Table of Contents
Advertisement
16
Remote and
Accessories
16.1
Bluetooth® On or Off
Pair Accessory
Position the Bluetooth® device within 5 meters of the
TV. Read the user manual of the device for specific
information on pairing and on wireless range. Make
sure the Bluetooth® setting on TV is switched on.
Once a Bluetooth® device is paired, you can select it
to play the TV sound. When a device is paired, you do
not need to pair it again unless you remove the
device.
To pair a Bluetooth® device with the TV:
1 - Switch on the Bluetooth® device and place it
within range of the TV.
2 - Select Settings > Remote &
accessories > Pair accessory.
3 - Select Search and press OK. Follow the
instructions on screen. You will pair the device with
the TV and the TV will store the connection. You
might need to unpair a paired device first if the
maximum number of paired devices was reached.
4 - Press (left) repeatedly, if necessary, to close
the menu.
Device Operation
To connect or disconnect a Bluetooth® device:
1 - Select Settings > Remote & accessories.
2 - In the list, select a Bluetooth® device.
3 - Select Connect or Disconnect to connect or
disconnect a Bluetooth® device.
4 - Press (left) repeatedly, if necessary, to close
the menu.
To rename a Bluetooth® device:
1 - Select Settings > Remote & accessories.
2 - In the list, select a Bluetooth® device.
3 - Select Rename to rename a Bluetooth® device.
4 - Press (left) repeatedly, if necessary, to close
the menu.
You can connect or disconnect a wireless Bluetooth®
device. You can also remove a paired Bluetooth®
device. If you remove a Bluetooth® device, the
device will be unpaired.
To remove Bluetooth® device:
1 - Select Settings > Remote & accessories.
2 - In the list, select a Bluetooth® device.
3 - Select Forget to remove the Bluetooth® device.
4 - Press (left) repeatedly, if necessary, to close
the menu.
To view the Bluetooth® device information:
1 - Select Settings > Remote & accessories.
2 - In the list, select a Bluetooth® device.
3 - The Bluetooth® device information is listed on
the bottom.
4 - Press (left) repeatedly, if necessary, to close
the menu.
16.2
Remote Control
Pair Remote Control
Pairing or pairing again
When you start the initial TV installation, the TV
invites you to press the Home + Back key to pair the
remote control. If the pairing with the remote control
is lost, you can pair it again by pressing the Home +
Back key.
Alternatively, go to Settings > Remote &
accessories > Remote control settings > Pair
remote control, then follow the on-screen
instructions.
A message appears when the pairing has been
successful.
Remote Control Info
View the remote control information
Settings > Remote & accessories > Remote
control settings > Remote control info.
You can select Version to check the embedded
software version of the remote control or select
Battery level to see current battery percentage.
49
Advertisement
Table of Contents
