Connecting With The Headphones; Information On The Bluetooth Wireless Connection - Teufel REAL BLUE TWS 2 Technical Description And User Manual

3.3 Connecting with
the headphones
1. Opening the charging case for the
first time will automatically start
pairing on the headphones. The
LED's on the headphones will flash
white and blue alternatively.
2. Enable Bluetooth on your device
and search for the "Teufel REAL
BLUE TWS 2". The LED will flash
white once successfully paired.
3. If the headphones have been
paired with another device before,
hold both L and R multipurpose
area for 1.5 seconds. The
headphones will enter pairing
mode and the new device can find
and connect to it.
4. If the headphones have already
been paired to a device, they will
automatically reconnect to that
device. If none of these devices
are available within 60 seconds,
the headphones will enter pairing
mode.
3.4 Information on the
Bluetooth wireless
connection
The headphones are compatible with
Bluetooth 5.2.
If your audio source supports high-
resolution audio encoding methods
SBC, AAC, it will automatically play
high audio quality music.
The paired devices immediately
establish the Bluetooth wireless
connection after switching on and are
ready for use.
When you switch the headphones on,
they automatically try to connect to
the last connected Bluetooth device.
• REAL BLUE TWS 2 13