T9K5 SAFETY STATEMENTS PREFACE THIS STATEMENT IS USED WHERE SERIOUS INJURY OR DEATH WILL RESULT IF This manual is used to familiarize you with safety, assembly, operation, adjustment, troubleshooting, and THE INSTRUCTIONS ARE NOT FOLLOWED PROPERLY. DANGER maintenance. Read and follow the recommendations in this manual to ensure safe and efficient operation.
• Keep all parts of your body away from the drilling bit when operating the unit. • Keep a first aid kit near by when operating equipment. • DO NOT operate the PRO-DIG Auger Drive when the auger bit is more than 12” (305mm) ®...
Bidirectional Speed OPERATING PROCEDURES Min. Hydraulic Flow 25 GPM Max. Hydraulic Flow 55 GPM OPERATIONS TO AVOID Before operating always ensure that the PRO-DIG Auger Max. Continuous Pressure 2500 PSI ™ Output Shaft ” Hex Drive and auger or anchor are connected correctly to the 1.
• Quick release couplers not engaged. Check connections. • If equipment has been altered in any way from it original design, PRO-DIG ™ does not accept any liability for injury or warranty.
Page 7
T9K5 GUARANTEE AND WARRANTY Goods manufactured, rebuilt, supplied or installed by the Company are warranted against defects in material or work- NOTES: manship by the Company or its supplier for twelve months but the Company may transfer to the customer the benefit of any subsisting guarantee which the Company may hold in respect thereof.