Laser Safety Read the following safety instructions before attempting to operate this tool. Keep these instructions in a safe place or store in the carry pouch for future reference. WARNING! SAVE ALL WARNINGS & INSTRUCTIONS FOR FUTURE REFERENCE. Read and understand all instructions. Use the tool only with the Do not position the tool near a reflective •...
Item Checklist Please ensure the following items are included with your laser level. If anything is missing please contact your retailer. Centre Point Centre Point CP-DR3 Laser glasses CP-R10G detector & clamp (green) INCHES Laser target AA Alkaline 9V Alkaline battery...
Using the Laser Protective lighthouse Laser port Battery compartment Control panel 5/8” x 11 tripod thread OVERVIEW Power Tilt alarm Power indicator Tilt alarm indicator I.R sensor CONTROL PANEL...
Using the Laser (continued) POWER SUPPLY OPERATION The instrument is supplied with four AA 1.5V Powering on • alkaline batteries as its main power source. Press the power button once and • the instrument will power on and begin automatically self-levelling. When this Battery replacement levelling process is complete, the penta Unscrew and remove the battery cover door...
Using the Detector LCD display screen Bubble vial Coarse / fine detection Laser sensor Power button Speaker FRONT OVERVIEW LCD display screen Staff clamp thread Battery compartment BACK OVERVIEW...
Page 7
Using the Detector (continued) POWER SUPPLY Speaker function Press the speaker button The detector is supplied with one 9V alkaline • • to turn the speaker off / on. battery as its standard power source. Operation with a rotary laser level Removing &...
Using the Tripod NOT INCLUDED A tripod can be purchased from your NOTE: adjustment methods will vary on nearest measurement tool dealer. The tripod models. Always ensure that any locking below instructions are generic only and levers are unlocked before making adjustments set-up methods may vary between models.
Trouble Shooting ERROR / PROBLEM CAUSE / SOLUTION Check the batteries. They may be in the wrong way or need replacing. • Laser level does Check the battery compartment for signs of damage and not power on • ensure that the compartment and battery terminals are clean. Check the batteries.
Warranty This tool comes with a standard 3 year warranty. Extend the warranty of your laser level to 7 years by registering online. See website for terms and conditions. www.spoton.com.au/warranty-information All Spot-on measurement tools are carefully checked and tested to our precise quality assurance standards. We offer a warranty in accordance with the following conditions: 1.
Specifications SPECIFICATIONS CP-R10G Product code 400100 Warranty 7 Years (with online registration) Accuracy ±1.5mm at 30m Operating range 250m (diameter) Levelling range ±9% / ±5° Maximum rotation speed 600rpm Laser class 3 Green Battery life 20 hours Battery type 4x 1.5V AA...