Related Manuals for Centre Point CP-R10R
Summary of Contents for Centre Point CP-R10R
- Page 1 C P- R1 0R R O T A R Y L A S E R L E V E L CP-R10R Product Code: 400098 I N S T R U C T I O N M A N U A L...
-
Page 2: Laser Safety
Laser Safety Read the following safety instructions before attempting to operate this tool. Keep these instructions in a safe place or store in the carry pouch for future reference. WARNING! SAVE ALL WARNINGS & INSTRUCTIONS FOR FUTURE REFERENCE. Read and understand all instructions. Use the tool only with the Do not position the tool near a reflective •... -
Page 3: Item Checklist
Item Checklist Please ensure the following items are included with your laser level. If anything is missing please contact your retailer. Centre Point Centre Point CP-DR3 Laser glasses CP-R10R detector & clamp (red) INCHES Laser target AA Alkaline 9V Alkaline battery... -
Page 4: Using The Laser
Using the Laser Protective lighthouse Laser port Battery compartment Control panel 5/8” x 11 tripod thread OVERVIEW Power Tilt alarm Power indicator Tilt alarm indicator I.R sensor CONTROL PANEL... -
Page 5: Power Supply
Using the Laser (continued) POWER SUPPLY OPERATION The instrument is supplied with four AA 1.5V Powering on • alkaline batteries as its main power source. Press the power button once and • the instrument will power on and begin Battery replacement automatically self-levelling. -
Page 6: Using The Detector
Using the Detector LCD display screen Bubble vial Coarse / fine detection Laser sensor Power button Speaker FRONT OVERVIEW LCD display screen Staff clamp thread Battery compartment BACK OVERVIEW... - Page 7 Using the Detector (continued) POWER SUPPLY Speaker function Press the speaker button The detector is supplied with one 9V alkaline • • to turn the speaker off / on. battery as its standard power source. Operation with a rotary laser level Removing &...
-
Page 8: Using The Tripod
Using the Tripod NOT INCLUDED A tripod can be purchased from your NOTE: adjustment methods will vary on nearest measurement tool dealer. The tripod models. Always ensure that any locking below instructions are generic only and levers are unlocked before making adjustments set-up methods may vary between models. -
Page 9: Troubleshooting
Trouble Shooting ERROR / PROBLEM CAUSE / SOLUTION Check the batteries. They may be in the wrong way or need replacing. • Laser level does Check the battery compartment for signs of damage and not power on • ensure that the compartment and battery terminals are clean. Check the batteries. -
Page 10: Warranty
Warranty This tool comes with a standard 3 year warranty. Extend the warranty of your laser level to 7 years by registering online. See website for terms and conditions. www.spoton.com.au/warranty-information All Spot-on measurement tools are carefully checked and tested to our precise quality assurance standards. We offer a warranty in accordance with the following conditions: 1. -
Page 11: Specifications
Specifications SPECIFICATIONS CP-R10R Product code 400098 Warranty 7 Years (with online registration) Accuracy ±1.5mm at 30m Operating range 250m (diameter) Levelling range ±9% / ±5° Maximum rotation speed 600rpm Laser class 2 Red Battery life 20 hours Battery type 4x 1.5V AA... - Page 12 Spot-on Laser & Tool Company Pty Ltd Spot-on Laser & Tool Company Pty Ltd reserves the right to make changes to specifications and product descriptions at any time. © Spot-on Laser & Tool Company Pty Ltd. 2021. Printed in China.