Specifications; Warranty - EMG 85-7X Installation Information

Hide thumbs

page of 5

/ 5
Bookmarks

INSTALLATION INFORMATION

EMG MODELS: 60-7X, 81-7X, 85-7X

SPECIFICATIONS:

Logo Color

Magnet Type *

Resonant Frequency (KHz)

Output Voltage (String)

Output Voltage (Strum)

Output Noise (60 Hz)

Output Impedance (Kohm)

Current @9V (Microamps)

Battery Life (Hours)

Maximum Supply (Volts DC)

*Note: Magnet Type: A (Alnico) A/S (Alnico/Steel) C (Ceramic) C/S (Ceramic/Steel)

Installation notes:

EMG-X Series Pickups are compatible with all EMG Active Pickups. They use the connector system for easy installation, avoiding the need to solder.

Older EMG Pickups may need to be soldered, while the newer systems can be easily connected and modified. The X-Series Active Tone Control (VLPF)

is compatible with older EMG Pickups and can be used in place of the passive tone control used with other EMG Active Pickups.

EMG accessories like the EXG, SPC or RPC Controls can be added to any EMG Pickup System without the need for an extra battery.

Included with each pickup:

1 VOLUME CONTROL (25K)

1 ACTIVE VLPF TONE CONTROL

.235

(6)

.390

.310

(8)

(10)

STEREO OUTPUT

JACK

BATTERY

BUSS

Warranty

All EMG Pickups and accessories are warranted for a period of two years. This warranty does not cover failure due to improper installation, abuse or damage. If

upon examination the pickup is determined to be defective, a replacement will be made. Warranty replacement products are covered by this same warranty. This

warranty covers only those pickups and accessories sold by authorized EMG Dealers. This warranty is not transferable.

MODEL:

60-7X

81-7X

Grey

Silver

C/S

1.95

1.47

2.00

8.50

-106