Dehumidification Function; Installing The Program; Firmware Upgrade And Verification - Philips 41BDL7331L User Manual

41BDL7331L
8.

Dehumidification function

Purpose of dehumidification in LED display
Internal parts and elements tend to corrode during storage when the LED display is left unused for a long period of time in a
humid environment. In particular when moisture gets into the diode, it may cause blurred screen or defective LED. As a result, the
dehumidification has an important role to play in the performance and lifespan of LED display.
Principles of dehumidification
Configuring LED display controller settings allows the display to change the brightness level from low to high during boot up
process. Likewise, the heat generated in the fade up process can take moisture out of the LED display. A stepwise fade up process
can avoid impulse current caused by damp diode when booting up the display.
8.1.

Installing the program

Dehumidification function is a custom-built procedure designed for use with specific LED display controller firmware.
1. Get the program "Nova LCT V5.4.2 Plus" from your local distributor and download it to your computer.
2. Install the program "Nova LCT V5.4.2 Plus".
3. Connect the USB cable to your PC and run "Nova LCT V5.4.2 Plus" that you installed.
8.2.

Firmware upgrade and verification

Select the User tab.
1. Select Advanced Synchronous System User Login(A). See Figure 1-1.
2. Enter the password and click Login. The default password is admin or 666. See Figure 1-2.
Figure 1-1
Figure 1-2
24