Table of Contents
Advertisement
4
Switching On and
Off
4.1
On or Standby
Make sure the TV is connected to the mains AC
power. Connect the supplied power cord to
the AC IN connector at the back of the TV. The
indicator light at the bottom of the TV lights up.
Switch on
Press
on the remote control to switch the TV on.
You can also press the small joystick button on the
bottom of the TV to turn the TV on in case you can't
find the remote control or its batteries are dead.
Reboot
Long press
on the remote control for 3 seconds
to reboot the TV.
Switch to standby
To switch the TV to standby, press
control. You can also press the small joystick button
on the bottom of the TV.
In standby mode, the TV is still connected to the
mains power but consumes very little energy.
To turn off the TV completely, disconnect the power
plug.
When disconnecting the power plug, always pull the
power plug, never the cord. Ensure that you have full
access to the power plug, power cord and outlet
socket at all times.
on the remote
11
4.2
Keys on TV
If you lost the remote control or its batteries are
empty, you can still do some basic TV operations.
To open the basic menu:
1 - With the TV switched on, press the joystick key on
the bottom of the TV to open the basic menu.
2 - Press left or right to select Volume,
Channel or Sources. Select Demo to start
a demo movie.
3 - Press up or down to adjust the volume or tune to
the next or previous channel. Press up or down to go
through the list of sources, including tuner selection.
Press the joystick key to start the demo movie.
4 - The menu will disappear automatically.
To switch the TV to standby, select and press the
joystick key.
Advertisement
Table of Contents
