1. Manuals
  2. Brands
  3. REED Manuals
  4. Industrial Equipment
  5. B50HP
  6. Technical manual

REED B50HP Technical Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
B50HP TECHNICAL MANUALS
Operations, Maintenance, Schematics, Parts, Safety
OPERATIONS/
MAINTENANCE
Introduction
Warranty
Safety
Operation
Main Controls
Priming
Pumping
Clean-up
Maintenance
Check-List
Rev * REED LLC 2020
SCHEMATICS/
PARTS LISTS
Pumping Train Group
Power Train Group
Main Hydraulic Pump
Tanks
Hydraulic Manifolds
Accumulator
Electrical Group
PCL Controls
Frame Installation
Available Options
SAFTEY MANUAL
AMERICAN CONCRETE
PUMPING ASSOCIATION
Introduction
General Safety
Rules
Appendix

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the B50HP and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for REED B50HP

Summary of Contents for REED B50HP

  • Page 1 Pumping Train Group Warranty Power Train Group Safety Main Hydraulic Pump Operation Tanks Main Controls Hydraulic Manifolds Priming Accumulator Introduction Pumping Electrical Group General Safety Clean-up PCL Controls Rules Maintenance Frame Installation Appendix Check-List Available Options Rev * REED LLC 2020...

  • Page 2: Table Of Contents

    www.reedpumps.com OPERATION and MAINTENANCE (909)287-2100 INTRODUCTION ......................2 WARRANTY ........................2 WARRANTY CLAIM FORM ........................4 SAFETY .......................... 5 SAFETY ALERT SYMBOLS AND SIGNAL WORDS................. 5 LOCKOUT / TAGOUT ..........................6 GENERAL SAFETY GUIDELINES ......................7 SAFETY DECALS ............................. 8 OPERATION .........................

  • Page 3: Introduction

    All safety guidelines, product descriptions, illustrations, and specifications found throughout this manual were in effect at the time the manual was released for printing. It should be noted; REED RESERVES THE RIGHT TO MAKE CHANGES IN DESIGN OR TO MAKE ADDITIONS TO OR IMPROVEMENTS IN THE PRODUCT WITHOUT IMPOSING ANY OBLIGATIONS UPON ITSELF TO INSTALL THEM ON PRODUCTS PREVIOUSLY MANUFACTURED.

  • Page 4: Warranty

    OPERATION and MAINTENANCE (909)287-2100 WARRANTY REED warrants each new Concrete equipment A,B, and C Series to be free of defects in material and workmanship under normal use and service for a period as follows: CONCRETE PUMP • 1 year or 1200 operating hours, whichever occurs first •...

  • Page 5: Warranty Claim Form

    Failure Date: Repair Date: Do not send part(s) until requested by REED or until claim is approved. All parts requested to be returned must have a Return Authorization Number provided by REED and shipping freight prepaid. Parts must ship within 30 days from REED request.

  • Page 6: Safety

    www.reedpumps.com OPERATION and MAINTENANCE (909)287-2100 SAFETY Everyone involved with the operation, maintenance, inspection, and repair of the concrete pump MUST READ and UNDERSTAND this manual and the accompanying Safety Manual. SAFETY ALERT SYMBOLS AND SIGNAL WORDS The following safety alert symbols, signals, and explanations are intended to warn the operator of hazardous and potentially hazardous situations.

  • Page 7: Lockout / Tagout

    OPERATION and MAINTENANCE (909)287-2100 LOCKOUT / TAGOUT The Lockout/Tagout procedure applies to all REED concrete placing equipment. Before performing any maintenance and/or repair on equipment; 1. Remove keys lock-out signage must be posted to indicate machine is currently under Lockout/Tagout.

  • Page 8: General Safety Guidelines

    Only Operate, Maintain, Inspect, and Repair In Accordance with This Operation Manual and the Safety Manual Performance and Safety Features Must Never Be Altered, Disconnected, or Removed Contact REED Technical Support and Service When Assistance Is Required Rev * 7 of 54...

  • Page 9: Safety Decals

    Association (CPMA) for your protection. They are placed at appropriate areas on the concrete pump to be constant warnings of dangers. Know and adhere to the information they provide. Contact REED Customer Service for complimentary replacements of safety decals, shipping charges may apply.
  • Page 10 www.reedpumps.com OPERATION and MAINTENANCE (909)287-2100 DO NOT OPERATE MACHINE WITHOUT ALL GRATES IN PLACE Rev * 9 of 54...
  • Page 11 www.reedpumps.com OPERATION and MAINTENANCE (909)287-2100 Rev * 10 of 54...
  • Page 12 www.reedpumps.com OPERATION and MAINTENANCE (909)287-2100 Rev * 11 of 54...
  • Page 13 www.reedpumps.com OPERATION and MAINTENANCE (909)287-2100 DECALS PLACED NEAR HOPPER GRATE AREA Rev * 12 of 54...
  • Page 14 www.reedpumps.com OPERATION and MAINTENANCE (909)287-2100 Rev * 13 of 54...
  • Page 15 www.reedpumps.com OPERATION and MAINTENANCE (909)287-2100 DECALS PLACED NEAR WATERBOX AREA DECALS PLACED NEAR OUTRIGGER CONTROL AREA Rev * 14 of 54...
  • Page 16 www.reedpumps.com OPERATION and MAINTENANCE (909)287-2100 DECALS PLACED ON SIDE PANEL AREA Rev * 15 of 54...
  • Page 17 www.reedpumps.com OPERATION and MAINTENANCE (909)287-2100 Rev * 16 of 54...
  • Page 18 www.reedpumps.com OPERATION and MAINTENANCE (909)287-2100 Rev * 17 of 54...

  • Page 19: Operation

    www.reedpumps.com OPERATION and MAINTENANCE (909)287-2100 OPERATION OPERATOR QUALIFICATIONS Everyone involved with the operation, maintenance, inspection, and repair of the concrete pump MUST READ and UNDERSTAND this operation manual and the accompanying Safety Manual. The following are a few general warnings for operator qualifications outlined in the Safety Manual.

  • Page 20: Serial Plate Idenification

    www.reedpumps.com OPERATION and MAINTENANCE (909)287-2100 SERIAL PLATE IDENIFICATION A-SERIES B-SERIES C-SERIES Rev * 19 of 54...

  • Page 21: Main Panel Serial Idenification

    www.reedpumps.com OPERATION and MAINTENANCE (909)287-2100 MAIN PANEL SERIAL IDENIFICATION Rev * 20 of 54...

  • Page 22: Product Description

    www.reedpumps.com OPERATION and MAINTENANCE (909)287-2100 PRODUCT DESCRIPTION The operation of the concrete equipment encompasses the use of hydraulic and electrical systems. This Concrete Pump is designed to safely mix wet concrete or material within its published ratings and specifications. Stability of the concrete pump during operation is provided by the ( ) outrigger legs and the front jack that can be raised or lowered from the concrete pump, to accommodate terrain.

  • Page 23: Controls

    www.reedpumps.com OPERATION and MAINTENANCE (909)287-2100 CONTROLS PLC MAIN CONTROLS B, C-SERIES EMERGENCY STOP This push/pull emergency switch is used to shut down the pump in an emergency by disabling the hydraulic systems. It does not shut the engine or motor off. Depress PUSH knob in to STOP operation. PULL knob out to REACTIVATE system.
  • Page 24 www.reedpumps.com OPERATION and MAINTENANCE (909)287-2100 PLC MAIN CONTROLS B,C-SERIES MAIN POWER KEY MAIN DIGITAL DISPLAY this is a three (3) this is where all position key switch. Turnkey to the ON position the pumping statues are displayed. to power control box. Shut down power by turning key to OFF position.
  • Page 25 www.reedpumps.com OPERATION and MAINTENANCE (909)287-2100 Rev * 24 of 54...
  • Page 26 www.reedpumps.com OPERATION and MAINTENANCE (909)287-2100 Rev * 25 of 54...
  • Page 27 www.reedpumps.com OPERATION and MAINTENANCE (909)287-2100 Rev * 26 of 54...
  • Page 28 www.reedpumps.com OPERATION and MAINTENANCE (909)287-2100 Rev * 27 of 54...
  • Page 29 www.reedpumps.com OPERATION and MAINTENANCE (909)287-2100 Rev * 28 of 54...
  • Page 30 www.reedpumps.com OPERATION and MAINTENANCE (909)287-2100 Rev * 29 of 54...
  • Page 31 www.reedpumps.com OPERATION and MAINTENANCE (909)287-2100 Rev * 30 of 54...
  • Page 32 www.reedpumps.com OPERATION and MAINTENANCE (909)287-2100 GAUGES PUMP or DRIVE CYLINDER GAUGE indicates the hydraulic pressure requirement of the pumping cylinders to push material. Gauge reading varies depending upon many circumstances such as: material slump, material line type, size and length, vertical, uphill, downhill or horizontal placement, pumping speed, etc.

  • Page 33: Jobsite Set-Up

    www.reedpumps.com OPERATION and MAINTENANCE (909)287-2100 JOBSITE SET-UP Refer to the Safety Manual for set-up safety precautions not limited to the following guidelines: Ensure Machine Can Be Safely Operated in Set-Up Location Away from Hazards and Dangers Away from Slopes and Excavations Position Machine on As Solid and Level Ground As Possible Adjust height of Machine and remove Leg pins Secure Machine Positions with Leg Pins and Locks...

  • Page 34: Preparing For System Start-Up

    www.reedpumps.com OPERATION and MAINTENANCE (909)287-2100 PREPARING FOR SYSTEM START-UP Everyone involved with the operation, maintenance, inspection, and repair of the concrete pump MUST READ and UNDERSTANDS this manual and the Safety Manual. Refer to the Safety Manual for pumping and blockages safety precautions not limited to the following guidelines: Perform Required Inspection, Lubrication, and Maintenance Before, During, and After Pumping Operations...

  • Page 35: Operation Of Controls

    www.reedpumps.com OPERATION and MAINTENANCE (909)287-2100 OPERATION OF CONTROLS THE HOPPER GRATE MUST BE CLOSED (There is a safety interlock that guards against the opening of the mixer grate. SYSTEM START-UP Turn Pump ON Only When Hopper Is Full of Concrete Ensure the following conditions are met before activating pump: o PUMP Switch Is “OFF”...

  • Page 36: Recommended Maintenance Practices

    Engine Manufacturer Maintenance Schedule Must Be Followed Read Engine Manufacturer Manual REED has provided only general guidelines regarding engine maintenance and will not cover engine warranty claims. Rev * 35 of 54...
  • Page 37 www.reedpumps.com OPERATION and MAINTENANCE (909)287-2100 MAINTENANCE Hydraulic Pressure in All Systems Must Be ZERO Before and During Any Maintenance Procedures Engine Must Be Turned OFF and Lockout / Tagout Procedures Must Be Followed Before and During Any Maintenance Procedures Rev * 36 of 54...

  • Page 38: General Maintenance Areas

    www.reedpumps.com OPERATION and MAINTENANCE (909)287-2100 GENERAL MAINTENANCE AREAS Perform scheduled inspections to identify and detect any potential problems. The list presented should be inspected and checked on a regular basis and is a recommended minimum. MAIN CONTROLS • Control box in good condition, sealed, not damaged •...

  • Page 39: Lubrication

    www.reedpumps.com OPERATION and MAINTENANCE (909)287-2100 LUBRICATION Rapid wear and possible shutdown will result if the unit is operated with inadequate lubrication. Follow the recommendations stated herein, and if needed increase the application of lubricants above these recommendations when the equipment is subject to heavy usage.
  • Page 40 www.reedpumps.com OPERATION and MAINTENANCE (909)287-2100 LUBRICATION POINTS The following graphics are for REFERENCE ONLY. IF EQUIPPED WITH DUAL (2) HYDRAULIC SHIFT CYLINDERS, RELIEVE SHIFT CIRCUIT HYDRAULIC PRESSURE TO PROPERLY GREASE HYDRAULIC SHIFT CYLINDERS AND BELL CRANK LUBRICATION POINTS Rev * 39 of 54...
  • Page 41 www.reedpumps.com OPERATION and MAINTENANCE (909)287-2100 LUBRICATION POINTS S-TUBE OUTLET GREASE POINTS AGITATOR GREASE POINTS HYDRAULIC MOTOR SIDE GREASE POINTS BEARING SIDE GREASE POINTS Rev * 40 of 54...
  • Page 42 www.reedpumps.com OPERATION and MAINTENANCE (909)287-2100 HYDRAULIC SYSTEM Hydraulic pumps are used to supply the flow of oil necessary to operate actuators of the concrete pump. Contamination of the Oil Is the Leading Contributor to System Malfunctions Extreme care must be exercised to prevent contaminants from entering the system. Always cap or plug open ports and hydraulic lines.
  • Page 43 www.reedpumps.com OPERATION and MAINTENANCE (909)287-2100 HYDRAULIC SYSTEM MAINTENANCE ITEM DESCRIPTIONS FLUID Check fluid level and oil clarity daily with sight gauge provided. Maintain level at full mark. Add hydraulic oil through the return filter fill port when necessary. TANK BREATHER Clean every 50 hours of operation.
  • Page 44 www.reedpumps.com OPERATION and MAINTENANCE (909)287-2100 ADDING HYDRAULIC FLUID There are a few common methods for filling the hydraulic tank as described below. Exercise extreme care when adding fluid to the hydraulic tank to avoid contamination. • To prevent any dirt or water from entering the hydraulic tank, thoroughly clean area around the return filter fill port plug, the vented fill cap or the inspection cover.
  • Page 45 www.reedpumps.com OPERATION and MAINTENANCE (909)287-2100 FILL PORT FILTER ELEMENT GASKET RETURN FILTER Do Not Use Cloth for Straining Fluid Lint Is a Contaminant Harmful to the Hydraulic System FILTER ELEMENT O-RING Rev * 44 of 54...
  • Page 46 www.reedpumps.com OPERATION and MAINTENANCE (909)287-2100 To change the filter elements: 1. Shut off machine. 2. VERIFY PRESSURES IN ALL CIRCUITS READ ZERO! 3. Wipe clean any dirt and grime from area surrounding filter housing 4. Loosen the filter cover plate bolts 5.

  • Page 47: Component Replacement

    COMPONENT REPLACEMENT When parts are worn, do not delay in replacement. Continued usage with worn parts may lead to damage of other components. Please contact the REED Service Department or your local dealer for technical support. Rev * 46 of 54...

  • Page 48: Pump Maintenance Schedule And Checklists

    www.reedpumps.com OPERATION and MAINTENANCE (909)287-2100 PUMP MAINTENANCE SCHEDULE AND CHECKLISTS Providing a maintenance schedule defined specifically by run hours or yardage pumped serves only as a general guideline given the large amount of variables a unit might be subject to, such as weather and ambient temperature conditions, jobsite conditions, material differences of mix design, the load burden the unit is typically subject to, i.e.
  • Page 49 www.reedpumps.com OPERATION and MAINTENANCE (909)287-2100 INITIAL 50 HOUR MAINTENANCE CHECKLIST Actual Hours Date # Maintenance Description Initials Change engine oil and filters (see engine manufacturer maintenance schedule for additional requirements) IF REQUIRED Additional Notes: Change hydraulic oil filters Inspect hydraulic hoses and fittings for any signs of external wear or damage Additional Notes: Rev * 48 of 54...
  • Page 50 www.reedpumps.com OPERATION and MAINTENANCE (909)287-2100 EVERY 100 HOUR MAINTENANCE CHECKLIST Actual Hours Date Maintenance Description Initials Clean hydraulic tank breather Inspect all structural components (check frame, hopper, and other structural members for any damage) Additional Notes: Additional Notes: Check coolers and radiators for dirt or debris. Clean as necessary Check condition of engine drive belts.
  • Page 51 www.reedpumps.com OPERATION and MAINTENANCE (909)287-2100 EVERY 250 HOUR MAINTENANCE CHECKLIST Actual Hours Date # Maintenance Description Initials Change hydraulic filters (or change more frequently as indicated by indicator gauge on filter) Additional Notes: Check that all electrical wires, cables, terminals, plugs are in good condition Additional Notes: Change engine oil and filters (see engine manufacturer guide for all engine requirements) IF REQUIRED...
  • Page 52 www.reedpumps.com OPERATION and MAINTENANCE (909)287-2100 EVERY 250 HOUR MAINTENANCE CHECKLIST Actual Hours Date Maintenance Description Initials Control console in good condition Switch in good condition Additional Notes: Rev * 51 of 54...
  • Page 53 www.reedpumps.com OPERATION and MAINTENANCE (909)287-2100 EVERY 500 HOUR MAINTENANCE CHECKLIST Actual Hours Date Maintenance Description Initials Inspect hydraulic hoses and fittings for any signs of external wear or damage Additional Notes: Inspect all wear parts and change as necessary (excessive wear may cause inefficient performance and/or shutdown of operation) Additional Notes: Change hydraulic fluid, clean the reservoir and the suction strainers within...
  • Page 54 www.reedpumps.com OPERATION and MAINTENANCE (909)287-2100 EVERY 500 HOUR MAINTENANCE CHECKLIST Actual Hours Date ADDITIONAL GENERAL NOTES: Rev * 53 of 54...

  • Page 55: Notes

    www.reedpumps.com OPERATION and MAINTENANCE (909)287-2100 NOTES Rev * 54 of 54...
  • Page 56 89334-T4 C-SERIES CONTROL PANEL 89113 PCL WIRING HARNESS SCHEMATIC...
  • Page 57 89105 89106 GROUND BUSSES BW10147 CUT ALL WIRES 4FT 18 AWG TXL 89104 #121 #121 #126 #128 #109 #111 BUSS#13 #112 BUSS#17 128 PLUG BUSS#17 BUSS#17 BUSS#17 87807 ATS-A #122 #122 128 PLUG #125 BUSS#4 88958 BUSS#12 8/26/2020 REV-Q...
  • Page 58 89105 89106 GROUND BUSSES BW10147 CUT ALL WIRES 4FT 18 AWG TXL 89104 #123 #123 BUSS#11 128 PLUG 87807 #124 W/ GND WIRE ROM B10 #124 W/ GND WIRE FROM B11 128 PLUG MVEC 88958 E-STOP BUSS#10 XC10-C1#14 XC10-C1#15 XC10-C1#16 XC10-C1#17 XC10-C2#29 8/26/2020...
  • Page 59 88542-1 89181 BUSS #1 BW10147 89179 BUSS BUSS#4-#10 BW10147 MVEC#1-#1A MVEC#1-#1B BUSS#1 MVEC#1-2 BUSS#8-#12 88960-1S 89110-6 89181 BUSS#8-#9 128 PLUG 88958 8/26/2020 REV-Q...
  • Page 60 BUSS #2 88542-1 89180 BW10147 CUT WIRE 4 @ 4’ 89179 REMAINING 4 WIRES @ 6 FT 18 AWG RED TXL WIRE BUSS KEY SWITCH # 4 BW10147 BUSS#2 MD3-C1 88959 #106 MD3-C1#12 89180 MVEC#3-#8 MVEC#3-#1 MVEC#3 89112-2 89112-3 8/26/2020 REV-Q...
  • Page 61 89105 BUSS #3 89106 BW10147 89104 XC10 88945-S BUSS#17-12 XC10-C1-2 XC10 C1-5 XC10-C1-11 BUSS XC10 C1-22 MVEC#1-1C BW10147 BUSS#3 BUSS#17-1 BUSS#15-1 XC10 C1-6 XC10 C1-4 XC10 C1-3 MVEC#1-1D MVEC 88960 89110-6 GRN 8/26/2020 REV-Q...
  • Page 62 89105 89103 BUSS #4 BUSS #5 BW10147 CUT ALL WIRES 4FT CAN HI/LO 89104 18 AWG TXL REMOTE #D BUSS#1 - 8 REMOTE #C CAN SWITCH #3 BUSS 12-9 BUSS#4 CANSWITCH #3 BUSS CAN SWITCH #4 BW10147 CAN SWITCH #4 REMOTE #B REMOTE MD3-C1-#2...
  • Page 63 BUSS #6 88542-1 89180 BW10147 89179 DEF#1-E MVEC#1-B BUSS#6 DEF MOD-E XC10 C2-30 89180 DEF#3-E 88960-1S DEF#2-G 89110-6 GRN 8/26/2020 REV-Q...
  • Page 64 88542-1 BUSS #7 89180 BW10147 89179 WIRES 1,2, & 3 CUT @4FT 18AWG RED TXL WIRE 88960 89110-6 GRN MVEC#2-A CUT 6 FT. 128 PLUG BUSS#7 88958 1K OHM MD3 C1-7 #118 8/26/2020 REV-Q...
  • Page 65 89105 89103 BUSS #8 BW10147 89104 CUT ALL WIRES EXCEPT PIN 11 TO 4FT 18 AWG RED TXL WIRE BUSS#1-4 SEE NOTE #119 BUSS#1-2 BUSS BW10147 BUSS#8 128 PLUG 88958 FOR PIN 11 T3: PIN TO TIER3 – 3 T4: PIN TO ATS - G 8/26/2020 REV-Q...
  • Page 66 BUSS #9 88542-1 89181 BW10147 MVEC#1-2 DEF RELAYS 89179 88960 89110-6 DEF MOD-D DEF 2-B MVEC 2-C BUSS#9 ATS-B XC10 C2-31 DEF#3-D DEF#1-D 128 PLUG 88958 8/26/2020 REV-Q...
  • Page 67 88542-1 89181 BUSS #14 BW10147 BUSS #15 PROX A/B BUSS 89179 BW10147 XC10 C1#18 XC10 C2#28 PROX (A) XC10 BUSS#14 88945-S 89181 *4WIRES WHITE @ 4FT 89136 *1 WIRE RED @4FT 128 PLUG *ALL WIRES 18 AWG TXL 89136 88958 XC10 C2-#17 PROX (B) 89136 BUSS#15...
  • Page 68 BUSS #16 88542-1 89180 BW10147 89179 128 PLUG 88958 BUSS#16 DEF#1-C DEF#2-A DEF#3-C #102 89180 8/26/2020 REV-Q...
  • Page 69 89105 PLUG #17 89104-C OPTION VOLUME BW10147 89104 XC10 88945-S BUSS#3-12 BUSS#12-3 BUSS BUSS#11-11 BUSS#11-6 BW10147 BUSS#17 XC10 C2-5 XC10 C2-4 BUSS#11-4 128 PLUG BUSS#3-6 88958 8/26/2020 REV-Q...
  • Page 70 89105 TIER 3 BW10147 89104 XC10 88945-S BUSS XC10-C2-30 89136 BW10147 XC10-C2-31 TIER 3 128 PLUG BUSS#8-11 88958 WIRES 1 & 6 @ 4 FT 18 AWG WHT TXL 8/26/2020 REV-Q...
  • Page 71 CAN/SWITCHES 88958 BW10147 BLK RED GRN YELL BUSS#5-4 YELL BUSS#5-1 BUSS#4-1 BUSS#4-4 89146 89102 BW10147 89132 88958 89209 8/26/2020 REV-Q...
  • Page 72 CAN/SWITCHES BUSS BW10147 BLK RED GRN YELL BUSS#5-5 YELL BUSS#5-2 BUSS#4-2 BUSS#4-5 89146 89102 BW10147 89132 88958 89209 8/26/2020 REV-Q...
  • Page 73 CAN/SWITCHES SPARE BUSS BUSS#5-6 BW10147 BUSS#5-3 BUSS#4-3 BUSS#4-6 YELL BUSS#5-5 BUSS#5-2 BUSS#4-2 BUSS#4-5 YELL 89102 89132 BW10147 89101 REV-Q 8/26/2020...
  • Page 74 CAN/SWITCHES SPARE 88935 BW10147 CAN-B 88937 88932 MVEC#3-6 YELL CAN-B MVEC#3-12 88935 88937 CUT WIRE 55” ENGINE CAN J1939 88935 BW10147 BW10147 88934 88936 MD3-C1-10 YELL CAN-B MD3-C1-3 88958 BW10147 CUT 32” CUT WIRE 32” 8/26/2020 REV-Q...
  • Page 75 88653 88653-2 88959 89136 XC10 BUSS#2-4 88945-S YELL YELL YELL YELL BUSS#5-7 BUSS#2-3 BUSS BW10147 10 11 12 XC10-C1-#34 (CAN-C) XC10 XC10-C1-#33 MD3 C1 MVEC TEE-A (CAN-B) MVEC-TEE MVEC TEE-B BW10147 BUSS#10 BUSS#5-10 8/26/2020 REV-Q...
  • Page 76 XC10 #107 89127 CAN-L MD3 CAN-H MD3 #49-E-STOP LIGHT BUSS#10-#6 BUSS#10-#5 4’ BUSS#10-#4 BLACK BUSS#10-#3 BUSS#14-#5 BUSS#3 BUSS#3 BUSS#3 BUSS#3 BUSS#3 CAN C #BUSS#3 #108 128 PLUG BUSS#3 BW10147 88958 7-RED WIRES 88945-S *ALL WIRES 4’ LONG 4-BLK WIRES *18 AWG TXL WIRE REV-Q 8/26/2020 9-WHITE WIRES...
  • Page 77 XC10 BUSS 9-3 BUSS 6-3 BUSS#10-7 BUSS#14-7 E-STOP CONTACT WHITE BUSS#15-#6 BUSS#17-#5 BUSS#17-#6 128 PLUG BW10147 88945-S 88958 1-BLK WIRE *ALL WIRES 4’ LONG 13- WHT WIRES *18 AWG TXL WIRE 8/26/2020 REV-Q...
  • Page 78 DEF RELAYS BUSS#9-#1 DEF 1 BUSS#9-#6 DEF 2 BUSS#16-1 BUSS#16-2 128 PLUG 88958 DEF 2 BW10147 DEF 1 BUSS#6-#1 BUSS#6-#8 89183 89128 CUT ALL WIRES 89110-6 4FT 18 AWG TXL 88960-1 for double wire 88960-1S for single wire 8/26/2020 REV-Q...
  • Page 79 DEF RELAYS BUSS#9-#2 DEF 3 BUSS#9-#4 BUSS#16-3 GND BUSS 128 PLUG 88958 BW10147 DEF 3 BUSS#8-#11 BUSS#6-#2 89183 89128 CUT ALL WIRES 89110-6 4FT 18 AWG TXL 88960-1 for double wire 88960-1S for single wire 8/26/2020 REV-Q...
  • Page 80 DEF RELAYS BUSS#9-#7 DEF MOD #103 CUT WIRES #2 KEY SWITCH 6FT 18 AWG TXL #101 128 PLUG 88958 BW10147 #100 CUT ALL WIRES 4FT 18 AWG TXL BUSS#6-#4 89183 89128 89110-6 88960-1 for double wire 88960-1S for single wire 8/26/2020 REV-Q...
  • Page 81 CUT WIRE 1 ½” LONG VOLUME RELAY OPTION (UP) RELAY BUSS#17-3 88958 BUSS#17-6 88958 89218-1 89218 BUSS#17-1 BUSS#17-7 VOLUME UP BUSS#17-2 89298 89183 89128 89110-6 88960 8/26/2020 REV-Q...
  • Page 82 CUT WIRE 1 ½” LONG VOLUME RELAY OPTION (DOWN) RELAY BUSS#17-4 88958 BUSS#17-5 88958 89218-1 89218 BUSS#17-12 BUSS#17-8 VOLUME DOWN BUSS#17-11 89298 89183 89128 89110-6 88960 8/26/2020 REV-Q...
  • Page 83 MVEC #1 BUSS#3-#1 BUSS#3-#7 BUSS#1-#6 BUSS#1-#7 128 PLUG 88958 MVEC 1 MVEC BW10147 128 PLUG 87807 CUT ALL WIRES 5FT 18 AWG TXL 89110-6 89110 88960 8/26/2020 REV-Q...
  • Page 84 MVEC #2 KEY SWITCH #1 BUSS#9-#4 (TIER 4) BUSS#6-#5 (TIER 4) BUSS#7-#8 128 PLUG 88958 MVEC 2 BW10147 89110-1 MVEC 128 PLUG 87807 CUT ALL WIRES 5FT 18 AWG TXL 89110-6 89111 88960 8/26/2020 REV-Q...
  • Page 85 MVEC #3 BUSS#2-1 GROUND BUSS BW10147 YELL MVEC 3 (CAN B) 89127 CAN HI CAN LO BUSS#2-2 MVEC 89112-4 89112-1 89112-3 89112-5 89112-2 89112 8/26/2020 REV-Q...
  • Page 86 10 AMP MVEC #1 BATT +12V FUSE/RELAY 88953 OUTPUT F8 -- R5 -1A BUSS 1-#7 F4 -- R2 -1B BUSS 1-#6 F2 -- R4 -1C BUSS 3-#7 F1 -- R1 -1D BUSS 3-#1 F7 -- R3 -1E 128-11 HORN F3 -- R7 -1F 128-12 HORN F6 -- R6 -1G 128-7 VIB F5 -- R8 -1H 128-8 VIB BUSS#3...
  • Page 87 MVEC #2 BATT +12V FUSE/RELAY 88953 OUTPUT 10 AMP R12 -- 2A BUSS 7 KEY ON R10 -- 2B BUSS 6 DEF R11 -- 2C BUSS 9 DEF R9 -----2D KEY-1 15 AMP MVEC#2 OUTPUT 88944 8/26/2020 REV-R...
  • Page 88 KEY SWITCH 89108 89107 89009 MVEC 2-D TIER 3- #10 / TIER 4-RELAY (H) BW10147 PLUG BUSS#2-#8 PLUG E-STOP PLUG +24V +24V XC10 C2-26 PLUG B PLUG A 8/26/2020 REV-Q...
  • Page 89 PLUG PLUG 12V-24V CONVERTER EXTENTION CUT ALL 4 WIRES 3FT 18 AWG TXL PLUG PLUG +24V +24V +12v XC10-C1-25 GND BUSS 12-24 CONVERTER CONNECTION PLUG A PLUG B 89102 89209 89146 BW10147 89132 88958 8/26/2020 REV-Q...
  • Page 90 KEY SWITCH 89107 89009 128 PLUG MVEC 2-D 88958 KEY SWITCH PLUG BW10147 TIER 3- #10 / 89108 89132 TIER 4-RELAY (H) 89102 BW10147 BUSS#2-#8 E-STOP SWITCH BUSS XC10-C1-25 E-STOP/KEY SWITCH CONNECTION 12-24 CONVERTER CONNECTION BW10147 +24V +12v E-STOP PLUG GND BUSS XC10-C2-26 89209...
  • Page 91 BUSS BAR SET-UP TIER-3 ONLY BUSS #12 BUSS #13 BUSS #8 BUSS #4 BUSS #5 BUSS #10 BUSS #11 BUSS #3 SOLID SOLID SPLIT SPLIT SOLID SOLID SOLID SPLIT BUSS #1 BUSS #16 BUSS #9 BUSS #7 BUSS #6 BUSS #14 BUSS #15 BUSS #2 SOLID...
  • Page 92 89158 89109 89159 DEUTSCH 128 PLUG 87807 88958 CONTROL HARNESS SIDE 87457 89157 89109-B BW10147 89116 89158 ENGINE HARNESS SIDE 8/26/2020 REV-Q...
  • Page 93 8/26/2020 REV-Q...
  • Page 94 CONTROL DOOR DEUSTCH 128 PLUG J1939 DEF 3 DEF 1 DEF 2 DEF MOD BUSS 14 BUSS 15 BUSS 7 BUSS 9 BUSS 6 PROX A/B DEF TANKS BUSS 10 BUSS 11 BUSS 12 BUSS 13 8/26/2020 REV-Q GROUND BUSS...
  • Page 95 8/26/2020 REV-Q...
  • Page 96 89222 OMNEX RADIO REMOTE 89222-CG PIN-OUT 89223-CG 89122 CAN HI CAN LO - 12VDC + 12VDC 8/26/2020 REV-Q...
  • Page 97 HYDRAULIC / ELECTRICAL SCHEMATICS...
  • Page 101 TRAILER HARNESS...
  • Page 102 89113 PLC WIRING HARNESS PIN-OUT FROM DESCRIPTION WIRE SIZE/COLOR FROM DESCRIPTION WIRE SIZE/COLOR MVEC MAIN PWR V+ (BATTERY) RED 14 AWG 65 BUSS#17-3 VOLUME + B- WHT 18/19 AWG MVEC MAIN PWR V+ (BATTERY) RED 14 AWG 66 BUSS#17-4 VOLUME - B- WHT 18/19 AWG MVEC MAIN PWR V+ (BATTERY)
  • Page 108 TRAILER PLUG PINOUT OPEN NOT USED OPEN NOT USED #2 GREEN BLACK TAIL LIGHTS OPEN NOT USED OPEN NOT USED #2 GREEN TAIL LIGHTS #3 RED #1 BROWN #3 RED #1 BROWN LEFT TURN RIGHT TURN LEFT TURN RIGHT TURN &...
  • Page 109 B50HP TIER4 13822 Oaks Avenue Chino, CA 91710 reedpumps.com PARTS (909) 287 - 2100 PARTS............................3 PUMPING TRAIN ASSEMBLY ....................3 S-TUBE ........................... 5 5” OUTLET ASSEMBLY ..................5 5” OUTLET SEAL KIT INSTALLATION ..............6 WEAR PLATE ASSEMBLY ................... 7 6”...
  • Page 110 B50HP TIER4 13822 Oaks Avenue Chino, CA 91710 reedpumps.com PARTS (909) 287 - 2100 ESTOP, KEY ASSEMBLY, PLUGS ............61 BUSSES, CONNECTORS, PINS ............. 62 SERIAL PLATE IDENTICATION ................. 63 BUSS BAR SET-UP.................... 64 CAN PUSH BUTTON SWITCH PLUG ..............65 SWITCH A ....................

  • Page 111: Pumping Train Assembly

    B50HP TIER4 13822 Oaks Avenue Chino, CA 91710 reedpumps.com PARTS (909) 287 - 2100 PARTS PUMPING TRAIN ASSEMBLY WATERBOX TOP VIEW WITH OUT AGITATOR ONLY DETAIL C DETAIL B DETAIL A 4, 5, ID # PART # PART DESCRIPTION QUANTITY...
  • Page 112 B50HP TIER4 13822 Oaks Avenue Chino, CA 91710 reedpumps.com PARTS (909) 287 - 2100 PUMPING TRAIN ASSEMBLY CONTINUED DUAL SHIFT (OPTION) DETAIL D DETAIL G 300 FT-LB DETAIL F 280 FT-LB ID # PART # PART DESCRIPTION QUANTITY 86047 TIE ROD, 1" X 51½”...

  • Page 113: S-Tube

    B50HP TIER4 13822 Oaks Avenue Chino, CA 91710 reedpumps.com PARTS (909) 287 - 2100 S-TUBE 5” OUTLET ASSEMBLY DETAIL A VIEW A ID # PART # PART DESCRIPTION QUANTITY 86321 OUTLET ASSEMBLY HHCS, 5/8 – 18X3” ¼ “ GR 8 LOCK NUT, 5/8 -18 GREASE FITTING, 1/8”...

  • Page 114: 5" Outlet Seal Kit Installation

    B50HP TIER4 13822 Oaks Avenue Chino, CA 91710 reedpumps.com PARTS (909) 287 - 2100 5” OUTLET SEAL KIT INSTALLATION VIEW A GROOVE IN SEAL ID # PART # PART DESCRIPTION QUANTITY 79895 SEAL KIT 77762 O-RING-#257 BUNA 90 77761 O-RING-#264 BUNA 90...

  • Page 115: Wear Plate Assembly

    B50HP TIER4 13822 Oaks Avenue Chino, CA 91710 reedpumps.com PARTS (909) 287 - 2100 WEAR PLATE ASSEMBLY DETAIL B CONCRETE CYLINDER S TUBE ID # PART # PART DESCRIPTION QUANTITY 86149 O-RING, #259 BUENA 70 FHCS, ¾ - 10X 4½” GR 8 FHCS, ¾...

  • Page 116: 6" Piston Cup Assembly

    B50HP TIER4 13822 Oaks Avenue Chino, CA 91710 reedpumps.com PARTS (909) 287 - 2100 6” PISTON CUP ASSEMBLY DETAIL C 6, 7 ID # PART # PART DESCRIPTION QUANTITY 86101 PISTON COUPLING, 8.06 LONG 77194 PISTON-CONC. ADAPTER 6" 77120 WEAR RING(GUIDE BAND) 6"...

  • Page 117: Drive Cylinder Assembly

    B50HP TIER4 13822 Oaks Avenue Chino, CA 91710 reedpumps.com PARTS (909) 287 - 2100 DRIVE CYLINDER ASSEMBLY ID # PART # PART DESCRIPTION QUANTITY 86304-2 HYD CYLINDER GROUP 78961 CHECK VALVE-5K PSI O-RING 86748 FITTING-MB-MJ90-6-6 ELBOW, MB-MB90-6-6 86223HT HYDRAULIC CYLINDER 3.50 X 2.00 X 35.75...

  • Page 118: Dual Shift Bell Crank Assembly

    B50HP TIER4 13822 Oaks Avenue Chino, CA 91710 reedpumps.com PARTS (909) 287 - 2100 DUAL SHIFT BELL CRANK ASSEMBLY DETAIL E ID # PART # PART DESCRIPTION QUANTITY 86320 S-TUBE SHIFT GROUP, DUAL 85956 BELL CRANK, 3” SPLINE, DUAL 86985...

  • Page 119: Dual Shift Cylinder Assembly

    B50HP TIER4 13822 Oaks Avenue Chino, CA 91710 reedpumps.com PARTS (909) 287 - 2100 DUAL SHIFT CYLINDER ASSEMBLY DETAIL E ID # PART # PART DESCRIPTION QUANTITY 86220HT SWING RAM-DUAL-2.50 X 5.75 STROKE 86220A-SK SEAL KIT B50HP-V25 REV A 11 of 88...

  • Page 120: Dual Shift Assembly

    B50HP TIER4 13822 Oaks Avenue Chino, CA 91710 reedpumps.com PARTS (909) 287 - 2100 DUAL SHIFT ASSEMBLY DETAIL E SPACE AS REQUIRED FOR PROPER S-TUBE 4 or 5 ALIGNMENT SPACE AS REQUIRED FOR PROPER S-TUBE 4 or 5 ALIGNMENT ID #...

  • Page 121: Hopper

    B50HP TIER4 13822 Oaks Avenue Chino, CA 91710 reedpumps.com PARTS (909) 287 - 2100 HOPPER AGITATOR ASSEMBLY VIEW F DETAIL F ID # PART # PART DESCRIPTION QUANTITY 86322 AGITATOR ASSEMBLY 70211 FLANGE SEAL S/W 70212 SEAL REMIXER 85978 BEARING, BALL, PLAIN...
  • Page 122 B50HP TIER4 13822 Oaks Avenue Chino, CA 91710 reedpumps.com PARTS (909) 287 - 2100 AGITATOR ASSEMBLY CONTINUED DETAIL G NOTE* Install Grove as shown VIEW G ID # PART # PART DESCRIPTION QUANTITY GREASE FITTING, 1/8” NPT STRAIT 70219 REMIX SHAFT BUSHING...

  • Page 123: Safety Grate

    B50HP TIER4 13822 Oaks Avenue Chino, CA 91710 reedpumps.com PARTS (909) 287 - 2100 SAFETY GRATE ID # PART # PART DESCRIPTION QUANTITY 87369 PROXIMITY SENSOR PNP HOPPER GRATE 801902-006 CLAMP,18MM TUBE CLAMP SET 87997 COVER WELD PROX SWITCH HOPPER...

  • Page 124: Grate Assembly

    B50HP TIER4 13822 Oaks Avenue Chino, CA 91710 reedpumps.com PARTS (909) 287 - 2100 GRATE ASSEMBLY 7, 8, 9 10, 11, 12 ID # PART # PART DESCRIPTION QUANTITY 87835 GRATE WELDMENT, STD HOPPER 87857 PIN WELDMENT LONG 87858 PIN WELDMENT SHORT...

  • Page 125: Clean Out Door Assembly

    B50HP TIER4 13822 Oaks Avenue Chino, CA 91710 reedpumps.com PARTS (909) 287 - 2100 CLEAN OUT DOOR ASSEMBLY ID # PART # PART DESCRIPTION QUANTITY 86988 DOOR WELDMENT, CLEAN OUT 86559 BLOCK, CLEAN OUT DOOR, LH 86560 BLOCK, CLEAN OUT DOOR, RH 86922 SHOULDER SCREW 1"...

  • Page 126: Power Train Group

    B50HP TIER4 13822 Oaks Avenue Chino, CA 91710 reedpumps.com PARTS (909) 287 - 2100 POWER TRAIN GROUP ENGINE TIER-4 ID # PART # PART DESCRIPTION QUANTITY 89552 POWER TRAIN B50/70 TIER4 140CC KAWAS 88876 ENGINE QSB4.5 130 HP CUMMINS TIER4...

  • Page 127: Main Hydraulic Pump

    B50HP TIER4 13822 Oaks Avenue Chino, CA 91710 reedpumps.com PARTS (909) 287 - 2100 MAIN HYDRAULIC PUMP GEAR PUMP/PUMP DRIVE K3VL140 ID # PART # PART DESCRIPTION QUANTITY 87723 PUMP,140CC, KAWASAKI 87360 PUMP DRIVE -SAE 3 - SAE D 87571-1 GEAR PUMP, 23/11.3 CC RH, A-PAD SPL...

  • Page 128: Fittings

    B50HP TIER4 13822 Oaks Avenue Chino, CA 91710 reedpumps.com PARTS (909) 287 - 2100 FITTINGS ID # PART # PART DESCRIPTION QUANTITY 86264-007 SPLIT FLANGE-CODE 61- 40 SAE 86911-009 STEM, 2 ½” 90 DEG, 40GL-40FL90 79803 CLAMP - T-BOLT - 3.00 DIA...

  • Page 129: Exhaust Aftertreatment Tier4

    B50HP TIER4 13822 Oaks Avenue Chino, CA 91710 reedpumps.com PARTS (909) 287 - 2100 EXHAUST AFTERTREATMENT TIER4 ID # PART # PART DESCRIPTION QUANTITY BRACKET 4 CYL CUMMINS EXHAUST 74679 PLUG 1/4" NPT SOCKET HEAD 89348 HEAT BLANKET 89424 T4 ROOF HARNESS SUPPORT, C-SERIES W-114850 RUBBER BUFFER, 65X22.5X26...
  • Page 130 B50HP TIER4 13822 Oaks Avenue Chino, CA 91710 reedpumps.com PARTS (909) 287 - 2100 B50HP-V25 REV A 22 of 88...
  • Page 131 B50HP TIER4 13822 Oaks Avenue Chino, CA 91710 reedpumps.com PARTS (909) 287 - 2100 B50HP-V25 REV A 23 of 88...
  • Page 132 B50HP TIER4 13822 Oaks Avenue Chino, CA 91710 reedpumps.com PARTS (909) 287 - 2100 ID # PART # PART DESCRIPTION QUANTITY 89267 DEF COOLANT GROUP 88794-DT DEF TANK 89346 HOLD DOWN STRAP, 1” 88794-022 VALVE, DEF TANK HEATER B50HP-V25 REV A...

  • Page 133: Def Coolant Group

    B50HP TIER4 13822 Oaks Avenue Chino, CA 91710 reedpumps.com PARTS (909) 287 - 2100 DEF COOLANT GROUP ID # PART # PART DESCRIPTION QUANTITY 88794-CCV VALVE, COOLANT CONTROL, 11EA2V 89268 COOLANT MANIFOLD 89268-B MANIFOLD BRACKET 89269 BRASS FITTING, ½” NPT TO 5/8” QC 89269-1 QUICK CONNECT FITTING, 5/8”...
  • Page 134 B50HP TIER4 13822 Oaks Avenue Chino, CA 91710 reedpumps.com PARTS (909) 287 - 2100 DEF COOLANT GROUP ID # PART # PART DESCRIPTION QUANTITY DEF PUMP FILTER, DEF PUMP 88794-001 DEF HOSE, SUCTION (YELL) 88794-002 DEF HOSE, RETURN LINE (RED)
  • Page 135 B50HP TIER4 13822 Oaks Avenue Chino, CA 91710 reedpumps.com PARTS (909) 287 - 2100 DEF COOLANT GROUP ID # PART # PART DESCRIPTION QUANTITY SPARE PARTS 88794-007 AFTERTREATMENT SENSOR, NOx INLET 88794-008 AFTERTREATMENT SENSOR, NOx OUTLET B50HP-V25 REV A 27 of 88...

  • Page 136: Tanks

    B50HP TIER4 13822 Oaks Avenue Chino, CA 91710 reedpumps.com PARTS (909) 287 - 2100 TANKS FUEL TANK ASSEMBLY ID # PART # PART DESCRIPTION QUANTITY 89484 FUEL TANK ASSY B-SERIES TIER-4 89479 FUEL TANK WELDMENT, B-SERIES TIER-4 85570 FUEL CAP, 1 1/2 IN VENTED...
  • Page 137 B50HP TIER4 13822 Oaks Avenue Chino, CA 91710 reedpumps.com PARTS (909) 287 - 2100 FUEL TANK ASSEMBLY ID # PART # PART DESCRIPTION QUANTITY 10297 PLUG-GALV 1/2" (AS NEEDED) 87566 FITTING BARBED-JIC, 3/8-3/8MPT (STRAIGHT) 87567 FITTING (90 DEG) METRIC TO JIC...

  • Page 138: Hydraulic Group

    B50HP TIER4 13822 Oaks Avenue Chino, CA 91710 reedpumps.com PARTS (909) 287 - 2100 HYDRAULIC GROUP HYDRAULIC TANK ASSEMBLY ID # PART # PART DESCRIPTION QUANTITY 89554 HYD GR. B SER, TIER4, KAW 89199 HYD TANK ASSY B-SERIES 89195 HYDRAULIC TANK WELDMENT, B-TIER4...
  • Page 139 B50HP TIER4 13822 Oaks Avenue Chino, CA 91710 reedpumps.com PARTS (909) 287 - 2100 HYDRAULIC TANK ASSEMBLY CONTINUED ID # PART # PART DESCRIPTION QUANTITY 74509 GAUGE-SIGHT/TEMPERATURE 801025 DRAIN COCK, 1/4 NPT BG-12 ¾” SAE PLUG 70366 PRESSURE GAUGE, 3000 PSI/BAR...

  • Page 140: Manifolds

    B50HP TIER4 13822 Oaks Avenue Chino, CA 91710 reedpumps.com PARTS (909) 287 - 2100 MANIFOLDS DRIVE CYLINDER CIRCUIT MANIFOLD ASSEMBLY TORQUE ½ -13 X 2 ½” SHCS 80 FT-LBS 6 PLACES ½ -13 X 4” SHCS TORQUE 75 FT-LBS 4 PLACES...
  • Page 141 B50HP TIER4 13822 Oaks Avenue Chino, CA 91710 reedpumps.com PARTS (909) 287 - 2100 DRIVE CYLINDER CIRCUIT MANIFOLD ASSEMBLY CONT. DRIVE CYLINDER VALVE DRIVE CYLINDER ASSEMBLY COMPLETE PILOT SOLENOID VALVE 85689 DRIVE CYLINDER MAIN VALVE DRIVE CYLINDER PILOT SOLENOID VALVE ASSEMBLY...

  • Page 142: S-Tube Circuit Manifold Assembly

    B50HP TIER4 13822 Oaks Avenue Chino, CA 91710 reedpumps.com PARTS (909) 287 - 2100 S-TUBE CIRCUIT MANIFOLD ASSEMBLY TORQUE SHCS ½”-13 X 2 ½” 70 FT-LBS 6 PLACE TORQUE 30-35 FT-LBS TORQUE 45-50 FT-LBS SHCS ½ -13 X 4” O-RING...
  • Page 143 B50HP TIER4 13822 Oaks Avenue Chino, CA 91710 reedpumps.com PARTS (909) 287 - 2100 S-TUBE CIRCUIT MANIFOLD ASSEMBLY CONT. S-TUBE PILOT SWING TUBE VALVE SOLENOID ASSEMBLY COMPLETE VALVE 85693 S-TUBE MAIN VALVE S-TUBE PILOT SOLENOID VALVE ASSEMBLY 85695 O-RING KIT...

  • Page 144: Accumulator Assembly

    B50HP TIER4 13822 Oaks Avenue Chino, CA 91710 reedpumps.com PARTS (909) 287 - 2100 ACCUMULATOR ASSEMBLY FRAME RAIL ID # PART # PART DESCRIPTION QUANTITY 74515 ACCUMULATOR-1 GAL 3000PSI 74516 BLADDER, 1 GAL. 85812 BLADDER SEAL KIT 73171 ACCUMULATOR BKT.W/CLOSING HARDWARE...

  • Page 145: Electrical Group

    B50HP TIER4 13822 Oaks Avenue Chino, CA 91710 reedpumps.com PARTS (909) 287 - 2100 ELECTRICAL GROUP PROXIMITY SENSOR ID # PART # PART DESCRIPTION QUANTITY 87930 ELECTRICAL GROUP B SER 2008 CUMMINS 77998 PROXIMITY SENSOR NPN FLUSH BOX MOUT 10522...

  • Page 146: Temperture Sensor Hyd

    B50HP TIER4 13822 Oaks Avenue Chino, CA 91710 reedpumps.com PARTS (909) 287 - 2100 TEMPERTURE SENSOR HYD ID # PART # PART DESCRIPTION QUANTITY 89279 SENSOR TEMPERTURE FOR TIER4 CUMMINS 89633 ADAPTER TEMP SENSOR FOR 89279 B50HP-V25 REV A 38 of 88...

  • Page 147: Battery Assembly

    B50HP TIER4 13822 Oaks Avenue Chino, CA 91710 reedpumps.com PARTS (909) 287 - 2100 BATTERY ASSEMBLY ID # PART # PART DESCRIPTION QUANTITY 89477-T4 ELECTRICAL GROUP B-SERIES, PLC TIER-4 CUMM 77075 BATTERY-12V 1000 CCA31 89524-P CABLE,46” BATTERY RED 4/0 89524-N CABLE, 44”...

  • Page 148: Trailer Harness And Breakaway

    B50HP TIER4 13822 Oaks Avenue Chino, CA 91710 reedpumps.com PARTS (909) 287 - 2100 TRAILER HARNESS AND BREAKAWAY ID # PART # PART DESCRIPTION QUANTITY 86532 TRAILER HARNESS- C-SERIES 77705 BREAK-AWAY KIT 5000 SERIES 86579 TRAILER PLUG 7C FLAT PI...

  • Page 149: Tail Lights

    B50HP TIER4 13822 Oaks Avenue Chino, CA 91710 reedpumps.com PARTS (909) 287 - 2100 TAIL LIGHTS UNDERSIDE ID # PART # PART DESCRIPTION QUANTITY 72948 TAIL LIGHT 87665 LOOM, CLAMP 7/8" 72949 GROMMET B50HP-V25 REV A 41 of 88...

  • Page 150: Tier-4 Main Wiring Harness

    B50HP TIER4 13822 Oaks Avenue Chino, CA 91710 reedpumps.com PARTS (909) 287 - 2100 TIER-4 MAIN WIRING HARNESS B50HP-V25 REV A 42 of 88...
  • Page 151 B50HP TIER4 13822 Oaks Avenue Chino, CA 91710 reedpumps.com PARTS (909) 287 - 2100 TIER-4 ROOF HARNESS B50HP-V25 REV A 43 of 88...
  • Page 152 B50HP TIER4 13822 Oaks Avenue Chino, CA 91710 reedpumps.com PARTS (909) 287 - 2100 ID # PART # PART DESCRIPTION QUANTITY 89052 WIRING HARNESS, B SERIES PLC TIER 4 87540 CABLE SOLENOID 88243 CABLE WITH 2 DIN PLUGS 5M 87540-1...
  • Page 153 B50HP TIER4 13822 Oaks Avenue Chino, CA 91710 reedpumps.com PARTS (909) 287 - 2100 ID # PART # PART DESCRIPTION QUANTITY 89156 DEUTSCH RECEPTACLE 128 CONTACT 89116 DEUTSCH WEDGE LOCK FOR 89109 87457 PINS, FOR 87456 BW10147 CONTACT SOCKET SIZE-16, 13 AMP, PIN...
  • Page 154 B50HP TIER4 13822 Oaks Avenue Chino, CA 91710 reedpumps.com PARTS (909) 287 - 2100 ID # PART # PART DESCRIPTION QUANTITY 89314 PLUG, APEX 150 SERIES, 24 CAVITY ID # PART # PART DESCRIPTION QUANTITY 88935 3 EAY PLUG DT SER...
  • Page 155 B50HP TIER4 13822 Oaks Avenue Chino, CA 91710 reedpumps.com PARTS (909) 287 - 2100 ID # PART # PART DESCRIPTION QUANTITY 89316 PLUG. HDSCS SERIES, 4 CAVITY GRAY 89316-3 BACKSHELL, 89315, 89316 ID # PART # PART DESCRIPTION QUANTITY 89315 PLUG.
  • Page 156 B50HP TIER4 13822 Oaks Avenue Chino, CA 91710 reedpumps.com PARTS (909) 287 - 2100 ID # PART # PART DESCRIPTION QUANTITY 89102 DEUTSCH DT06 PLUG, 2X2 89132 WEDGE,DEUTSCH FOR 89102 89102-B BOOT FOR 89102, 4 CAVITY SOCKET ID # PART #...
  • Page 157 B50HP TIER4 13822 Oaks Avenue Chino, CA 91710 reedpumps.com PARTS (909) 287 - 2100 ID # PART # PART DESCRIPTION QUANTITY 89319 RECEPTICAL, METRIPAK 150 SERIES, 6 CAVITY 89319-3 WEDGE LOCK, METRIPAK 150 CAV, FOR 89319 ID # PART #...
  • Page 158 B50HP TIER4 13822 Oaks Avenue Chino, CA 91710 reedpumps.com PARTS (909) 287 - 2100 ID # PART # PART DESCRIPTION QUANTITY 89321 PLUG, AMP SERIES, 4 CAVITY 89321-3 COVER FOR 89321 ID # PART # PART DESCRIPTION QUANTITY 89322 PLUG, BOSCH, 2 CAVITY...
  • Page 159 B50HP TIER4 13822 Oaks Avenue Chino, CA 91710 reedpumps.com PARTS (909) 287 - 2100 ID # PART # PART DESCRIPTION QUANTITY 89323 PLUG, METIPAK 150.2 SERIES, 2 CAVITY 89323-1 TERMINAL, 150 SERIES, 16-18 AWG FOR 89323 ID # PART #...
  • Page 160 B50HP TIER4 13822 Oaks Avenue Chino, CA 91710 reedpumps.com PARTS (909) 287 - 2100 ID # PART # PART DESCRIPTION QUANTITY 87456 PLUG SOCKET CONNECTOR, 8PIN ID # PART # PART DESCRIPTION QUANTITY 89217 DEUTSCH HD34 RECP, 8 PIN 88479...
  • Page 161 B50HP TIER4 13822 Oaks Avenue Chino, CA 91710 reedpumps.com PARTS (909) 287 - 2100 ID # PART # PART DESCRIPTION QUANTITY 89277 DEUTSH DT706 PLUG, 2 CAVITY 89277-A WEDGE FOR 89277 ID # PART # PART DESCRIPTION QUANTITY 88733-1 FUSE HOLDER INLINE, BLADE STYLE, 30AMP...

  • Page 162: Plc Controls

    B50HP TIER4 13822 Oaks Avenue Chino, CA 91710 reedpumps.com PARTS (909) 287 - 2100 PLC CONTROLS B-SERIES CONTROL PANEL ID # PART # PART DESCRIPTION QUANTITY 89333-T4 B-SERIES CONTROL PANEL ASSY. 89090 EMERGENCY STOP PUSH BUTTON HEAVY DUTY 89090-L ILLUMINATED E-STOP RING...

  • Page 163: Key Pad Switches Insert Kit

    B50HP TIER4 13822 Oaks Avenue Chino, CA 91710 reedpumps.com PARTS (909) 287 - 2100 KEY PAD SWITCHES INSERT KIT ID # PART # PART DESCRIPTION QUANTITY 89412-BC INSERT KIT FOR PLC SWITCH FUNCTIONS INSERT,REMOTE ICON (CLEAR) 89412-2L INSERT,PRESSURE A/B ICON (CLEAR)
  • Page 164 B50HP TIER4 13822 Oaks Avenue Chino, CA 91710 reedpumps.com PARTS (909) 287 - 2100 KEY PAD SWITCHES INSERT KIT CONT. ID # PART # PART DESCRIPTION QUANTITY INSERT, THROTTLE GAIN ICON (CLEAR) 89412-9S INSERT, TROTTLE DROP ICON (CLEAR) 89412-10S INSERT, PUMP VOLUME (-) (CLEAR)

  • Page 165: Mvec/Fuse/Relay

    B50HP TIER4 13822 Oaks Avenue Chino, CA 91710 reedpumps.com PARTS (909) 287 - 2100 MVEC/FUSE/RELAY MVEC 3 MVEC 1 MVEC 2 ID # PART # PART DESCRIPTION QUANTITY MVEC, 12 RELAY, BUSSMAN 88980 AUTOMOTIVE MINITURE BLADE FUSE 10AMP 88953 MVEC,RELAY,12V...
  • Page 166 B50HP TIER4 13822 Oaks Avenue Chino, CA 91710 reedpumps.com PARTS (909) 287 - 2100 MVEC/FUSE/RELAY BUSS#3 (R1,R4) BUSS#1 HORN (R2,R5) (R7) VIB (R8) VIB (R6) HORN (R3) 89128 B50HP-V25 REV A 58 of 88...
  • Page 167 B50HP TIER4 13822 Oaks Avenue Chino, CA 91710 reedpumps.com PARTS (909) 287 - 2100 EXPANSION MODULE PARKER IQAN-XC10 ID # PART # PART DESCRIPTION QUANTITY 88919 XC10, PARKER EXPANTION MODULE 88945 AMP, 35 POS SEAL PLUG, BLACK (C1) 88946 AMP, 35 POS SEAL PLUG, WHITE (C2)
  • Page 168 B50HP TIER4 13822 Oaks Avenue Chino, CA 91710 reedpumps.com PARTS (909) 287 - 2100 MD3 DISPLAY MODULE FRONT BACK ID # PART # PART DESCRIPTION QUANTITY 88918 MD3,PARKER DISPLAY 88653 PLUG DTM 12 WAY A KEY, GREY (C1) 88653-2 WEDGELOCK DTM 12 WAY PLUG (C1) 88959 CONTACT SOCKET SIZE 20 (7.5 AMP) (C1)

  • Page 169: Estop, Key Assembly, Plugs

    B50HP TIER4 13822 Oaks Avenue Chino, CA 91710 reedpumps.com PARTS (909) 287 - 2100 ESTOP, KEY ASSEMBLY, PLUGS ESTOP ASSEMBLY KEY ASSEMBLY ID # PART # PART DESCRIPTION QUANTITY 89090 EMERGENCY STOP BUTTON HEAVY DUTY 89090-L ILLUMINATED E-STOP RING 89004...

  • Page 170: Busses, Connectors, Pins

    B50HP TIER4 13822 Oaks Avenue Chino, CA 91710 reedpumps.com PARTS (909) 287 - 2100 BUSSES, CONNECTORS, PINS BUSS-2 BUSS-7 BUSS-16 BUSS-1 BUSS-14 BUSS-15 BUSS-10 BUSS-11 BUSS-12 BUSS-13 BUSS-3 BUSS-4 BUSS-5 BUSS-8 ID # PART # PART DESCRIPTION QUANTITY 89180 DEUTSCH DT04 BUS, 1X8 (SOLID)

  • Page 171: Serial Plate Identication

    B50HP TIER4 13822 Oaks Avenue Chino, CA 91710 reedpumps.com PARTS (909) 287 - 2100 SERIAL PLATE IDENTICATION Serial Plate Identification Tier version Panel serial # Display serial # Pump type Expansion module serial # PLC program Fuse/Relay box serial #...

  • Page 172: Buss Bar Set-Up

    B50HP TIER4 13822 Oaks Avenue Chino, CA 91710 reedpumps.com PARTS (909) 287 - 2100 BUSS BAR SET-UP B50HP-V25 REV A 64 of 88...

  • Page 173: Can Push Button Switch Plug

    B50HP TIER4 13822 Oaks Avenue Chino, CA 91710 reedpumps.com PARTS (909) 287 - 2100 CAN PUSH BUTTON SWITCH PLUG SWITCH A CAN SWITCH A ID # PART # PART DESCRIPTION QUANTITY 89102 DEUTSCH DT04 PLUG, 2X2 89132 DEUTSCH WEDGE LOCK FOR 89102...

  • Page 174: Can Push Button Switch Plug

    B50HP TIER4 13822 Oaks Avenue Chino, CA 91710 reedpumps.com PARTS (909) 287 - 2100 CAN PUSH BUTTON SWITCH PLUG SWITCH B CAN SWITCH B ID # PART # PART DESCRIPTION QUANTITY 89102 DEUTSCH DT04 PLUG, 2X2 DEUTSCH WEDGE LOCK 89132...

  • Page 175: Can Plugs, Connectors

    B50HP TIER4 13822 Oaks Avenue Chino, CA 91710 reedpumps.com PARTS (909) 287 - 2100 CAN PLUGS, CONNECTORS GREEN BLUE BLUE NOTE* GREEN-CIRCLE BLUE-TRIANGLE BLUE ENGINE CAN J1939 ID # PART # PART DESCRIPTION QUANTITY 88934 3 WAY T RECEPTICAL, DT SER.

  • Page 176: Deutsch 128 Plug Assembly

    B50HP TIER4 13822 Oaks Avenue Chino, CA 91710 reedpumps.com PARTS (909) 287 - 2100 DEUTSCH 128 PLUG ASSEMBLY CONTROL HARNESS SIDE ENGINE HARNESS SIDE B50HP-V25 REV A 68 of 88...
  • Page 177 B50HP TIER4 13822 Oaks Avenue Chino, CA 91710 reedpumps.com PARTS (909) 287 - 2100 DEUTSCH 128 PLUG ASSEMBLY CONT. PLUG ASSEMBLY ID # PART # PART DESCRIPTION QUANTITY 89109 DEUTSCH RECEPTACLE 128 CONTACT, PIN 89159 DEUTSCH WEDGE LOCK FOR 89157...

  • Page 178: Wire Harness Main Layout

    B50HP TIER4 13822 Oaks Avenue Chino, CA 91710 reedpumps.com PARTS (909) 287 - 2100 WIRE HARNESS MAIN LAYOUT B50HP-V25 REV A 70 of 88...

  • Page 179: Wire Harness Door Layout

    B50HP TIER4 13822 Oaks Avenue Chino, CA 91710 reedpumps.com PARTS (909) 287 - 2100 WIRE HARNESS DOOR LAYOUT B50HP-V25 REV A 71 of 88...

  • Page 180: Frame Installation

    B50HP TIER4 13822 Oaks Avenue Chino, CA 91710 reedpumps.com PARTS (909) 287 - 2100 FRAME INSTALLATION FRAME, TIRES, JACK, AND TOW EYE ID # PART # PART DESCRIPTION QUANTITY 89486 FRAME ASSY B SER TIER4 89485 FRAME WELDMENT 36” STROKE, TIER4 85423 TIRE &...

  • Page 181: 7000Lb Axle Mounting Assembly Front

    B50HP TIER4 13822 Oaks Avenue Chino, CA 91710 reedpumps.com PARTS (909) 287 - 2100 7000LB AXLE MOUNTING ASSEMBLY FRONT ID # PART # PART DESCRIPTION QUANTITY AXLE MOUNTING HARDWARE KIT ½” -20 X 2.5 HHCS GR8 ½” SAE WASHER ½” USE WASHER ½”...

  • Page 182: 7000Lb Axle Mounting Assembly Rear

    B50HP TIER4 13822 Oaks Avenue Chino, CA 91710 reedpumps.com PARTS (909) 287 - 2100 7000LB AXLE MOUNTING ASSEMBLY REAR REAR AXLE MOUNT ID # PART # PART DESCRIPTION QUANTITY AXLE MOUNTING HARDWARE KIT ½” SAE WASHER ½” USE WASHER ½” – 20 LOCK NUT ½”...

  • Page 183: Hood And Covers

    B50HP TIER4 13822 Oaks Avenue Chino, CA 91710 reedpumps.com PARTS (909) 287 - 2100 HOOD AND COVERS FLUSH BOX ASSEMBLY TOP COVER BOTTOM COVER ID # PART # PART DESCRIPTION QUANTITY 89482 COVER TOP, B SER CUMMINS T4 PAINTED 89284...

  • Page 184: Fenders And Outriggers

    B50HP TIER4 13822 Oaks Avenue Chino, CA 91710 reedpumps.com PARTS (909) 287 - 2100 FENDERS AND OUTRIGGERS ID # PART # PART DESCRIPTION QUANTITY 85394 FENDER, NON-OPERATOR SIDE, C-SERIES PAINTED 85395 FENDER, OPERATOR SIDE, C-SERIES PAINTED 86553 OUTRIGGER WELDMNT, INNER-PAINTED 86557 OUTERTUBE, O/R B &...

  • Page 185: Options

    B50HP TIER4 13822 Oaks Avenue Chino, CA 91710 reedpumps.com PARTS (909) 287 - 2100 OPTIONS HYDRAULIC OUTRIGGER GROUP ID # PART # PART DESCRIPTION QUANTITY 88041-O HYD OUTRIGGER GROUP 88041-AO AGITATOR/OUTRIGGER GROUP 85685 TUBE, HYD, OUTRIGGER - PAINTED 85686 TUBE, HYD, OUTRIGGER - PAINTED 85659-010 HOSE, 4M2T-6FJX-6FJX-33.00...

  • Page 186: Spool Control Valve

    B50HP TIER4 13822 Oaks Avenue Chino, CA 91710 reedpumps.com PARTS (909) 287 - 2100 OPTIONS 3 SPOOL CONTROL VALVE DETAIL A DETAIL B DETAIL D DETAIL C ID # PART # PART DESCRIPTION QUANTITY 85706 RELIEF, CARTRIDGE 74469 DETENT KIT, #11 WALVOIL VALVE...

  • Page 187: Hydraulic Outrigger Group

    B50HP TIER4 13822 Oaks Avenue Chino, CA 91710 reedpumps.com PARTS (909) 287 - 2100 OPTIONS HYDRAULIC OUTRIGGER GROUP ID # PART # PART DESCRIPTION QUANTITY 86574 HYD CYL – 2.00 BORE X 12.00 STR – PAINTED 85659-010 HOSE, 4M2T-6FJX-6FJX-33.00 86728-008 FITTING, 90°...
  • Page 188 B50HP TIER4 13822 Oaks Avenue Chino, CA 91710 reedpumps.com PARTS (909) 287 - 2100 OPTIONS ELECTRIC HYDRAULIC OUTRIGGER ID # PART # PART DESCRIPTION QUANTITY 88041-AO1 HYD OUTRIGGER ASSEMBLY, REMOTE 85659-010 HOSE, 4M2T-6FX-6JX-33.00 87540 CABLE SOLENIOD VALVE, TURCK 88026 VALVE, 3SPOOL, 2EA. VDC SPOOL...

  • Page 189: Electric Hydraulic Outrigger Controls

    B50HP TIER4 13822 Oaks Avenue Chino, CA 91710 reedpumps.com PARTS (909) 287 - 2100 OPTIONS ELECTRIC HYDRAULIC OUTRIGGER CONTROLS 3/8-16X1” BOLT 3/8 FLAT WASHER 3/8 LOCKNUT ID # PART # PART DESCRIPTION QUANTITY 801206 ENCLOSURE 6X3X3, FIBERGLASS 88163 DECAL OUTRIGGER UP/DOWN...

  • Page 190: Agitator Group

    B50HP TIER4 13822 Oaks Avenue Chino, CA 91710 reedpumps.com PARTS (909) 287 - 2100 OPTIONS AGITATOR GROUP 1 SPOOL CONTROL VALVE ID # PART # PART DESCRIPTION QUANTITY 74584 VALVE, MAUNAL-1 SPOOL 86746 FITTING, 90° MB-MJ-90-8-10 86748 FITTING, 90° MB-MJ90-6-6 86747 FITTING, 90°...

  • Page 191: Spool Agitator Valve

    B50HP TIER4 13822 Oaks Avenue Chino, CA 91710 reedpumps.com PARTS (909) 287 - 2100 OPTIONS 1 SPOOL AGITATOR VALVE DETAIL B DETAIL A DETAIL C ID # PART # PART DESCRIPTION QUANTITY 85706 RELIEF, CARTRIDGE 74469 DETENT KIT, #11 WALVOIL VALVE...
  • Page 192 B50HP TIER4 13822 Oaks Avenue Chino, CA 91710 reedpumps.com PARTS (909) 287 - 2100 OPTIONS AGITATOR GROUP CONTINUED ID # PART # PART DESCRIPTION QUANTITY 74584 VALVE, MANUAL-1 SPOOL 85657-016 HOSE, 8M2T-10FJX-10FJX45-20.00 85658-011 HOSE, 6M2T-6FJX-6FJX-21.00 85658-010 HOSE, 6M2T-6FJX-6FJX-20.00 FITTING, MB-MJ-10-6...

  • Page 193: Available Options

    B50HP TIER4 13822 Oaks Avenue Chino, CA 91710 reedpumps.com PARTS (909) 287 - 2100 AVAILABLE OPTIONS OUTRIGGER GROUP HYD OUTRIGGER OUTRIGGER/AGITATOR ELECTRIC OUTRIGGER AGITATOR GROUP STD/PADDLE OPTION/PADDLE HYD/AGITATOR/SINGLE HYD/AGITATOR/TRIPLE RADIO REMOTE AARCOMM 2-WAY RADIO W/STROKE COUNTER AND VOLUME INDICATOR (IF EQUIPPED) 50’...
  • Page 194 B50HP TIER4 13822 Oaks Avenue Chino, CA 91710 reedpumps.com PARTS (909) 287 - 2100 CARBIDE WEAR PARTS WEAR RING/CARBIDE WEAR PLATE/CARBIDE ELECTRIC VOLUME/FLOW CONTROL RADIO CONROL OF VOLUME (IF EQUIPPED) WATER PUMP WASH PUMP INSTALL WASH PUMP ASSY VIBRATOR KIT...
  • Page 195 B50HP TIER4 13822 Oaks Avenue Chino, CA 91710 reedpumps.com PARTS (909) 287 - 2100 TIRE & WHEEL ALUMINUM 9000 LB AUTO LUBE STEEL TUBING 12 PORT PLASTIC TUBING 12 PORT MANUAL LUBE BLOCK REMOTE EMERGENCY STOP B50HP-V25 REV A 87 of 88...
  • Page 196 B50HP TIER4 13822 Oaks Avenue Chino, CA 91710 reedpumps.com PARTS (909) 287 - 2100 SURGE BRAKE ASSY 9000LB 2"BALL 3”PINTLE HITCH BALL 2" 2 5/16" REINFORCED HOPPER B50HP-V25 REV A 88 of 88...

Table of Contents