Philips SignageSolutions 98BDL4150D User Manual
  1. Manuals
  2. Brands
  3. Philips Manuals
  4. TV
  5. SignageSolutions 98BDL4150D
  6. User manual

Philips SignageSolutions 98BDL4150D User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
98BDL4150D
V1.00
www.philips.com/welcome
User Manual (English)

Advertisement

Table of Contents
loading

Related Manuals for Philips SignageSolutions 98BDL4150D

Summary of Contents for Philips SignageSolutions 98BDL4150D

  • Page 1 98BDL4150D V1.00 www.philips.com/welcome User Manual (English)
  • Page 2 Operation: • Keep the display out of direct sunlight and away from stoves or any other heat sources. • Remove any object that could fall into ventilation holes or prevent proper cooling of the display’s electronics. • Do not block the ventilation holes on the cabinet. • When positioning the display, make sure the power plug and outlet are easily accessible. • When turning off the display by detaching the power cord, wait 6 seconds before re-attaching the power cord for normal operation. • Ensure the use of an approved power cord provided by Philips at all times. If your power cord is missing, please contact your local service center. • Do not subject the display to severe vibration or high impact conditions during operation. • Do not knock or drop the display during operation or transportation. • The eye bolt is for usage in short-time maintenance and installation. We suggest not to use the eye bolt for more than 1 hour. Prolong usage is prohibited. Please keep a clear safety area under the display while using the eye bolt. Maintenance: • To protect your display from possible damage, do not put excessive pressure on the LCD panel. When moving your display, grasp the frame to lift; do not lift the display by placing your hand or fingers on the LCD panel.
  • Page 3 98BDL4150D Read and follow these instructions when connecting and using your display: • Unplug the display if you are not going to use it for an extensive period of time. • Unplug the display if you need to clean it with a slightly damp cloth. The screen many be wiped with a dry cloth when the power is off. However, never use alcohol, solvents or ammonia-based liquids. • Consult a service technician if the display does not operate normally when you have followed the instructions in this manual. • The casing cover should be opened only by qualified service personnel. • Keep the display out of direct sunlight and away from stoves or any other heat sources. • Remove any object that could fall into the vents or prevent proper cooling of the display’s electronics. • Do not block the ventilation holes on the cabinet. • Keep the display dry. To avoid electric shock, do not expose it to rain or excessive moisture. • When turning off the display by detaching the power cable or DC power cord, wait for 6 seconds before re-attaching the power cable or DC power cord for normal operation..
  • Page 4 98BDL4150D Europe – EU Declaration of Conformity This device complies with the essential requirements of the Radio Equipment Directive (2014/53/EU). The following test methods have been applied in order to prove presumption of conformity with the essential requirements of the Radio Equipment Directive (2014/53/EU): - EN60950-1/EN62311/EN300328/EN301893/EN301489 Europe Statement IMPORTANT NOTE: The device is restricted to indoor use only when operating in the 5150 to 5350MHz frequency range. Radiation Exposure Statement: T his equipment complies with CE radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & body. The frequency, mode and the maximum transmitted power in EU are listed below: 2412-2472MHz(802.11g 6Mbps): 19.98dBm 2402-2480MHz (EDR 3Mbps): 9.65dBm 2402-2480MHz (LE 1Mbps): 9.80dBm 5180-5240/5260-5320/5500-5700MHz (802.11 ac VHT40 MCS0/NSS1): 22.95dBm Taiwan: 低功率電波輻射性電機管理辦法...
  • Page 5 98BDL4150D - Consult the dealer or an experienced radio/TV technician for help. F CC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Operations in the 5GHz products are restricted to indoor usage only. Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. Canada: Industry Canada statement: This device complies with RSS-247 of the Industry Canada Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Ce dispositif est conforme à la norme CNR-247 d’Industrie Canada applicable aux appareils radio exempts de licence. Son fonctionnement est sujet aux deux conditions suivantes: (1) le dispositif ne doit pas produire de brouillage préjudiciable, et (2) ce dispositif doit accepter tout brouillage reçu, y compris un brouillage susceptible de provoquer un fonctionnement indésirable. Radiation Exposure Statement: This equipment complies with ISED radiation exposure limits set forth for an uncontrolled environment.
  • Page 6 98BDL4150D Polish Center for Testing and Certification Notice The equipment should draw power from a socket with an attached protection circuit (a three-prong socket). All equipment that works together (computer, display, printer, and so on) should have the same power supply source. The phasing conductor of the room’s electrical installation should have a reserve short-circuit protection device in the form of a fuse with a nominal value no larger than 16 amperes (A). To completely switch off the equipment, the power supply cable must be removed from the power supply socket, which should be located near the equipment and easily accessible. A protection mark “B” confirms that the equipment is in compliance with the protection usage requirements of standards PN-93/T-42107 and PN-89/ E-06251. Electric, Magnetic and Electromagnetic Fields (“EMF”) 1. We manufacture and sell many products targeted at consumers, which, like any electronic apparatus, in general have the ability to emit and receive electromagnetic signals.
  • Page 7 98BDL4150D Information for U.K. only WARNING - THIS APPLIANCE MUST BE EARTHED. Important: This apparatus is supplied with an approved moulded 13A plug. To change a fuse in this type of plug proceed as follows:+ 1. Remove fuse cover and fuse. 2. Fit new fuse which should be a BS 1362 5A,A.S.T.A. or BSI approved type. 3. Refit the fuse cover. If the fitted plug is not suitable for your socket outlets, it should be cut off and an appropriate 3-pin plug fitted in its place. If the mains plug contains a fuse, this should have a value of 5A. If a plug without a fuse is used, the fuse at the distribution board should not be greater than 5A. NOTE: T he severed plug must be destroyed to avoid a possible shock hazard should it be inserted into a 13A socket elsewhere.
  • Page 8 98BDL4150D China RoHS 根据中国大陆《电子电气产品有害物质限制使用标识要求》，以下部分列出了本产品中可能包含的有害物 质的名称和含量。 有害物质 部件名称 铅 汞 镉 六价铬 多溴联苯 多溴二苯醚 (Pb) (Hg) (Cd) (Cr (VI)) (PBB) (PBDE) 外壳 ○ ○ ○ ○ ○ ○ 液晶显示屏/灯管 × × ○ ○ ○ ○ 电路板组件* × ○ ○ ○ ○ ○...
  • Page 9 98BDL4150D 《废弃电器电子产品回收处理管理条例》提示性说明 为了更好地关爱及保护地球，当用户不再需要此产品或产品寿命终止时，请遵守国家废弃电器电子产品 回收处理相关法律法规，将其交给当地具有国家认可的回收处理资质的厂商进行回收处理。 限用物質及其化學符號 單元 鉛 汞 鎘 六價鉻 多溴聯苯 多溴二苯醚 (Pb) (Hg) (Cd) (PBB) (PBDE) 塑料外框 ○ ○ ○ ○ ○ ○ 後殼 ○ ○ ○ ○ ○ ○ 液晶面板 － ○ ○ ○ ○ ○ 電路板組件 － ○...
  • Page 10 98BDL4150D End-of-Life Disposal Your new Public Information Display contains materials that can be recycled and reused. Specialized companies can recycle your product to increase the amount of reusable materials and to minimize the amount to be disposed of. Please find out about the local regulations on how to dispose of your old display from your local Philips dealer. (For customers in Canada and U.S.A.) This product may contain lead and/or mercury. Dispose of in accordance to local-state and federal regulations. For additional information on recycling contact www.eia.org (Consumer Education Initiative) Waste Electrical and Electronic Equipment-WEEE Attention users in European Union private households This marking on the product or on its packaging illustrates that, under European Directive 2012/19/EU governing used electrical and electronic appliances, this product may not be disposed of with normal household waste. You are responsible for disposal of this equipment through a designated waste electrical and electronic equipment collection.
  • Page 11 98BDL4150D Batteries For EU: The crossed-out wheeled bin implies that used batteries should not be put to the general household waste! There is a separate collection system for used batteries, to allow proper treatment and recycling in accordance with legislation. Please contact your local authority for details on the collection and recycling schemes. For Switzerland: The used battery is to be returned to the selling point. For other non-EU countries: Please contact your local authority for correct method of disposal of the used battery. According to EU directive 2006/66/EC, the battery can’t be disposed improperly. The battery shall be separated to collect by local service. Após o uso, as pilhas e/ou baterias deverão ser entregues ao estabelecimento comercial ou...

  • Page 12: Table Of Contents

    98BDL4150D Table Of Contents OSD Menu ................44 6.1. Navigating the OSD Menu ..........44 6.2. OSD Menu Overview ............44 Unpacking and Installation ............1 Supported Media Formats ............ 53 1.1. Transportation and Unpacking..........1 1.2. Package Contents ................4 Input Mode ................55 1.3. Installation Notes .................4 Pixel Defect Policy ..............57 1.4.

  • Page 13: Unpacking And Installation

    98BDL4150D Unpacking and Installation 1.1. Transportation and Unpacking Notice for transportation • Always keep the carton in vertical direction. Any other directions are not allowed. • No any other objects could be placed on the carton. • Don’t impact the carton. • Move the carton by stacker. • Don’t tip over the carton. • Move single carton with small pallet by stacker. Carton Small Pallet Big Pallet...
  • Page 14 98BDL4150D Notice for transportation 1. Remove the strap around the carton. 2. Use blade to cut the tape on the top, and open the carton. 3. Take out the accessory box. 4. Take out the top and front cushions carefully. 5. Remove the plastic carton lockers and remove the top carton.
  • Page 15 98BDL4150D 6. With the help of another person to move the display out of the bottom carton. • Do not touch the screen of display. Please use the handles • Keep vertical direction when moving the display. to move the display. 90° 90° • Do not let the edge of display to touch the hard surface such as floor or table.

  • Page 16: Package Contents

    98BDL4150D Before install the display • This product is packed in a carton, together with the standard accessories. • Any other optional accessories will be packed separately. • Due to the size and weight of this display it is recommended for two people to move it. • After opening the carton, ensure that the contents are complete and in good condition. 1.2. Package Contents Please verify that you received the following items with your package content: • LCD display NORMAL • Quick start guide FORMAT SOURCE LIST INFO • Remote control with AAA batteries ADJUST OPTIONS • Power cord • RS232 cable ID SET ENTER Quick start guide Remote Control...

  • Page 17: Mounting On A Wall

    98BDL4150D 1.4. Mounting on a Wall To mount this display to a wall, you will have to obtain a standard wall-mounting kit (commercially available). We recommend using a mounting interface that complies with TUV-GS and/or UL1678 standard in North America. Protective Sheet VESA Grid Table 1. Lay a protective sheet on a table, which was wrapped around the display when it was packaged, beneath the screen surface so as not to scratch the screen face. 2. Ensure you have all accessories for mounting this display (wall mount, ceiling mount, table stand, etc). 3. Follow the instructions that come with the base mounting kit. Failure to follow correct mounting procedures could result in damage to the equipment or injury to the user or installer. Product warranty does not cover damage caused by improper installation. 4.

  • Page 18: Mounting In Portrait Position

    98BDL4150D 1.5. Mounting in Portrait Position This display can be installed in portrait position. 1. Remove the table stand, if attached. 2. Rotate 90 degrees clockwise . The “ ” logo should be on the left side when facing the display. 1.5.1. How to use the logo guider for portrait position 1. Put the guider on the lower-left corner of the front bezel of the display. Fold down both of its edges. 2. Peel off the protective film at the back of the “ ” logo sticker. Hold and press the guider with your left hand. Put the “ ” logo sticker with its adhesive side down into the logo hole with your right hand, and press to make it stick tightly onto the front bezel.

  • Page 19: Parts And Functions

    98BDL4150D Parts and Functions 2.1. Control Panel MUTE INPUT MENU [ ] button Remote control sensor and power status indicator Use this button to turn the display on or put the display to standby. • Receives command signals from the remote control. • Indicates the operating status of the display without OPS: [MUTE] button - Lights green when the display is turned on Switch the audio mute ON/OFF. - Lights red when the display is in standby mode [INPUT] button - When {SCHEDULE} is enabled, the light blinks green and red Choose the input source. - If the light blinks red, it indicates that a failure has been [ ] button detected - Lights off when the main power of the display is turned off...

  • Page 20: Input/Output Terminals

    98BDL4150D 2.2. Input/Output Terminals RS232 RS232 HDMI2 IN HDMI3 IN DVI IN HDMI1 IN AC IN SPEAKER SWITCH AC power input from the wall outlet. Internal speaker on/off switch. MAIN POWER SWITCH SPEAKERS OUT Switch the main power on/off. Audio output to external speakers. HDMI1 IN / HDMI2 IN / HDMI3 IN USB SERVICE PORT HDMI video/audio input. Connect to USB storage for main board Firmware update. NOTE: It’s for updating firmware only.
  • Page 21 98BDL4150D 2.2.1. Inserting the batteries in the remote control The remote control is powered by two 1.5V AAA batteries. To install or replace batteries: 1. Press and then slide the cover to open it. 2. Align the batteries according to the (+) and (–) indications inside the battery compartment. 3. Replace the cover. Caution: The incorrect use of batteries can result in leaks or bursting. Be sure to follow these instructions: • Place “AAA” batteries matching the (+) and (–) signs on each battery to the (+) and (–) signs of the battery compartment. • Do not mix battery types. • Do not combine new batteries with used ones. It causes shorter life or leakage of batteries. • Remove the dead batteries immediately to prevent them from liquid leaking in the battery compartment. Don’t touch exposed battery acid, as it can damage your skin. NOTE: I f you do not intend to use the remote control for a long period, remove the batteries.

  • Page 22: Remote Control

    98BDL4150D 2.3. Remote Control ] LIST button No function. 2.3.1. General functions NAVIGATION buttons Root Menu: Go to Smart picture OSD. Main Menu: Move the highlight bar up to adjust the selected item. IR Daisy Chain Menu: Increase controlled Group ID number. Root Menu: Go to Audio source OSD. Main Menu: Move the highlight bar down to adjust the selected item. IR Daisy Chain Menu: Decrease controlled Group ID number. Main Menu: go to previous level menu.
  • Page 23 98BDL4150D 2.3.2. ID Remote Control Press [ID] button. The red LED blinks twice. 1. Press [ID SET] button for more than 1 second to enter the ID You can set the remote control ID when you want to use this remote Mode. The red LED lights up. control on one of several different displays. Press the [ID SET] button again will exit the ID Mode. The red LED lights off. Press the digit numbers [0] ~ [9] to select the display you want to control. For example: press [0] and [1] for display No.1, press [1] and [1] for display No.11. The numbers available are from [01] ~ [255]. 2. Not pressing any button within 10 seconds will exit the ID Mode. 3. If an error pressing of buttons other than the digits occured, wait 1 second after the red LED lights off and then lights up again, then press the correct digits again.
  • Page 24 5. All media or pdf files should be put at the folder, which is named “philips” with sub-folder, under the root directory of the specified storage (internal/USB/SD Card). All sub-folders (video/photo/music/ pdf) are named by media types and shouldn’t be changed. videos: {root dir of storage}/philips/video/ photos: {root dir of storage}/philips/photo/ music : {root dir of storage}/philips/music/ pdfs : {root dir of storage}/philips/pdf/ Note that the root directories of three storages are Internal storage: /sdcard USB storage: /mnt/usb_storage...
  • Page 25 98BDL4150D » when zoom in/out has been not performed, [ ] [ ] VOLUME button Adjust volume. The buttons are only controlled by Scalar. Press to go to the next page. Press to go to the previous page. ] button Confirm an entry or selection. [ ] ADJUST button 1. In the content of the web page, move the focus down to the next clickable items. 2. Move the focus down to the next control or widget such as buttons. ] MUTE button Press to turn the mute function on/off. The button is only controlled by Scalar. ] COLOR buttons 1.

  • Page 26: Sd Card Cover

    98BDL4150D 2.4. SD card Cover • Use the SD card cover and screws to hide the Micro SD card.

  • Page 27: Connecting External Equipment

    98BDL4150D Connecting External Equipment 3.1. Connecting External Equipment (DVD/VCR/VCD) 3.1.1. Using HDMI video input DVD / VCR / VCD HDMI Out HDMI1 IN HDMI2 IN HDMI3 IN [HDMI IN] 3.2. Connecting a PC 3.2.1. Using VGA input [VGA AUDIO IN] Audio Out AUDIO OUT AUDIO IN...

  • Page 28: Connecting Audio Equipment

    98BDL4150D 3.2.3. Using HDMI input HDMI1 IN HDMI2 IN HDMI3 IN HDMI Out [HDMI IN] 3.2.4. Using DisplayPort input DisplayPort Out [DisplayPort IN] DP IN 3.3. Connecting Audio Equipment 3.3.1. Connecting external speakers EXT. SPK TERMINAL External speakers...

  • Page 29: Connecting Multiple Displays In A Daisy-Chain Configuration

    98BDL4150D 3.3.2. Connecting an external audio device Audio In [AUDIO OUT] SPEAKER SWITCH AUDIO OUT Stereo Amplifier AUDIO IN SPDIF [SPDIF OUT] 3.4. Connecting Multiple Displays in a Daisy-chain Configuration You can interconnect multiple displays to create a daisy-chain configuration for applications such as a menu board. 3.4.1. Display control connection Connect the [RS232 OUT] connector of DISPLAY 1 to the [RS232 IN] connector of DISPLAY 2. DISPLAY 1 DISPLAY 2 [RS-232C] [RS-232C IN] [RS-232C OUT]...

  • Page 30: Ir Connection

    98BDL4150D 3.4.2. Digital video connection Connect the [DP OUT] connector of DISPLAY 1 to the [DP IN] connector of DISPLAY 2. DISPLAY 1 DISPLAY 2 [DP] [DP IN] [DP OUT] [DP IN] 3.5. IR connection External IR Receiver DISPLAY 1 DISPLAY 2 [IR IN] [IR IN] [IR OUT] DISPLAY 1 DISPLAY 2 [RS-232C OUT] [RS-232C IN] NOTE: 1.

  • Page 31: Ir Pass-Through Connection

    98BDL4150D 3.6. IR Pass-through Connection [IR OUT] DVD / VCR / VCD [IR IN] (DVD / VCR / VCD) Remote Control...

  • Page 32: Operation

    98BDL4150D Operation • Admin mode will show five icons: “Settings”, “Apps”, “Network” “Storage” and “Help”. NOTE: T he control button described in this section is mainly on the • When you leave admin mode, system will return to last source. remote control unless specified otherwise. Home page of admin mode, this page has five items: “Settings”, “Apps”, “Network” “Storage” and “Help”. 4.1. Watch the Connected Video Source Settings : go to settings page. 1. Press [ ] SOURCE button.
  • Page 33 98BDL4150D 3 ） Network page 6) Storage page: 7) Help page: Display QRcode page.

  • Page 34: Media Player

    ■ 1 - 7 : go to media player and playback File1 - File7 of playlist automatically. 3. Select “Compose” on home page, first you should choose one - Clear all playlist to edit between FILE 1 and FILE 7. The pencil icon means the playlist is non-empty. 4. If an empty playlist is chosen, the app will guide you to select the media source. All media files should be placed in /philips/ of root directory. For example, videos: {root dir of storage}/philips/video/ photos: {root dir of storage}/philips/photo/ music : {root dir of storage}/philips/music/...
  • Page 35 98BDL4150D 7. If you choose “Sort” in the slide bar, you can change the order of files one by one. 5. You could edit or delete a non-empty playlist, just choose the desired playlist which is with pencil icon. 8. Press info key after you choose desired file, you will get the detail information. 6. Once you start to edit a playlist, you will see below screen. Source - files in storage. 9. Press play key after you choose desired file, you will play the media Playlist – files in playlist. file directly. There are 4 icons which map to the keys of remote controller. Option key – launch slidebar Play key – play media file. Info key – show media info. Ok key – select/unselect file. 6-1 In the slide bar, it helps you to do the following: - select all : select all storage files.
  • Page 36 Ex. mpplaylist1.txt, mpplaylist2.txt - Content : Note : if playlist file contains video and music, when the pd plays music file, the screen will be black. Step 2. Copy mpplaylistX.txt to “philips” folder of internal storage. You may use FTP to do this. - File path : /storage/emulated/legacy/philips Ex. /storage/emulated/legacy/philips/mpplaylist1.txt Step 3. Prepare media files to “photo”, “video” and “music” folder under “philips” folder, internal storage only. - Ex. /storage/emulated/legacy/philips/photo/xxx.jpg /storage/emulated/legacy/philips/video/yyy.mp4 /storage/emulated/legacy/philips/photo/zzz.mp3...

  • Page 37: Browser Manual

    98BDL4150D 4.5. Browser manual 4. Press “Option” then left side will pop up a list Import : Import url list file 1. Home page of Browser app, this page has one item: “Settings”. Export : Export url list file Press Settings then enter next page. Delete all : Delete all url record on right side Back : left side list will be closed. 2. U sers can choose 1~7. Press any one will show a dialog. 4.1 Import • Click import 3. Enter url and press OK then data will save on List • Choose storage • Choose file contains urls...
  • Page 38 98BDL4150D • Import file and url will show on list • Dialog shows path file will be saved and file’s name. Press “save” button then urls on list will be saved. • File format for import Format should be like below with file extension “txt” 5. Press OK then url records will be saved 4.2 Export: • Click export 6. On url list page, if you select non-empty item, it will show a dialog to ask edit or play url. If press “Edit”, it will show edit url dialog, if press “Play”, it will show web page of item’s url. • Choose storage...

  • Page 39: Pdf Player

    1. Home page of PDF Player, this page has three items: “Play”, “Compose” and “Settings”. Play : select playlist to play. Compose: edit playlist. Step 2. Copy bookmarklist.txt to “philips” folder of internal storage. Settings: setting play properties. You may use FTP to do this. - File path : /storage/emulated/legacy/philips (for DL, PL) Ex. /storage/emulated/legacy/philips/bookmarklist.txt Step 3. Start browser app, it will auto import browser text file. PS. Once the playlist file (text) is imported, if an user change playlist by remote controller, this change will not be written to playlist text file.
  • Page 40 - select all : select all storage files. - delete all : delete all playlist files. - add/remove : update playlist from source. - sort : sort playlist. - save/abort : save or abort playlist. - back : return. 4. If an empty playlist is chosen, the app will guide you to select the media source. All media files should be placed in /philips/ of root directory. For example, pdfs : {root dir of storage}/philips/pdf/ 7. If you choose “Sort” in the slide bar, you can change the order of files one by one.
  • Page 41 Step 1. Create pdf player text file. - File name : pdfplaylistX.txt, “X” means playlist number(1,2,3,4,5,6,7). Ex. pdfplaylist1.txt, pdfplaylist2.txt - Content : Step 2. Copy pdfplaylistX.txt to “philips” folder of internal storage. You may use FTP to do this. - File path : /storage/emulated/legacy/philips (for DL, PL) Ex. /storage/emulated/legacy/philips/pdfplaylist1.txt Step 3. Prepare pdf files to “pdf ” folder under “philips” folder, internal storage only. - Ex. /storage/emulated/legacy/philips/pdf/xxx.pdf /storage/emulated/legacy/philips/pdf/yyy.pdf /storage/emulated/legacy/philips/pdf/zzz.pdf Step 4.

  • Page 42: Cmnd & Play

    98BDL4150D 4.7. CMND & Play 1) Server Setup CMND & Play server address 2) Account Setup CMND & Play account 3) PIN Code Setup CMND & Play PIN code (4) Version There are two options, Ver.2 and Ver.3 Ver. 2 use 2.0/2.2 agreement Ver. 3 use 3.0/3.1 agreement (5) Content There are internal storage/SD card/USB storage 3 options for selecting. When Ver.2, Server/Account/PIN code will be gray and unavailable. CMND & Play Settings Server Account PIN Code Version Ver.2 CONTENT Internal storage SD card USB storage...

  • Page 43: Custom App

    98BDL4150D 4.8. Custom App User can set up the application for Customer Source. Note: (1) Only display User Installed app. (2) Will not show up system pre-install app. 4.8.1. OSD Menu operation: RCU: Source -> Custom If set up customer APK, PD will open customer app when switch source to Customer mode. If no set up customer APK, PD will show Black screen when switch source to Customer mode. If customer installed apk,user can select customer installed apk in list • Case 1: Not set up Custom App case. Customer app will show up and focus on first item automatically. 4.8.2. Function Introduction After set up, the setting screen display the app name. • Case 2: Set up Custom App case(there is entity circle to the right of Save icon) Select the App, click the Save will perform the function of storage.

  • Page 44: Setting

    98BDL4150D Setting Note : Ethernet will be disable automatically if Wi-Fi turn on and connect to Main items: network. (1) Wi-Fi (Show up when plug in Wi-Fi dongle) (2) Ethernet 5.3. More (Only show up when 4G module (3) More (Only show up when 4G module connected) connected) (4) Signage Display Via Enable/Disable to control Cellular networks On/OFF. (5) Display Note : (6) Apps 1. Only show up when 4G module connected. (7) Security 2. Only show up “Tethering & portable hotspot” when detect (8) Date & time Wi-Fi module. (9) Developer options 3. Network info will be different due to different carrier. (10) About 5.4. Signage Display (1) General Settings A.
  • Page 45 98BDL4150D Scenario introduction: Case 1 The user don’t select customized boot logo. PD does not find any bootanimation.zip file under SD and USB. The list will be blank. Save and Forget button will be grayed out. 2. Boot Logo 1) Scalar OSD menu to control Android boot logo enable/disable Scalar OSD menu operation RCU: Home -> Configuration2 -> Logo -> On/Off/User In user mode, user can choose their own boot logo animation file. Case 2 Note: The user puts customized bootanimzation.zip file in the SD and USB. (1) Boot animation file name: bootanimation.zip The default priority is SD card , so the PD will automatically select (2) Will pop-up a window for user to select USB and SD card. No the file in the SD card only. The file in the USB drive will be ignored. priority issue. In case the bootanimzation.zip is only in the USB drive, then the PD will select the file in the USB drive (as the SD card has no file).
  • Page 46 3) End Time Set up screenshot End time Note： (1) If no End time, the screen will show current time automatically (2) S tart time cannot be newer than End time. It will show error toast. 4) Repeat Set screenshot repeat cycle. User can choose screenshot time frame. (Multiple selection) 5)Save to Set up screenshot save path, default path: internal storage. Note: In root of internal storage, PD will create folder philips/Screenshot/ automatically. The picture will save to philips/Screenshot/. 6) Purge Screenshots Set up purge timeframe. One day or One week. 7) Send screenshots via email After check this item, it will send screenshot to email of administrator...
  • Page 47 98BDL4150D 5.4.2. Server Settings Gmail safety setting If Gmail is not working when the settings are completed, please test 1. Email Notification the Gmail account via a PC and the below link Via Enable/Disable to control Email On/Off) https://www.google.com/settings/security/lesssecureapps After Enable, user can set up Email notification configuration. And confirm on “Access for less secure apps”the“Turn on” item is Note: The following events are automatically sent mail to manager.) selected. (1) Critical : Some android system warning message (2) Mediaplayer: Playlist is empty, or media file not support… (3) Browser: Playlist is empty.. (4) CMND & Play: No content (5) Pdfplayer: Playlist is empty (6) Ftp: someone login to PD Yahoo Email Security Setting If Yahoo Email is not working when setting complete, please confirm “Allow apps that use less secure sign in” item is enabled.
  • Page 48 98BDL4150D 2. FTP Via Enable/Disable to control FTP On/Off. After set up, PD can share FTP files. 3)Storage Path Show default path: Internal storage Note: 1) Account Can only display Internal storage, cannot be modified. (Only show Set up FTP account path) Note: 4) Port Input limitation Set up FTP port number. (1) Length: 4-20 characters Note: (2) Format: Input limitation I. English a-z and A-Z (1) Length: Max 5 characters II. Number 0-9 (2) Range: 1025 ~ 65535 (3) Format: Number 0-9 (4) Default: 2121...
  • Page 49 (4) Default: 5000 (5) Unavailable port: 9988, 15220, 28123, and 28124. 5.4.4. Network application 1. Proxy Enter the Host and Port of the proxy server. 5.4.5. System Tools System tools 4 main functions: (1) Clear Storage (2) Factory Reset 2. Platform Web API (3) Import & Export Enable / Disable Platform Web API. (4) Clone Media Files (5) External Storage 5.4.5.1 Clear Storage The purpose is to clear all data in Philips folders. Divided into 4 mode: (1) Clear all Philips folders (2) Only clear Philips folder under Internal storage. (3) Only clear Philips folder under USB storage. (4) Only clear Philips folder under SD card. Pop-up the window to display all folders which can be clear.
  • Page 50 98BDL4150D Export Signage Display Settings Will export database to Philips folder under USB or SD card. (1) E xport database (2) Export 3 party apk to Philips/app/ Note: If no Philips folder exists in USB or SD card, it will be created automatically. List all available storage (internal/SD/USB) 5.4.5.2 Factory Reset Factory Reset can recover to Factory default settings. Import Signage Display Settings Import data from Philips folder under USB or SD card. (1) I mport database (2) Auto install 3 party apk from Philips/app/ List all available storage (Internal/SD/USB) Press OK to execute Reset function automatically . Show notification dialog before database import 5.4.5.3 Import & Export The function of Import & Export database and 3rd party apk.
  • Page 51 98BDL4150D 5.4.6. Misc. 5.4.5.4 Clone Media File 5.4.6.1 Tiling tool Clone media file from Internal, SD or USB Philips folder. 1. The cloned folder name under Philips folder To activate the tiling tool function by enter the serial number that buy (1) philips/photo from the dealer. (2) philips/music (3) philips/video (4) philips/cms (5) philips/pdf (6) philips/browser 2. The cloned file extension name is “.cms”) Clone Source (1) Internal storage (a) check FTP (b) check /Philips/ 5.4.6.2 TeamViewer Support (2) SD / USB Enable / Disable TeamViewer support. Files under root Target Location (1) Internal storage Save to /Philips/...

  • Page 52: Display

    98BDL4150D 5.7. Security (2) After selecting update.zip file, system will restart and start updating. (3) If update.zip is not found. The dialog is “no content”. (OK button will (1) Credential storage be grayed.) Control panel of certificates 5.5. Display 5.8. Date & time User can modify the font size, can choose: Small/Normal/Large/Huge Via Scalar OSD menu to control Auto Time On/Off. Note: Add new NTP server to display current server IP . 5.6. Apps Display applications information. Note 5.9. Developer options (1) User options key on RCU to show setting option. Android developer options. For more information please visit https://developer.android.com/index.html...

  • Page 53: 5.10. About

    98BDL4150D 5.10. About 5.11. Supplementary Main info in About: 5.11.1. Quick Info (1) Legal Information: show the open source licenses. (2) Android version You can press “Info + 77” to startup quick info. (3) Kernel version Quick info will show “Network” and “Monitor Information”, as below: (4) Build number Note: Operation hours : It is updated every minute. Heat status : It is updated every 5 seconds. 5.11.2. How to custom an Android boot animation? 1. Overview The Android boot animation is used script to load PNG files when the device boots. It is contained within an uncompressed zip file called bootanimation.zip.
  • Page 54 98BDL4150D - p 1 0 part0 If using WinRAR, set “Compression method” to “Store” - p 0 0 part1 a. The first line 1920 and 1080 define the width and height of the screen resolution. 30 is the frame rate in fps (frames per second) i.e. number of images to display per second. b. The second and third lines have a same format. The first ‘p’ defines play mode is immediately stop playing when boot complete. The number after ‘p’ defines repeat mode - specifying 0 would make the par t loop indefinitely till the device has boot complete. - specifying 1 would make the part playback once.
  • Page 55 1.2 Go to Admin Mode > Apps > File Manager 1.3 Using File Manager and find out your apk and then you can install. Just press “ok” on the selected apk. 2. Download apk by Chromium browser, and then go to <internal storage path>/Download/ by File Manager. 2.1 The rest of steps is the same as above. Please note, each model may have different <internal storage path>. (b) Via Adb Shell 1. Make sure that your PC can connect to Philips Android Signage Display using adb. 2. Prepare your apk in a folder(for example, C:\apkfolder) on PC. 3. Execute the following instruction by command line tool. C:\apkfolder> adb install -r apk_name.apk (c) Via Customized Intent 1. If you develop an apk which can download any android app, then your apk can issue a customized intent. 2. Giving the apk name and the path it was stored. The system will help you to install by program.

  • Page 56: Osd Menu

    98BDL4150D OSD Menu 6.2. OSD Menu Overview An overall view of the On-Screen Display (OSD) structure is shown 6.2.1. Picture menu below. You can use it as a reference for further adjusting your display. 6.1. Navigating the OSD Menu Brightness Picture Contrast Sharpness 6.1.1. Navigating the OSD menu using the Screen Black level remote control Tint Audio FORMAT Color SOURCE Noise reduction Medium Gamma selection...
  • Page 57 98BDL4150D Color control • V position adjustment is functional for VGA input only. You can adjust the color tones of the image precisely by changing the • V position cannot be adjusted when {Pixel Shift} is activated. User-R (Red), User-G (Green) and User-B (Blue) settings independently Clock when the following condition: Adjust the width of the image. {Picture} - {Color temperature} - {User} setting to [User 1] NOTE: T his item is functional for VGA input only. Or, you can adjust the color tones per 100K in the range of 2000K to Clock phase 10000K when the following condition: Adjust to improve the focus, clarity and stability of the image. {Picture} - {Color temperature} - {User} setting to [User 2] NOTE: T his item is functional for VGA input only. Smart picture Zoom mode The following smart picture modes are available for:...
  • Page 58 98BDL4150D 6.2.4. PIP menu H position Moves the horizontal position of the image left or right. Sub mode Picture PIP size Small V position PIP position Bottom-Left Screen Moves the vertical position of the image up or PIP change Cancel down. PIP reset Cancel Audio Screen reset Reset all settings in the Screen menu to factory preset values. Configuration 1 6.2.3. Audio menu   Sub mode ...
  • Page 59 98BDL4150D Panel saving • The PIP function is available only for certain signal source combinations as shown in the table below. Choose to enable the panel saving functions and thus reduce the risk of “image persistence” or “ghost-imaging”. Main • {Cooling Fan} - Choose to adjust the cooling fan’s speed of Sub rotation. Select {Auto} to turn on/off the cooling fan according to the display’s temperature. Choose from: {Auto} / {Off} / {Low} / {Medium} / {High}. HDMI1 NOTES: • The default {Auto} option will start running the cooling fan if HDMI2 the temperature of 45°C (113°F) is reached, and stop running HDMI3 the cooling fan if the temperature of 43°C (109°F). COMP VIDEO • A temperature-warning message will be shown on the screen if the temperature reaches 58°C (136°F). All key functions except BROWSER [ ] key will then be disabled.
  • Page 60 98BDL4150D 6.2.6. Configuration2 menu Tiling matrix number range is between 1 to 15. 1 is default setting. The {Auto ID} setup function enables setting up {Monitor ID} of connected machine according to {Tiling matrix} settings.       Example: Tiling matrix sets as 4                     ...
  • Page 61 98BDL4150D Power LED light • {Unlock} - Enable the keyboard function. Choose to control the power LED. • {Lock All} / {Lock all but Volume} / {Lock all but Power} - Disable the keyboard function. The options are: {Off} / {On} (default). NOTE: T o enable or disable the keyboard control lock, press both [ Configuration2 reset ] and [ ] buttons and hold down continuously for more than Reset all settings in Configuration2 menu to the factory preset values. 3 seconds. Tiling 6.2.7. Advanced option menu With this function you can create a single large-screen matrix (video wall) that consists of up to 150 sets of this display (up to 10-sets on the Input resolution Auto vertical and 15-sets on the horizontal sides).
  • Page 62 98BDL4150D Frame comp. - No • {Daylight saving stop date} - Select {1st / 2nd / 3rd / 4th / last} Sunday of the month {Jan ~ Dec}. • {Correction time} - The options are: {0.5 / 1.0 / 1.5 / 2.0} • {Daylight saving correction} Select {On} to enable this function. Off Timer Set the display to turn itself off to standby mode within an amount of time specified. The options are: {Off, 1 ~ 24} hours from current time. NOTE: W hen the “Off timer” is activated, the “Schedule” settings will be disabled.
  • Page 63 98BDL4150D OPS settings Date schedule: Press [ ] button to select which day in a week this schedule item will be take effect, and then press the Set the OPS configuration under each power condition. [OK] button. • {Auto} - After selecting {Card OPS} for video source input, the OPS will be set to off when the display power is set to off, or set to 4. For additional schedule settings, press [ ], then repeat the steps on when the display power is set to on. When set to other video above. A check mark in the box next to the number of the schedule source inputs, the OPS will always be set to on. item indicates that the selected schedule is in effect. • {Always off} - The OPS will always be set to off. NOTES: • {Always on} - The OPS will always be set to on.
  • Page 64 98BDL4150D Sub 1 Select the input signal for the sub Win1 picture. Choose from: {Displayport} / {DVI-D} / {VGA} / {HDMI1} / {HDMI2} / {HDMI3} / {Media Player} / {BROWSER} / {SmartCMS} / {PDF Player} / {Custom} / {Card OPS}. Sub 2 Select the input signal for the sub Win2 picture. Choose from: {Displayport} / {DVI-D} / {VGA} / {HDMI1} / {HDMI2} / {HDMI3} / {Media Player} / {BROWSER} / {SmartCMS} / {PDF Player} / {Custom} / {Card OPS}.

  • Page 65: Supported Media Formats

    98BDL4150D Supported Media Formats USB Multimedia Codec Formats Video Decode Type Video Codec Container Decode Encode Channel Remark MPEG program stream (.DAT, .VOB, .MPG, .MPEG) MPEG transport stream (.ts) Max Resolution: 1080P@60fps MPEG1/2 MPEG1/2 MP4 (.mp4) Max Bit Rats : 40Mbps AVI (.avi) MKV (.mkv) MP4 (.mp4) Max Resolution: 1080P@60fps MPEG-4 MPEG4 AVI (.avi)
  • Page 66 98BDL4150D Image Decode Type Image Codec Photo Decode Encode Channel Remark Max Resolution: 7000 x 7000 JPEG JFIF file format 1.02 File Format: JPG, JPEG The limitation of max resolution depends on DRAM Max Resolution: 15360 x 8640 File Format: BMP The limitation of max resolution depends on DRAM Max Resolution: 15360 x 8640 File Format: PNG The limitation of max resolution depends on DRAM NOTES: • Sound or video may not work if the contents have a standard bit rate/frame rate above the compatible Frame/sec listed in the table above. • Video content with a Bit rate or Frame rate larger than the rate specified in the table above can cause choppy video during playback.

  • Page 67: Input Mode

    98BDL4150D Input Mode VGA/DVI timing support: Item Mode Resolution H.Freq. (KHz) V.Freq. (Hz) IBM VGA 10H 640x350 31.469 70.086 IBM VGA 12H 640x480 31.469 59.94 MACINTOSH 640x480 66.67 VESA 640x480 37.861 72.809 VESA 640x480 37.5 IBM VGA 3H 720x400 31.469 70.087 VESA 800x600 35.156 56.25 VESA 800x600...
  • Page 68 98BDL4150D 4K2K Item Resolution H.Freq. (KHz) V.Freq. (Hz) 3840x2160 53.946 23.900 3840x2160 24.000 3840x2160 56.25 25.000 3840x2160 67.432 29.900 3840x2160 67.5 30.000 4096x2160 24.000 3840x2160 60.000 Video Timing support(HDMI/DVD HD/DVI) Item Mode Resolution Comment 60Hz 480i except DVI 480p 720p 1080i 1080p 4Kx2K except DVI 50Hz...

  • Page 69: Pixel Defect Policy

    We strive to deliver the highest quality products and use some of the industry’s most advanced manufacturing processes whilst practicing stringent quality control. However, pixel or sub-pixel defects on the PDP / TFT panels used in Plasma- & LCD- displays are sometimes unavoidable. No manufacturer can guarantee that all panels will be free from pixel defects, but Philips guarantees that any Plasma- & LCD- displays with an unacceptable number of defects will be repaired during the warranty period in line with your local guarantee conditions. This notice explains the different types of pixel defects and defines the acceptable defect level for the LCD screen. In order to qualify for repair under warranty, the number of pixel defects must exceed a certain level as shown in the reference table. If the LCD screen is within specification a warranty exchange / claim back will be refused. Additionally, because some types or combinations of pixel defects are more noticeable than others, Philips sets even higher quality standards for those. 9.1. Pixels and Sub-Pixels A pixel, or picture element, is composed of three sub-pixels in the primary colors of red, green and subpixel blue.

  • Page 70: Dark Dot Defects

    Dark Dot Defects Black dot defects appear as pixels or sub-pixels that are always dark or “off ”. These are the examples of black dot defects: One dark dot Two adjacent dark dots = 1 pair of dark dots Two dark dots, specifications defines the minimum distance between dark dots 9.5. Proximity of Pixel Defects Because pixel and sub-pixels defects of the same type that are nearby one another may be more noticeable, Philips also specifies tolerances for the proximity of pixel defects. In the table below you can find specifications about: • Allowed amount of adjacent dark dots = (adjacent dark dots =1 pair of dark dots) • Minimum distance between dark dots • Total no. of all defective dots 9.6. Pixel Defect Tolerances In order to qualify for repair due to pixel defects during the warranty period, a PDP / TFT panel in a Philips Plasma / LCD- display must have pixel or sub- pixel defects exceeding the tolerances listed in the following table.

  • Page 71: Cleaning And Troubleshooting

    98BDL4150D Cleaning and Troubleshooting 10.1. Cleaning Caution When Using the Display • Do not bring your hands, face or objects close to the ventilation holes of the display. The top of the display is usually very hot due to the high temperature of exhaust air being released through the ventilation holes. Burns or personal injuries may occur if any body parts are brought too close. Placing any object near the top of the display could also result in heat related damage to the object as well as the display itself. • Be sure to disconnect all cables before moving the display. Moving the display with its cables attached may damage the cables and thus cause fire or electric shock. • Disconnect the power plug from the wall outlet as a safety precaution before carrying out any type of cleaning or maintenance procedure. Front Panel Cleaning Instructions • The front of the display has been specially treated. Wipe the surface gently using only a cleaning cloth or a soft, lint-free cloth. • If the surface becomes dirty, soak a soft, lint-free cloth in a mild detergent solution.

  • Page 72: 10.2. Troubleshooting

    98BDL4150D 10.2. Troubleshooting Symptom Possible Cause Remedy No picture is displayed 1. The power cord is disconnected. 1. Plug in the power cord. 2. The main power switch on the back of the 2. Make sure the power switch is switched on. display is not switched on. 3. Connect a signal connection to the display. 3. The selected input has no connection. 4. The display is in standby mode. Interference displayed on the display or audible Caused by surrounding electrical appliances or Move the display to another location to see is the noise is heard...
  • Page 73 98BDL4150D How to setup the settings in the menu to Daisy chained by RS232 and no IR cable 1. The first display sets as “Primary” on OSD control all the monitors at the same time and (Advanced option/IR control item), others set as individually via RC? “Secondary”. 2. The setup OSD will show on Top-Left of display. (Toggle MENU will show again if it disappear) 3. Default setting: ID NO: 0, GP NO: 0, this setting can control all displays by IR.

  • Page 74: Technical Specifications

    98BDL4150D Technical Specifications Display: Item Specifications Screen Size (Active Area) 247.7 cm / 97.5 inches Aspect Ratio 16:9 Number of pixels 3840 (H) x 2160 (V) Pixel pitch 0.5622 (H) x 0.5622 (V) [mm] Displayable colors 10 bits(D), 1.06 Billion colors Brightness (typical) 500 cd/m Contrast ratio (typical) 1300:1 Viewing angle 178 degrees In/Out Terminals: Item Specifications Speaker Output Internal Speakers 10W (L) + 10W (R) [RMS]/8Ω 82 dB/W/M/160 Hz ~ 13 KHz SPDIF Output SPDIF Port Serial digital audio output when input is HDMI Audio Output 3.5mm phone jack x 1 0.5V [rms] (Normal) / 2 Channel (L+R) Audio Input 3.5mm phone jack x 1 0.5V [rms] (Normal) / 2 Channel (L+R) RS232C 3.5mm phone jack x 3...
  • Page 75 98BDL4150D General: Item Specifications Power Input 100 - 240V~, 50 - 60Hz, 8.0A Power Consumption (Max) 715 W Power Consumption (typ.) 520 W Power Consumption (Standby & Off) <0.5 W Dimensions (Without Stand) [W x H x D] 2193.2 x 1248.2 x 88.3 mm Weight (Without Stand) 91.4 Kg Gross Weight (Without Stand) 134.5 Kg Product Fiche : Item Specifications Energy Efficiency Class Visible Screen Size 247.7 cm / 97.5 inches On Mode Power Consumption (W) 372 W Annual Energy Consumption (kWh) 544 kWh Standby Power Consumption (W) 0.50 W Off Mode Power Consumption (W) 0.50 W Display Resolution (Pixels) 3840 x 2160 Network Standby (W) Environmental Condition: Item...
  • Page 76 2018 © Koninklijke Philips N.V. All rights reserved. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used under license from Koninklijke Philips N.V. Specifications are subject to change without notice.

Table of Contents