Philips L line 41BDL7224L Quick Start

LAN cable Power cable
(RJ45, CAT-5): 2 pcs (daisy chain): 2 pcs
* Di erences according to regions.
Display design and accessories may di er from those illustrated above.
Not included:
X2
3
Connecting the cabinets
a
Optional accessory
CTN: BM907006
*
*
b
Optional accessory
CTN: BM907005
*
1
Unpacking
Notes:
1. After unpacking, ensure that the modules are in good
condition. If anything is damaged or broken, please
contact your local service center immediately.
2. Use a pair of scissors to cut vacuum packaging, then
take the modules out of the package. Be extremely
careful not to damage the module when using the
scissors.
3. It is required to wear anti-static gloves before han-
dling the cabinet.
4. Do not place the display vertically on the oor, as it
may fall down and get damaged. (The damage will
not be covered by warranty)
Rear/top/side/bottom views
Quick start guide: 1 pcs
c
Optional accessory
CTN: BM907000
* Not included
1
2
1
Mounting holes for screw bolt
2
CHECK button
T style inner hexagon
wrench, size 7
d
2
Removing the
X2
opening
3
4
1
1
POWER IN connector
2
POWER OUT connector
3
DATA connector
4
DATA connector
*
X2
Before breaking the opening,
determine the number of
displays to install and the
installation layout to form a
large video wall array.
2
X2