumps.com OPERATION and MAINTENANCE (909)287-2100 EVERY 100 HOUR MAINTENANCE CHECKLIST Actual Hours Date Maintenance Description Initials Clean hydraulic tank breather Inspect all structural components (check frame, hopper, and other structural members for any damage) Additional Notes: Additional Notes: Check coolers and radiators for dirt or debris. Clean as necessary Check condition of engine drive belts.
  • Page 51 www.reedpumps.com OPERATION and MAINTENANCE (909)287-2100 EVERY 250 HOUR MAINTENANCE CHECKLIST Actual Hours Date # Maintenance Description Initials Change hydraulic filters (or change more frequently as indicated by indicator gauge on filter) Additional Notes: Check that all electrical wires, cables, terminals, plugs are in good condition Additional Notes: Change engine oil and filters (see engine manufacturer guide for all engine requirements) IF REQUIRED...
  • Page 52 www.reedpumps.com OPERATION and MAINTENANCE (909)287-2100 EVERY 250 HOUR MAINTENANCE CHECKLIST Actual Hours Date Maintenance Description Initials Control console in good condition Switch in good condition Additional Notes: Rev * 51 of 54...
  • Page 53 www.reedpumps.com OPERATION and MAINTENANCE (909)287-2100 EVERY 500 HOUR MAINTENANCE CHECKLIST Actual Hours Date Maintenance Description Initials Inspect hydraulic hoses and fittings for any signs of external wear or damage Additional Notes: Inspect all wear parts and change as necessary (excessive wear may cause inefficient performance and/or shutdown of operation) Additional Notes: Change hydraulic fluid, clean the reservoir and the suction strainers within...
  • Page 54 www.reedpumps.com OPERATION and MAINTENANCE (909)287-2100 EVERY 500 HOUR MAINTENANCE CHECKLIST Actual Hours Date ADDITIONAL GENERAL NOTES: Rev * 53 of 54...

  • Page 55: Notes

    www.reedpumps.com OPERATION and MAINTENANCE (909)287-2100 NOTES Rev * 54 of 54...
  • Page 93 DEUTSCH 128 PLUG TIER 4 PIN FROM DESCRIPTION WIRE SIZE/COLOR FROM DESCRIPTION WIRE SIZE/COLOR MVEC MAIN PWR V+ (BATTERY) RED 14 AWG 65 BUSS#17-3 VOLUME + B- WHT 18/19 AWG MVEC MAIN PWR V+ (BATTERY) RED 14 AWG 66 BUSS#17-4 VOLUME - B- WHT 18/19 AWG MVEC MAIN PWR...
  • Page 94 BUSS 3 BUSS 8 BUSS 5 BUSS 4 BUSS 1 BUSS 2...
  • Page 97 13822 Oaks Avenue C-SERIES Chino, CA 91710 reedpumps.com HYDRAULIC / ELECTRICAL SCHEMATICS HYDRAULICS...
  • Page 98 13822 Oaks Avenue C-SERIES Chino, CA 91710 reedpumps.com HYDRAULIC / ELECTRICAL SCHEMATICS TRAILER HARNESS...
  • Page 99 13822 Oaks Avenue C-SERIES Chino, CA 91710 reedpumps.com HYDRAULIC / ELECTRICAL SCHEMATICS 89051 HARNESS...
  • Page 100 13822 Oaks Avenue C-SERIES Chino, CA 91710 reedpumps.com HYDRAULIC / ELECTRICAL SCHEMATICS 89113 PLC WIRING HARNESS FROM DESCRIPTION WIRE SIZE/COLOR FROM DESCRIPTION WIRE SIZE/COLOR MVEC MAIN PWR V+ (BATTERY) RED 14 AWG 65 BUSS#17-3 VOLUME + B- WHT 18/19 AWG MVEC MAIN PWR V+ (BATTERY) RED 14 AWG...
  • Page 101 13822 Oaks Avenue C-SERIES Chino, CA 91710 reedpumps.com HYDRAULIC / ELECTRICAL SCHEMATICS...
  • Page 102 13822 Oaks Avenue C-SERIES Chino, CA 91710 reedpumps.com HYDRAULIC / ELECTRICAL SCHEMATICS...
  • Page 103 13822 Oaks Avenue C-SERIES Chino, CA 91710 reedpumps.com HYDRAULIC / ELECTRICAL SCHEMATICS...
  • Page 104 13822 Oaks Avenue C-SERIES Chino, CA 91710 reedpumps.com HYDRAULIC / ELECTRICAL SCHEMATICS...
  • Page 105 13822 Oaks Avenue C-SERIES Chino, CA 91710 reedpumps.com HYDRAULIC / ELECTRICAL SCHEMATICS (DEF) SYSTEM CONNECTION...
  • Page 106 13822 Oaks Avenue C-SERIES Chino, CA 91710 reedpumps.com HYDRAULIC / ELECTRICAL SCHEMATICS (DEF) SYSTEM CONNECTION...
  • Page 108 C50SS-V21 13822 Oaks Avenue Chino, CA 91710 reedpumps.com PARTS (909) 287 - 2100 PARTS ............................3 PUMPING TRAIN GROUP ASSEMBLY ................3 S-TUBE ........................... 5 5” OUTLET ASSEMBLY ..................5 5” OUTLET SEAL KIT INSTALLATION ..............6 CARBIDE WEAR PLATE ASSEMBLY..............7 DUAL SHIFT BELL CRANK ASSEMBLY ................
  • Page 109 C50SS-V21 13822 Oaks Avenue Chino, CA 91710 reedpumps.com PARTS (909) 287 - 2100 MD3 DISPLAY MODULE ..................65 ESTOP, KEY ASSEMBLY, PLUGS ..............66 BUSSES, CONNECTORS, PINS ............... 67 SERIAL PLATE, REMOTE PLUG ................. 68 BUSS BAR SET-UP ...................... 69 CAN PUSH BUTTON SWITCH PLUG ................

  • Page 110: Pumping Train Group Assembly

    C50SS-V21 13822 Oaks Avenue Chino, CA 91710 reedpumps.com PARTS (909) 287 - 2100 PARTS PUMPING TRAIN GROUP ASSEMBLY FLUSH BOX TOP VIEW DETAIL C DETAIL A DETAIL B ID # PART # PART DESCRIPTION QUANTITY 87549D PUMP CELL ASSY C50S DUAL 86121A HOPPER WELDMENT, 6”...
  • Page 111 C50SS-V21 13822 Oaks Avenue Chino, CA 91710 reedpumps.com PARTS (909) 287 - 2100 PUMPING TRAIN ASSEMBLY CONTINUED DETAIL E 300 FT-LB 300 FT-LB DETAIL D 280 FT-LB 280 FT- ID # PART # PART DESCRIPTION QUANTITY 86023 TIE ROD, 1" X 57½”...

  • Page 112: S-Tube

    C50SS-V21 13822 Oaks Avenue Chino, CA 91710 reedpumps.com PARTS (909) 287 - 2100 S-TUBE 5” OUTLET ASSEMBLY DETAIL A VIEW A ID # PART # PART DESCRIPTION QUANTITY 86321 OUTLET ASSEMBLY HHCS, 5/8 – 18X3” ¼ “ GR 8 LOCK NUT, 5/8 -18 GREASE FITTING, 1/8”...

  • Page 113: 5" Outlet Seal Kit Installation

    C50SS-V21 13822 Oaks Avenue Chino, CA 91710 reedpumps.com PARTS (909) 287 - 2100 5” OUTLET SEAL KIT INSTALLATION VIEW A GROOVE IN SEAL ID # PART # PART DESCRIPTION QUANTITY 79895 SEAL KIT 77762 O-RING-#257 BUNA 90 77761 O-RING-#264 BUNA 90...

  • Page 114: Carbide Wear Plate Assembly

    C50SS-V21 13822 Oaks Avenue Chino, CA 91710 reedpumps.com PARTS (909) 287 - 2100 CARBIDE WEAR PLATE ASSEMBLY DETAIL B CONCRETE CYLINDER S TUBE ID # PART # PART DESCRIPTION QUANTITY 86149 O-RING, #259 BUENA 70 FHCS, ¾ - 10X 4½” GR 8 FHCS, ¾...

  • Page 115: Dual Shift Bell Crank Assembly

    C50SS-V21 13822 Oaks Avenue Chino, CA 91710 reedpumps.com PARTS (909) 287 - 2100 DUAL SHIFT BELL CRANK ASSEMBLY DETAIL C ID # PART # PART DESCRIPTION QUANTITY 87339-2 S-TUBE SHIFT GROUP, DUAL 85956 BELL CRANK, 3” SPLINE, DUAL 86985 SPACER, S-TUBE NUT...

  • Page 116: Dual Shift Cylinder Assembly

    C50SS-V21 13822 Oaks Avenue Chino, CA 91710 reedpumps.com PARTS (909) 287 - 2100 DUAL SHIFT CYLINDER ASSEMBLY DETAIL C ID # PART # PART DESCRIPTION QUANTITY 87333HT SWING RAM 3.0 X 5.50 87333HT-SK SEAL KIT 9 of 90 C50SS-V21...

  • Page 117: Dual Shift Assembly

    C50SS-V21 13822 Oaks Avenue Chino, CA 91710 reedpumps.com PARTS (909) 287 - 2100 DUAL SHIFT ASSEMBLY DETAIL C 5 or 6 SPACE AS REQUIRED FOR PROPER S-TUBE ALIGNMENT SPACE AS REQUIRED FOR PROPER S-TUBE 5 or 6 ALIGNMENT ID #...

  • Page 118: 6" Piston Cup Assembly

    C50SS-V21 13822 Oaks Avenue Chino, CA 91710 reedpumps.com PARTS (909) 287 - 2100 6” PISTON CUP ASSEMBLY DETAIL D 6, 7 ID # PART # PART DESCRIPTION QUANTITY 86024 PISTON COUPLING, 8.75 LONG 77194 PISTON-CONC. ADAPTER 6" 77120 WEAR RING (GUIDE BAND) 6"...

  • Page 119: Drive Cylinder Assembly

    C50SS-V21 13822 Oaks Avenue Chino, CA 91710 reedpumps.com PARTS (909) 287 - 2100 DRIVE CYLINDER ASSEMBLY DETAIL E 86225 – SK SEAL KIT ASSEMBLY ID # PART # PART DESCRIPTION QUANTITY 78961 CHECK VALVE-5K PSI O-RING 86748 FITTING-MB-MJ90-6-6 ELBOW, MB-MB90-6-6 86225HT HYDRAULIC CYL 4.00 X 2.50 X 41.75...

  • Page 120: Agitator

    C50SS-V21 13822 Oaks Avenue Chino, CA 91710 reedpumps.com PARTS (909) 287 - 2100 AGITATOR DETAIL F VIEW F ID # PART # PART DESCRIPTION QUANTITY 88041-AO AGITATOR ASSEMBLY 70211 FLANGE SEAL S/W 70212 SEAL REMIXER 85978 BEARING, BALL, PLAIN 85979...
  • Page 121 C50SS-V21 13822 Oaks Avenue Chino, CA 91710 reedpumps.com PARTS (909) 287 - 2100 AGITATOR ASSEMBLY CONTINUED DETAIL G NOTE* Install Grove as shown VIEW G ID # PART # PART DESCRIPTION QUANTITY GREASE FITTING, 1/8” NPT STRAIT 70219 REMIX SHAFT BUSHING...

  • Page 122: Safety Grate

    C50SS-V21 13822 Oaks Avenue Chino, CA 91710 reedpumps.com PARTS (909) 287 - 2100 SAFETY GRATE ID # PART # PART DESCRIPTION QUANTITY 87369 PROXIMITY SENSOR PNP HOPPER GRATE 801902-006 CLAMP,18MM TUBE CLAMP SET 87997 COVER WELD PROX SWITCH HOPPER 15 of 90...

  • Page 123: Grate Assembly

    C50SS-V21 13822 Oaks Avenue Chino, CA 91710 reedpumps.com PARTS (909) 287 - 2100 GRATE ASSEMBLY 7, 8, 9 10, 11, ID # PART # PART DESCRIPTION QUANTITY 87835 GRATE WELDMENT, STD HOPPER 87857 PIN WELDMENT LONG 87858 PIN WELDMENT SHORT...

  • Page 124: Clean Out Door Assembly

    13822 Oaks Avenue C50SS-V21 Chino, CA 91710 reedpumps.com PARTS 1-(909) 287 - 2100 CLEAN OUT DOOR ASSEMBLY ID # PART # PART DESCRIPTION QUANTITY 86988 DOOR WELDMENT, CLEAN OUT 86559 BLOCK, CLEAN OUT DOOR, LH 86560 BLOCK, CLEAN OUT DOOR, RH 86922 SHOULDER SCREW 1"...

  • Page 125: Power Train Group

    13822 Oaks Avenue C50SS-V21 Chino, CA 91710 reedpumps.com PARTS 1-(909) 287 - 2100 POWER TRAIN GROUP ENGINE TIER-4 ID # PART # PART DESCRIPTION QUANTITY 88931 POWERTRAIN ASSY CUMMINS-T4 /REXROTH 88794 ENGINE QSB6.7 225HP. CUMMINS T4 FINAL 88036 FITTING FUEL LINE, QUICK DISCONECT...

  • Page 126: Main Hydralic Pump 180Cc

    13822 Oaks Avenue C50SS-V21 Chino, CA 91710 reedpumps.com PARTS 1-(909) 287 - 2100 MAIN HYDRALIC PUMP 180cc REXROTH GEAR PUMP FLUSHING VALVE MANIFOLD MAIN HYDRALIC PUMP 87574-P 19 of 90 C50SS-V21...
  • Page 127 13822 Oaks Avenue C50SS-V21 Chino, CA 91710 reedpumps.com PARTS 1-(909) 287 - 2100 MAIN HYDRALIC PUMP 180cc REXROTH ID # PART # PART DESCRIPTION QUANTITY W-108121 PUMP, AVG180 CC A PAD WITH FLUSHING VALVE 801888-005 SWIVEL ELBOW-18L BANJO ELBOW 18LX22MX1.5 801874-004 BANJO ELBOW 12LX16MX1.5...
  • Page 128 13822 Oaks Avenue C50SS-V21 Chino, CA 91710 reedpumps.com PARTS 1-(909) 287 - 2100 REXROTH ID # PART # PART DESCRIPTION QUANTITY FITTING-MB-MJ-8-10 81002 ADAPTER-18L X SAE 10 801876-006 ADAPTER-STR 10L(M) X SAE6 87469 PLUG O-RING BOSS SAE-4 87568 PRESSURE REDUCING ELECTRO PROPORSIONAL...
  • Page 129 13822 Oaks Avenue C50SS-V21 Chino, CA 91710 reedpumps.com PARTS 1-(909) 287 - 2100 MAIN HYDRALIC PUMP 180cc REXROTH TORQUE 30-35 FT LB ID # PART # PART DESCRIPTION QUANTITY SWIVEL ELBOW-30S 801888-007 SPLIT FLANGE-CODE 62-20 SAE 86265-003 87458 SHCS, M14X200-GR 12.9...
  • Page 130 13822 Oaks Avenue C50SS-V21 Chino, CA 91710 reedpumps.com PARTS 1-(909) 287 - 2100 MAIN HYDRALIC PUMP 180cc REXROTH ID # PART # PART DESCRIPTION QUANTITY 86952 MANIFOLD ASSY, CLOSE LOOP MASTER CONTROL 86952-M MANIFOLD, FOR 86952 ASSY, (STEEL, MACHINED) 801778...
  • Page 131 13822 Oaks Avenue C50SS-V21 Chino, CA 91710 reedpumps.com PARTS 1-(909) 287 - 2100 MAIN HYDRALIC PUMP 180cc REXROTH ID # PART # PART DESCRIPTION QUANTITY 87571-1 GEAR PUMP, 25/11.3CC RH A-PAD SPL 86728-014 ELBOW, MB-MJ90-10-10 ELBOW, MB-MJ45-10-12 86728-015 BOLT, M12X1.75X35 HEX 10.9 DIN933...
  • Page 132 13822 Oaks Avenue C50SS-V21 Chino, CA 91710 reedpumps.com PARTS 1-(909) 287 - 2100 MAIN HYDRALIC PUMP 180cc REXROTH ID # PART # PART DESCRIPTION QUANTITY 801875-004 BANGO ELBOW-25S X 1 BSPP 801526 ADAPTOR-STR-35L (M) X M48X2.0 (M) ELBOW-18L 801888-005 ADAPTER-18L X ¾ BSPP 801873-011 ADAPTER-90L-35L(f) x 1.50 HOSE...
  • Page 133 13822 Oaks Avenue C50SS-V21 Chino, CA 91710 reedpumps.com PARTS 1-(909) 287 - 2100 MAIN HYDRALIC PUMP 180cc REXROTH ID # PART # PART DESCRIPTION QUANTITY 87461 HOSE, THERMOPLASTIC, 12L ENDS-24” ADAPTOR-STR-35L(M) X SAE16(M) 801517 SWIVEL BRANCH TEE – 25S 801889-006 HOSE, 10G6K-18FDLX-18FDLX-31”...
  • Page 134 13822 Oaks Avenue C50SS-V21 Chino, CA 91710 reedpumps.com PARTS 1-(909) 287 - 2100 MAIN HYDRALIC PUMP 180cc REXROTH ID # PART # PART DESCRIPTION QUANTITY W-105076 FITTING, GAUGE FITTING –L12 SWIVEL, RUN TEE, 12L 801890-003 TUBE REDUCER-18LX12L 801891-008 ADAPTER 18LX3/4 BSPP...

  • Page 135: Exhaust After Treatment Tier4

    13822 Oaks Avenue C50SS-V21 Chino, CA 91710 reedpumps.com PARTS 1-(909) 287 - 2100 EXHAUST AFTER TREATMENT TIER4 ID # PART # PART DESCRIPTION QUANTITY BRACKET W-114850 RUBBER BUFFER, 65X22.5X26 89348 HEAT BLANKET 89424 T4 ROOF HARNESS SUPPORT, C-SERIES 73748 RUBBER BUMPER 89638 ROUND SPRING ST.

  • Page 136: Def Coolant Group

    13822 Oaks Avenue C50SS-V21 Chino, CA 91710 reedpumps.com PARTS 1-(909) 287 - 2100 DEF COOLANT GROUP ID # PART # PART DESCRIPTION QUANTITY 89267 DEF COOLANT GROUP 88794-DT DEF TANK 89346 HOLD DOWN STRAP, 1” 29 of 90 C50SS-V21...
  • Page 137 13822 Oaks Avenue C50SS-V21 Chino, CA 91710 reedpumps.com PARTS 1-(909) 287 - 2100 DEF COOLANT GROUP ID # PART # PART DESCRIPTION QUANTITY 88794-CCV VALVE, COOLANT CONTROL, 11EA2V 89268 COOLANT MANIFOLD 89268-B MANIFOLD BRACKET 89269 BRASS FITTING, ½” NPT TO 5/8” QC 89269-1 QUICK CONNECT FITTING, 5/8”...
  • Page 138 13822 Oaks Avenue C50SS-V21 Chino, CA 91710 reedpumps.com PARTS 1-(909) 287 - 2100 DEF COOLANT GROUP ID # PART # PART DESCRIPTION QUANTITY DEF PUMP FILTER, DEF PUMP 88794-001 DEF HOSE, SUCTION 88794-002 DEF HOSE, RETURN LINE 88794-003 DEF HOSE, PRESSURE LINE...

  • Page 139: Tanks

    13822 Oaks Avenue C50SS-V21 Chino, CA 91710 reedpumps.com PARTS 1-(909) 287 - 2100 TANKS FUEL TANK ASSEMBLY ID # PART # PART DESCRIPTION QUANTITY 87536 FUEL TANK ASSY C-SERIES 87535 FUEL TANK WELDMENT, C-SERIES 77191 FUEL GAUGE, 18 IN 10297 PLUG-GALV 1/2"...
  • Page 140 13822 Oaks Avenue C50SS-V21 Chino, CA 91710 reedpumps.com PARTS 1-(909) 287 - 2100 TANKS FUEL TANK ASSEMBLY CONT BOTTOM ID # PART # PART DESCRIPTION QUANTITY 10297 PLUG-GALV 1/2" (AS NEEDED) 87566 FITTING BARBED JIC-STEM, 3/8 87567 FITTING 90 DEG. METRIC TO JIC 85669-004 HOSE, 8FLH-10FJX-10FX90S-24.00...

  • Page 141: Hydraulic Tank Assembly

    13822 Oaks Avenue C50SS-V21 Chino, CA 91710 reedpumps.com PARTS 1-(909) 287 - 2100 HYDRAULIC TANK ASSEMBLY ID # PART # PART DESCRIPTION QUANTITY 88915 HYD TANK ASSY C-SERIES 88911 HYDRAULIC TANK WELDMENT, C-SERIES,2015 85529 ENDCOVER KIT, 12 IN W/DRAIN 85867 GASKET- END COVER 12”...

  • Page 142: Hydraulic Tank Filter Assembly

    13822 Oaks Avenue C50SS-V21 Chino, CA 91710 reedpumps.com PARTS 1-(909) 287 - 2100 HYDRAULIC TANK FILTER ASSEMBLY ID # PART # PART DESCRIPTION QUANTITY 801496-1 FILTER ASSEMBLY, DUAL SUCTION HOUSING 802585-1 FILTER ELEMENT, 25 MICRON, PN 801496-1 801496-1G GAUGE, SUCTION FILTER (SPARE PART) ADAPTER,STR-35-LX1.00”(MBSPP)SOFT...
  • Page 143 13822 Oaks Avenue C50SS-V21 Chino, CA 91710 reedpumps.com PARTS 1-(909) 287 - 2100 HYDRAULIC TANK FILTER ASSEMBLY ID # PART # PART DESCRIPTION QUANTITY FILTER ASSEMBLY, SINGLE SUCTION HOUSING FILTER ELEMENT, 25 MICRON, PN 801496-1 GAUGE, SUCTION FILTER (SPARE PART) ADAPTER,STR-35-LX1.00”(MBSPP)SOFT...
  • Page 144 13822 Oaks Avenue C50SS-V21 Chino, CA 91710 reedpumps.com PARTS 1-(909) 287 - 2100 HYDRAULIC TANK ASSEMBLY CONTINUED ID # PART # PART DESCRIPTION QUANTITY 801876-008 ADAPTER-25S X SAE 16 801890-006 SWIVEL RUN TEE – 25S 801888-006 SWIVEL ELBOW – 25S...

  • Page 145: S-Tube Circuit Manifold Assembly

    13822 Oaks Avenue C50SS-V21 Chino, CA 91710 reedpumps.com PARTS 1-(909) 287 - 2100 S-TUBE CIRCUIT MANIFOLD ASSEMBLY SHCS 3/8-16 x 2 3/4” O-RING UNDERNEATH MANIFOLD 38 of 90 C50SS-V21...

  • Page 146: S-Tube Circuit Manifold Cont

    13822 Oaks Avenue C50SS-V21 Chino, CA 91710 reedpumps.com PARTS 1-(909) 287 - 2100 S-TUBE CIRCUIT MANIFOLD CONT. ID # PART # PART DESCRIPTION QUANTITY 87334 MANIFOLD, S TUBE CIRCUIT ASSY (COMPLETE) 87918 MANIFOLD MACHINED BLOCK FOR 87334 87919 CARTRIDGE FLOW CONTROL FOR 87334...

  • Page 147: S-Tube Manifold Porting

    13822 Oaks Avenue C50SS-V21 Chino, CA 91710 reedpumps.com PARTS 1-(909) 287 - 2100 S-TUBE MANIFOLD PORTING FRONT BOTTOM OPERATOR SIDE NON-OPERATOR SIDE 40 of 90 C50SS-V21...

  • Page 148: Accumulator Assembly

    13822 Oaks Avenue C50SS-V21 Chino, CA 91710 reedpumps.com PARTS 1-(909) 287 - 2100 ACCUMULATOR ASSEMBLY FRAME RAIL ID # PART # PART DESCRIPTION QUANTITY W-103616 ACCUMULATOR 6 LITER W-105630 BLADDER REPAIR KIT FOR #W-103616 73171 ACCUMULATOR BKT.W/CLOSING HARDWARE 801028 GROMMET, ACCUMULATOR 87471 ADAPTER-STR 1 ¼”...

  • Page 149: Electrical Group

    13822 Oaks Avenue C50SS-V21 Chino, CA 91710 reedpumps.com PARTS 1-(909) 287 - 2100 ELECTRICAL GROUP PROXIMITY SWITCHES ID # PART # PART DESCRIPTION QUANTITY 89345 ELECTRICAL GROUP C-SERIES, PLC TIER4 CUMM 77998 PROXIMITY SENSOR NPN FLUSH BOX MOUT 10522 STRAIN RELIEF 30240 GASKET LIQUID TITE ½”...

  • Page 150: Temperture Sensor

    13822 Oaks Avenue C50SS-V21 Chino, CA 91710 reedpumps.com PARTS 1-(909) 287 - 2100 TEMPERTURE SENSOR ID # PART # PART DESCRIPTION QUANTITY 89279 SENSOR TEMPERTURE FOR TIER4 CUMMINS 89633 ADAPTER TEMP SENSOR FOR 89279 43 of 90 C50SS-V21...

  • Page 151: Battery Assembly

    13822 Oaks Avenue C50SS-V21 Chino, CA 91710 reedpumps.com PARTS 1-(909) 287 - 2100 BATTERY ASSEMBLY ID # PART # PART DESCRIPTION QUANTITY 77075 BATTERY-12V 1000 CCA31 89330-N CABLE, 61” BATTERY (BLK) 4/0 89330-P CABLE, 63”, BATTERY (RED) 4/0 89330-N CABLE, 12” BATTERY (BLK) 4/0 89330-P CABLE, 12”...

  • Page 152: Trailer Harness And Breakaway

    13822 Oaks Avenue C50SS-V21 Chino, CA 91710 reedpumps.com PARTS 1-(909) 287 - 2100 TRAILER HARNESS AND BREAKAWAY ID # PART # PART DESCRIPTION QUANTITY 86532 TRAILER HARNESS- C-SERIES 77705 BREAK-AWAY KIT 86579 TRAILER PLUG 7C FLAT PI 72949 GROMMET 72813...

  • Page 153: Tail Lights, Fenders

    13822 Oaks Avenue C50SS-V21 Chino, CA 91710 reedpumps.com PARTS 1-(909) 287 - 2100 TAIL LIGHTS, FENDERS UNDERSIDE ID # PART # PART DESCRIPTION QUANTITY 72948 TAIL LIGHT 87665 LOOM, CLAMP 7/8" 72949 GROMMET 85394 FENDER, OPERATOR SIDE, C SERIES PAINTED...

  • Page 154: Tier-4 Main Wiring Harness

    13822 Oaks Avenue C50SS-V21 Chino, CA 91710 reedpumps.com PARTS 1-(909) 287 - 2100 TIER-4 MAIN WIRING HARNESS 47 of 90 C50SS-V21...

  • Page 155: Tier- 4 Roof, Top Harness

    13822 Oaks Avenue C50SS-V21 Chino, CA 91710 reedpumps.com PARTS 1-(909) 287 - 2100 TIER- 4 ROOF, TOP HARNESS 48 of 90 C50SS-V21...
  • Page 156 13822 Oaks Avenue C50SS-V21 Chino, CA 91710 reedpumps.com PARTS 1-(909) 287 - 2100 ID # PART # PART DESCRIPTION QUANTITY 89051 WIRING HARNESS, C SERIES PLC TIER 4 87540 CABLE SOLENOID 88243 CABLE WITH 2 DIN PLUGS 5M 87540-1 CABLE SOL VALVE, W/DIN PLUG...
  • Page 157 13822 Oaks Avenue C50SS-V21 Chino, CA 91710 reedpumps.com PARTS 1-(909) 287 - 2100 ID # PART # PART DESCRIPTION QUANTITY 89157 DEUTSCH RECEPTACLE 128 CONTACT 89116 DEUTSCH WEDGE LOCK FOR 89109 87457 PINS, FOR 87456 BW10147 CONTACT SOCKET SIZE-16, 13 AMP, PIN...
  • Page 158 13822 Oaks Avenue C50SS-V21 Chino, CA 91710 reedpumps.com PARTS 1-(909) 287 - 2100 ID # PART # PART DESCRIPTION QUANTITY 89314 PLUG, APEX 150 SERIES, 24 CAVITY ID # PART # PART DESCRIPTION QUANTITY 88935 3 EAY PLUG DT SER...
  • Page 159 13822 Oaks Avenue C50SS-V21 Chino, CA 91710 reedpumps.com PARTS 1-(909) 287 - 2100 ID # PART # PART DESCRIPTION QUANTITY 89316 PLUG. HDSCS SERIES, 4 CAVITY GRAY 89316-3 BACKSHELL, 89315, 89316 ID # PART # PART DESCRIPTION QUANTITY 89315 PLUG. HDSCS SERIES, 4 CAVITY BLK...
  • Page 160 13822 Oaks Avenue C50SS-V21 Chino, CA 91710 reedpumps.com PARTS 1-(909) 287 - 2100 ID # PART # PART DESCRIPTION QUANTITY 89102 DEUTSCH DT06 PLUG, 2X2 89132 WEDGE,DEUTSCH FOR 89102 89102-B BOOT FOR 89102, 4 CAVITY SOCKET ID # PART #...
  • Page 161 13822 Oaks Avenue C50SS-V21 Chino, CA 91710 reedpumps.com PARTS 1-(909) 287 - 2100 ID # PART # PART DESCRIPTION QUANTITY 89319 RECEPTICAL, METRIPAK 150 SERIES, 6 CAVITY 89319-3 WEDGE LOCK, METRIPAK 150 CAV, FOR 89319 ID # PART # PART DESCRIPTION...
  • Page 162 13822 Oaks Avenue C50SS-V21 Chino, CA 91710 reedpumps.com PARTS 1-(909) 287 - 2100 ID # PART # PART DESCRIPTION QUANTITY 89321 PLUG, AMP SERIES, 4 CAVITY 89321-3 COVER FOR 89321 ID # PART # PART DESCRIPTION QUANTITY 89322 PLUG, BOSCH, 2 CAVITY...
  • Page 163 13822 Oaks Avenue C50SS-V21 Chino, CA 91710 reedpumps.com PARTS 1-(909) 287 - 2100 ID # PART # PART DESCRIPTION QUANTITY 89323 PLUG, METIPAK 150.2 SERIES, 2 CAVITY 89323-1 TERMINAL, 150 SERIES, 16-18 AWG FOR 89323 ID # PART # PART DESCRIPTION...
  • Page 164 13822 Oaks Avenue C50SS-V21 Chino, CA 91710 reedpumps.com PARTS 1-(909) 287 - 2100 ID # PART # PART DESCRIPTION QUANTITY 87456 PLUG SOCKET CONNECTOR, 8PIN ID # PART # PART DESCRIPTION QUANTITY 89217 DEUTSCH HD34 RECP, 8 PIN 88479 NUT FOR 88478 RECEPTICAL...
  • Page 165 13822 Oaks Avenue C50SS-V21 Chino, CA 91710 reedpumps.com PARTS 1-(909) 287 - 2100 ID # PART # PART DESCRIPTION QUANTITY 89277 DEUTSH DT706 PLUG, 2 CAVITY 89277-A WEDGE FOR 89277 ID # PART # PART DESCRIPTION QUANTITY 88733-1 FUSE HOLDER INLINE, BLADE STYLE, 30AMP...

  • Page 166: Plc Controls

    13822 Oaks Avenue C50SS-V21 Chino, CA 91710 reedpumps.com PARTS 1-(909) 287 - 2100 PLC CONTROLS C-SERIES CONTROL PANEL ASSEMBLY ID # PART # PART DESCRIPTION QUANTITY 89334-T4 C-SERIES CONTROL PANEL ASSY. 89090 EMERGENCY STOP PUSH BUTTON HEAVY DUTY 89090-L ILLUMINATED E-STOP RING...

  • Page 167: Key Pad Switches Insert Kit

    13822 Oaks Avenue C50SS-V21 Chino, CA 91710 reedpumps.com PARTS 1-(909) 287 - 2100 KEY PAD SWITCHES INSERT KIT ID # PART # PART DESCRIPTION QUANTITY 89412-BC INSERT KIT FOR PLC SWITCH FUNCTIONS INSERT,REMOTE ICON CLEAR 89412-2L INSERT,PRESSURE A/B ICON CLEAR...

  • Page 168: Key Pad Switches Insert Kit Cont

    13822 Oaks Avenue C50SS-V21 Chino, CA 91710 reedpumps.com PARTS 1-(909) 287 - 2100 KEY PAD SWITCHES INSERT KIT CONT. ID # PART # PART DESCRIPTION QUANTITY 89412-BC INSERT KIT FOR PLC SWITCH FUNCTIONS INSERT, THROTTLE GAIN ICON CLEAR 89412-9S INSERT, TROTTLE DROP ICON CLEAR...

  • Page 169: Mvec/Fuse/Relay

    13822 Oaks Avenue C50SS-V21 Chino, CA 91710 reedpumps.com PARTS 1-(909) 287 - 2100 MVEC/FUSE/RELAY MVEC 3 MVEC 1 MVEC 2 ID # PART # PART DESCRIPTION QUANTITY MVEC, 12 RELAY, BUSSMAN 88980 AUTOMOTIVE MINITURE BLADE FUSE 10AMP 88953 MVEC,RELAY,12V 89128...
  • Page 170 13822 Oaks Avenue C50SS-V21 Chino, CA 91710 reedpumps.com PARTS 1-(909) 287 - 2100 MVEC/FUSE/RELAY BUSS#3 (R1,R4) BUSS#1 HORN (R2,R5) (R7) VIB (R8) HORN (R3) VIB (R6) 89128 63 of 90 C50SS-V21...
  • Page 171 13822 Oaks Avenue C50SS-V21 Chino, CA 91710 reedpumps.com PARTS 1-(909) 287 - 2100 EXPANSION MODULE PARKER IQAN-XC10 ID # PART # PART DESCRIPTION QUANTITY 88919 XC10, PARKER EXPANTION MODULE 88945 AMP, 35 POS SEAL PLUG, BLACK (C1) 88946 AMP, 35 POS SEAL PLUG, WHITE (C2)

  • Page 172: Md3 Display Module

    13822 Oaks Avenue C50SS-V21 Chino, CA 91710 reedpumps.com PARTS 1-(909) 287 - 2100 MD3 DISPLAY MODULE FRONT BACK ID # PART # PART DESCRIPTION QUANTITY 88918 MD3,PARKER DISPLAY 88653 PLUG DTM 12 WAY A KEY, GREY (C1) 88653-2 WEDGELOCK DTM 12 WAY PLUG (C1) 88959 CONTACT SOCKET SIZE 20 (7.5 AMP) (C1)

  • Page 173: Estop, Key Assembly, Plugs

    13822 Oaks Avenue C50SS-V21 Chino, CA 91710 reedpumps.com PARTS 1-(909) 287 - 2100 ESTOP, KEY ASSEMBLY, PLUGS ESTOP ASSEMBLY KEY ASSEMBLY ID # PART # PART DESCRIPTION QUANTITY 89090 EMERGENCY STOP BUTTON HEAVY DUTY 89090-L ILLUMINATED E-STOP RING 89004 KEY SWITCH SEALED...

  • Page 174: Busses, Connectors, Pins

    13822 Oaks Avenue C50SS-V21 Chino, CA 91710 reedpumps.com PARTS 1-(909) 287 - 2100 BUSSES, CONNECTORS, PINS BUSS-2 BUSS-7 BUSS-16 BUSS-1 BUSS- BUSS- BUSS-10 BUSS-11 BUSS-12 BUSS-13 BUSS-3 BUSS-4 BUSS-5 BUSS-8 ID # PART # PART DESCRIPTION QUANTITY 89180 DEUTSCH DT04 BUS, 1X8 (SOLID)

  • Page 175: Serial Plate, Remote Plug

    13822 Oaks Avenue C50SS-V21 Chino, CA 91710 reedpumps.com PARTS 1-(909) 287 - 2100 SERIAL PLATE, REMOTE PLUG Serial Plate Tier version Identification Panel serial # Display serial # Pump type Expansion module serial # PLC program Fuse/Relay box serial #...

  • Page 176: Buss Bar Set-Up

    13822 Oaks Avenue C50SS-V21 Chino, CA 91710 reedpumps.com PARTS 1-(909) 287 - 2100 BUSS BAR SET-UP 69 of 90 C50SS-V21...

  • Page 177: Can Push Button Switch Plug

    13822 Oaks Avenue C50SS-V21 Chino, CA 91710 reedpumps.com PARTS 1-(909) 287 - 2100 CAN PUSH BUTTON SWITCH PLUG SWITCH A CAN SWITCH A ID # PART # PART DESCRIPTION QUANTITY 89102 DEUTSCH DT04 PLUG, 2X2 89132 DEUTSCH WEDGE LOCK FOR 89102...

  • Page 178: Can Push Button Switch Plug

    13822 Oaks Avenue C50SS-V21 Chino, CA 91710 reedpumps.com PARTS 1-(909) 287 - 2100 CAN PUSH BUTTON SWITCH PLUG SWITCH B CAN SWITCH B ID # PART # PART DESCRIPTION QUANTITY 89102 DEUTSCH DT04 PLUG, 2X2 DEUTSCH WEDGE LOCK 89132 FOR 89102...

  • Page 179: Can Plugs, Connectors

    13822 Oaks Avenue C50SS-V21 Chino, CA 91710 reedpumps.com PARTS 1-(909) 287 - 2100 CAN PLUGS, CONNECTORS GREEN BLUE BLUE NOTE* GREEN-CIRCLE BLUE-TRIANGLE BLUE ENGINE CAN J1939 ID # PART # PART DESCRIPTION QUANTITY 88934 3 WAY T RECEPTICAL, DT SER.

  • Page 180: Deutsch 128 Plug Assembly

    13822 Oaks Avenue C50SS-V21 Chino, CA 91710 reedpumps.com PARTS 1-(909) 287 - 2100 DEUTSCH 128 PLUG ASSEMBLY CONTROL HARNESS SIDE ENGINE HARNESS SIDE 73 of 90 C50SS-V21...
  • Page 181 13822 Oaks Avenue C50SS-V21 Chino, CA 91710 reedpumps.com PARTS 1-(909) 287 - 2100 DEUTSCH 128 PLUG ASSEMBLY CONT. PLUG ASSEMBLY ID # PART # PART DESCRIPTION QUANTITY 89109 DEUTSCH RECEPTACLE 128 CONTACT, PIN 89159 DEUTSCH WEDGE LOCK FOR 89157 88958...

  • Page 182: Wire Harness Main Layout

    13822 Oaks Avenue C50SS-V21 Chino, CA 91710 reedpumps.com PARTS 1-(909) 287 - 2100 WIRE HARNESS MAIN LAYOUT 75 of 90 C50SS-V21...

  • Page 183: Wire Harness Door Layout

    13822 Oaks Avenue C50SS-V21 Chino, CA 91710 reedpumps.com PARTS 1-(909) 287 - 2100 WIRE HARNESS DOOR LAYOUT 76 of 90 C50SS-V21...

  • Page 184: Frame Installation

    13822 Oaks Avenue C50SS-V21 Chino, CA 91710 reedpumps.com PARTS 1-(909) 287 - 2100 FRAME INSTALLATION FRAME, TIRES, JACK, AND TOW EYE ID # PART # PART DESCRIPTION QUANTITY 89283 FRAME ASSY C SER/CUMMINS TIER-4 89282 FRAME WELDMENT C-SER /CUMMINS TIER-4 85423 TIRE &...

  • Page 185: 7000Lb Axle Mounting Assembly Front

    13822 Oaks Avenue C50SS-V21 Chino, CA 91710 reedpumps.com PARTS 1-(909) 287 - 2100 7000LB AXLE MOUNTING ASSEMBLY FRONT FRONT AXLE MOUNT ID # PART # PART DESCRIPTION QUANTITY AXLE MOUNTING HARDWARE KIT ½” -20 X 3.5 HHCS GR8 ½” SAE WASHER ½”...

  • Page 186: 7000Lb Axle Mounting Assembly Rear

    13822 Oaks Avenue C50SS-V21 Chino, CA 91710 reedpumps.com PARTS 1-(909) 287 - 2100 7000LB AXLE MOUNTING ASSEMBLY REAR REAR AXLE MOUNT ID # PART # PART DESCRIPTION QUANTITY AXLE MOUNTING HARDWARE KIT ½” SAE WASHER ½” USE WASHER ½” – 20 LOCK NUT ½”...

  • Page 187: Hood And Covers

    13822 Oaks Avenue C50SS-V21 Chino, CA 91710 reedpumps.com PARTS 1-(909) 287 - 2100 HOOD AND COVERS BOTTOM FLUSH BOX ASSEMBLY ID # PART # PART DESCRIPTION QUANTITY 89196 COVER TOP, C SER CUMMINS T4 PAINTED 87592 COVER FRONT AIR INTAKE, PAINTED...

  • Page 188: Gauges

    13822 Oaks Avenue C50SS-V21 Chino, CA 91710 reedpumps.com PARTS 1-(909) 287 - 2100 GAUGES ID # PART # PART DESCRIPTION QUANTITY 70366 PRESSURE GAUGE 3000 PSI/BAR 74562 PRESSURE GAUGE 6000 PSI/BAR 803218 ADAPTER GAUGE, ¼ FPT-M16X2 MALE 87727 PRESSURE GAUGE 600 PSI 802842 MINICHECK HOSE, 48”...

  • Page 189: Hydraulic Outrigger Group

    13822 Oaks Avenue C50SS-V21 Chino, CA 91710 reedpumps.com PARTS 1-(909) 287 - 2100 HYDRAULIC OUTRIGGER GROUP ID # PART # PART DESCRIPTION QUANTITY 88041-AO1 AGITR-OUTRIGGER ASSY (REMOTE) 86574 HYD CYL – 2.00 BORE X 12.00 STR – PAINTED 85659-010 HOSE, 4M2T-6FJX-6FJX-33.00 86746 FITTING, 90°...

  • Page 190: Electric Hydraulic Outrigger

    13822 Oaks Avenue C50SS-V21 Chino, CA 91710 reedpumps.com PARTS 1-(909) 287 - 2100 ELECTRIC HYDRAULIC OUTRIGGER DOWN LEFT LEFT DOWN RIGHT RIGHT ID # PART # PART DESCRIPTION QUANTITY 88041-AO1 HYD OUTRIGGER ASSEMBLY, REMOTE 85659-010 HOSE, 4M2T-6FX-6JX-33.00 87540 CABLE SOLENIOD VALVE, WITH DIN PLUG...

  • Page 191: Electric Hydraulic Outrigger Controls

    13822 Oaks Avenue C50SS-V21 Chino, CA 91710 reedpumps.com PARTS 1-(909) 287 - 2100 ELECTRIC HYDRAULIC OUTRIGGER CONTROLS EACH SIDE 3/8-16X1” BOLT 3/8 FLAT WASHER 3/8 LOCKNUT EACH SIDE EACH SIDE EACH SIDE EACH SIDE ID # PART # PART DESCRIPTION...

  • Page 192: Agitator Group

    13822 Oaks Avenue C50SS-V21 Chino, CA 91710 reedpumps.com PARTS 1-(909) 287 - 2100 AGITATOR GROUP ID # PART # PART DESCRIPTION QUANTITY 88026 VALVE, 3SPOOL,12 VDC SPOOL 85657-016 HOSE, 8M2T-10FJX-10FJX45-20.00 85658-011 HOSE, 6M2T-6FJX-6FJX-21.00 85658-010 HOSE, 6M2T-6FJX-6FJX-20.00 FITTING,MB-MJ-10-6 85 of 90...
  • Page 193 13822 Oaks Avenue C50SS-V21 Chino, CA 91710 reedpumps.com PARTS 1-(909) 287 - 2100 AGITATOR GROUP CONTINUED X2 EACH SIDE ID # PART # PART DESCRIPTION QUANTITY 89455 HYD MOTOR, 48 CID, 1” SHAFT 85846 DECAL, AGITATOR 800919 DECAL, WARNING, STAND CLEAR 85658-011 HOSE, 6M2T-6FJX-6FJX-21.00...

  • Page 194: Available Options

    13822 Oaks Avenue C50SS-V21 Chino, CA 91710 reedpumps.com PARTS 1-(909) 287 - 2100 AVAILABLE OPTIONS OUTRIGGER GROUP HYD OUTRIGGER OUTRIGGER/AGITATOR ELECTRIC OUTRIGGER AGITATOR GROUP STD/PADDLE OPTION/PADDLE HYD/AGITATOR/SINGLE HYD/AGITATOR/TRIPLE RADIO REMOTE WIRLESS REMOTE 50’ CABLE REMOTE PNUT W/STROKE SYSTEM COUNTER LIFTING KIT...
  • Page 195 13822 Oaks Avenue C50SS-V21 Chino, CA 91710 reedpumps.com PARTS 1-(909) 287 - 2100 CARBIDE WEAR PARTS WEAR RING/CARBIDE WEAR PLATE/CARBIDE REMOTE CONTROL, CABLE KARTECH PLC 50FT WATER PUMP ASSY VIBRATOR KIT OLI KIT 88 of 90 C50SS-V21...
  • Page 196 13822 Oaks Avenue C50SSCR Chino, CA 91710 reedpumps.com PARTS (909) 287 - 2100 E-STOP PLC KIT TIRE & WHEEL CHROME AUTO LUBE STEEL TUBING 12 PORT PLASTIC TUBING 12 PORT MANUAL LUBE BLOCK 89 of 90 C50SS-V21...
  • Page 197 13822 Oaks Avenue C50SSCR Chino, CA 91710 reedpumps.com PARTS (909) 287 - 2100 SURGE BRAKE ASSY 9000LB 2"BALL 3”PINTLE HITCH BALL 2" 2 5/16" 90 of 90 C50SS-V21...

Table of Contents