Improvising With The Preset Patterns - Casio LK-130 User Manual

IMPORTANT!
• If you play one or two notes only in the left hand, or three
notes that do not make up a recognizable chord formation,
no sound will be produced. The FINGERED mode requires
a conventional three or four-note chord formation to
produce an auto-accompaniment. Also, note that auto-
chords only work in conjunction with rhythm patterns, and
not independently of them.
❚ NOTE
• The above examples show only one of the possible fingerings
for each chord. Note that you can play the notes that form a
chord in any combination. Each of the following fingerings for
example, produces the same C chord.
Accompaniment
keyboard
• See the "Fingered Chord Charts" on page A-3 for
information on the fingerings of chords for all roots.
To play a FINGERED auto-accompaniment
1.
Use the POWER/MODE selector to select
FINGERED.
2.
Select an auto-rhythm as described under "To
select and play a rhythm" on page E-17.
3.
Start play of the rhythm.
• If you want to start play of the normal rhythm pattern,
press START/STOP.
• You can also use synchro start (on this page) to start
rhythm play.
4.
Play a chord on the accompaniment keyboard
to start play of the auto-accompaniment.
Chord name
5.
Continue pressing keys on the accompaniment
keyboard to play your chord progression.
6.
To stop auto-accompaniment play, press the
START/STOP button again.

Improvising with the preset patterns

Pressing the START/STOP button to start rhythm play causes
the normal version of the pattern to be played. You can also
play a variation of the rhythm using the operation described
below.
Using fill-in rhythm
You can insert a fill-in rhythm by pressing the SYNCHRO/
FILL-IN button while an auto-rhythm plays.
Using Synchro start
You can start the rhythm and accompaniment pattern at the
same time, with your play of the accompaniment keyboard.
To do this, follow the steps below.
1.
Set the POWER/MODE selector to the CASIO
CHORD or FINGERED position.
2.
Select an auto-rhythm.
3.
Press the SYNCHRO/FILL-IN button.
4.
Press the accompaniment keys to play the first
chord. As soon as you do, the auto-
accompaniment pattern begins to play.
5.
To stop the auto-accompaniment pattern play,
press the START/STOP button.
❚ NOTE
• If you set the POWER/MODE selector to NORMAL in step 1 on
page E-17, the operation in step 4 starts play of the rhythm
(percussion instruments) only.
E-19