Table of Contents
Related Manuals for Pro-dig T15K
Summary of Contents for Pro-dig T15K
- Page 1 AUGER & ANCHOR DRIVE (TWO SPEED) T15K Instruction Manual Manual number: PROT15K Operating Instructions Owners Manual Maintenance Release Date: September 3, 2011 Safety Precautions Parts Lists 785.856.2661 WWW.PRO-DIG-USA.COM...
-
Page 2: Table Of Contents
T15K PREFACE This manual is used to familiarize you with safety, assembly, operation, adjustment, troubleshooting, and maintenance. Read and follow the recommendations in this manual to ensure safe and efficient operation. The information contained in this manual was current at the time of printing. Some items may change slightly to assure, you the customer, the best performance. -
Page 3: Safety Statements
SAFETY STATEMENTS THIS STATEMENT IS USED WHERE SERIOUS INJURY OR DEATH WILL RESULT IF THE INSTRUCTIONS ARE NOT FOLLOWED PROPERLY. DANGER THIS STATEMENT IS USED WHERE SERIOUS INJURY OR DEATH COULD RESULT IF THE INSTRUCTIONS ARE NOT FOLLOWED PROPERLY. WARNING THIS STATEMENT IS USED WHERE MINOR INJURY COULD RESULT IF THE IN- STRUCTIONS ARE NOT FOLLOWED PROPERLY. -
Page 4: General Precautions
• Replace parts that are cracked, chipped or damaged in any way before operation. • Keep others away when making any adjustments to the unit. • Damage to the PRO-DIG Auger Drive and auger bit can result if the prime mover moves while ®... -
Page 5: Safety Decal Locations/Serial Tag Location
• Inspect the area to be drilled before operation. Remove objects which can be thrown or be- come entangled. • Keep all parts of your body away from the drilling bit when operating the unit. • DO NOT operate the PRO-DIG Auger Drive when the auger bit is more than 12” (305mm) ®... -
Page 6: Specifications/Component And Control Locations
T15K SPECIFICATIONS/COMPONENT AND CONTROL LOCATIONS T15K Motor Mount SAE “C” 4 Bolt Motor 179cc Bidirectional Speed Min. Hydraulic Flow 25 GPM Max. Hydraulic Flow 55 GPM Max. Continuous Pressure 2500 PSI Output Shaft 3” Hex OUTPUT SPEED (LOW SPEED) FLOW... -
Page 7: Set-Up Instructions/Operating Procedures/Storage
This unit comes equipped with all safety decals in place. They are designed to help you safely operate your unit. Read and follow all safety decals. OPERATING PROCEDURES OPERATIONS TO AVOID Before operating always ensure that the PRO-DIG Auger ™ Drive and auger or anchor are connected correctly to the 1. -
Page 8: General Maintenance/Checking And Changing The Gear Oil
™ accessories and other damages as a result of their use. • If equipment has been altered in any way from it original design, PRO-DIG does not accept any liability for injury or warranty. ™... -
Page 9: Maintenance Cont./Troubleshooting
• Clean the exterior and surrounding area near the hydraulic motor. • Paint all scratched or bare metal surfaces. TROUBLESHOOTING In the event your PRO-DIG Auger Drive unit malfunctions or does not appear to have enough speed or power, please refer to ™... -
Page 10: Gearbox Parts Breakdown
T15K WWW.PRO-DIG-USA.COM... - Page 11 785.856.2661...
-
Page 12: Guarantee/Warranty
T15K GUARANTEE AND WARRANTY Goods manufactured, rebuilt, supplied or installed by the Company are warranted against defects in material or work- manship by the Company or its supplier for twelve months but the Company may transfer to the customer the benefit of any subsisting guarantee which the Company may hold in respect thereof. - Page 13 NOTES: 785.856.2661...
- Page 14 T15K NOTES: WWW.PRO-DIG-USA.COM...
- Page 15 NOTES: 785.856.2661...
- Page 16 PROUD MEMBER OF: 1604 ROSEPORT RD ELWOOD, KS 66024 785.856.2661 WWW.PRO-DIG-USA.COM...