Hitachi RAK-25PEB Service Manual page 36

(1) Pressing the "POWERFUL" button will increase the temperature setting by PWSFTW.
(2) The powerful operation is for 20 minutes after setting.
(3) Operation is continued forcibly thermo-ON for 20 minutes after the powerful operation is finished.
(4) Defrost is inhibited for 20 minutes after the start of the powerful operation.
(5) Pressing the "START/STOP" button and "POWERFUL"button during powerful operation wil cancel
the powerful operation.
(6) If the sleep timer is set during powerful operation, the powerful operation will be canceled.
(7) When the powerful operation is set, the fan speed will be set to "HIGH" and the compressor's
maximum speed will be set to WMAX2 during powerful operation. The compressor's lower limit
speed is WKYMIN_PW.
(8) After the powerful operation is ended, the system automatically operates with the previous settings
used before the powerful operation.
9
STARCPIL
Perform Leave Home operation according to the following control contents.
(1) Operation mode : Heating
(2) Setting temperature : 10
(3) Shift value : + SFTLVHM
(4) Indoor fan speed : FWH_P
(5) Outdoor fan speed :
(6) Compressor start control： Same as Basic Heating operation
(7) Compressor speed :
(8) Operation lamp : ON
36
Same as Basic
Heating operation