Sharp AR-C360P Job Management Manual page 183

A
A-183 Printing books with the Imposition feature of DocBuilder Pro
a process inherently faster than printing a single page at a time.
DocBuilder Pro allows you to image multiple pages on a single
sheet, but output directly on your Fiery, rather than traditional
printing presses. In this manual, the paper on which a job is
imaged is referred to as the sheet.
The printed sheet is folded into something resembling a booklet
with connected pages. The folded sheet, called a signature, is
then trimmed to the finished size.
For pages to appear in normal reading order and position in the
final booklet, their ordering and positioning on the sheet must
differ from the normal book-reading order. You can demonstrate
this for yourself using an ordinary sheet of paper.
To model an eight-page booklet
1. Fold the paper in half horizontally.
Fold the top edge of the sheet down to meet the bottom edge.
2. Fold the paper again vertically.
Fold the left edge of the sheet over to the right edge. Now you
have a miniature version of a signature.
Sharp AR-C360P EFI Job Management Guide - 183