ASROCK H310CM-ITX/ac User Manual page 56

Voltage Configuration
DRAM Voltage
Use this to configure DRAM Voltage. The default value is [Auto].
PCH +1.05 Voltage
Configure the chipset voltage.
VCCST Voltage
Configure the voltage for the VCCST.
Save User Default
Type a profile name and press enter to save your settings as user default.
Load User Default
Load previously saved user defaults.
Save User UEFI Setup Profile to Disk
Save current UEFI settings as an user default profile to disk.
Load User UEFI Setup Profile to Disk
Load previously saved user defaults from the disk.
50