Husqvarna Z242F Operator's Manual page 15

Maintenance
Do a check of the safety
system.
Make sure that there are
no fuel or oil leaks from
the product.
Make sure that there are
no damage on the prod-
uct.
Make sure that there are
no loose parts.
Do a check for damages
on the cutting deck.
Do a check of the cutting
deck for adjustment.
Do a check of the tire
pressures.
Do a check of the battery
connections.
Do a check of the throttle
cable.
Do a check of the caster
wheels (each 200 hours).
Do a check of the
clearance of the engine
1
valve.
Clean the air intake of the
2
engine.
Clean the bottom side of
the cutting deck.
Clean around the engine.
Clean around the belts
and the belt pulleys.
Do a check of the belts
and the belt pulleys.
Clean the foam pre-filter.
Replace the foam pre-fil-
45
ter.
1
Must be done by approved service agent.
2
In conditions with dust, cleaning and replacement must be done more frequently.
3
In conditions with dust, cleaning and replacement must be done more frequently.
4
In conditions with dust, cleaning and replacement must be done more frequently.
5
If the product is equipped with the foam pre-filter.
2242 - 001 - 11.08.2023
Daily maintenance
Before After
X
*
*
*
*
X
X
*
*
3
Do maintenance
at a minimum of 1
25
time each year
X
X
X
*
O
X
O
O
Maintenance interval in hours
50 100
X X X
X X X
O
X
O
* *
X
O
300
X
X
X
*
*
15