Exit Without Saving - Supero SUPER P4STA User Manual

Chapter 4: Award BIOS

[Exit without Saving]

If you highlight the letter "Y" and press <Enter> when the above "Exit without
Saving" screen appears, all the changes you've made in the CMOS will not be
saved before you exit the CMOS Setup. Your system should, then, continue
with the boot up procedure.
[Load Fail-Safe Defaults]
When the item "Load Fail Safe Defaults" is highlighted, hit the
<Enter> key to activate the following screen:
When the dialogue box appears in the above screen, press the key "Y" to
load the BIOS Fail-Safe default values for the most stable system operation.
The settings are "Yes" and "No". The default setting is "No".
4-27