ACCESSORIES
Amplified pH/EC/TDS/Temperature probe
MA851D/1
with DIN connector and 1 m (3.3') cable.
MA9004
pH 4.01 buffer, 230 ml bottle
MA9006
pH 6.86 buffer, 230 ml bottle
MA9007
pH 7.01 buffer, 230 ml bottle
MA9009
pH 9.18 buffer, 230 ml bottle
MA9010
pH 10.01 buffer, 230 ml
MA9030
12.88 mS/cm solution, 230 ml
MA9015
Probe storage solution, 230 ml bottle
MA9016
General cleaning solution, 230 ml
M10000B
Rinse solution, 20 ml (25 pcs.)
SPECIFICATIONS
0.00 to 14.00 pH
0.00 to 20.00 mS/cm
Range
0.00 to 10.00 ppt
0.0 to 60.0ºC or 32.0 to 140.0°F
0.01 pH
0.1 mS/cm
Resolution
0.01 ppt
0.1°C or 0.1°F
±0.01pH
ACCURACY (@25°C)
±2% FS (EC/TDS)
±0.5°C or ±1°F
±0.02 pH
TYPICAL
±2% FS (EC/TDS)
EMC DEV.
±0.5°C or ±1°F
TEMPERATURE
Automatic from 0 to 60ºC;
COMPENSATION
ß adj. from 0.0 to 2.4%/°C
1 or 2-point
pH CALIBRATION
with automatic buffer recognition
EC CALIBRATION
Automatic, 1 point
EC/TDS FACTOR (CONV) Adj. from 0.45 to 1.00
MA851D/1 amplified pH/EC/TDS/
PROBE|
Temperature probe with DIN
(included)
connector and 1 m (3.3') cable.
0 to 50°C (32 to 122°F);
ENVIRONMENT
100% RH max.
BATTERY TYPE
1 x 9V alkaline (included)
BATTERY LIFE
approx. 300 hours
AUTO-OFF
after 8 minutes
DIMENSIONS
200 x 85 x 50 mm
WEIGHT
260 g (with battery)
CERTIFICATION
Milwaukee Instruments conform to the CE
European Directives.
Disposal of Electrical & Electronic
Equipment. Do not treat this product as
household waste. Hand it over to the
appropriate collection point for the recycling of electrical
and electronic equipment.
Disposal of waste batteries. This product
contains batteries. Do not dispose of them with
other household waste. Hand them over to the
appropriate collection point for recycling.
Please note: proper product and battery disposal
prevents potential negative consequences for human
health and the environment. For detailed information,
contact your local household waste disposal service or
go to www.milwaukeeinstruments.com (USA & CAN) or
www.milwaukeeinst.com.
RECOMMENDATION
Before using this product, make sure it is entirely suitable
for your specific application and for the environment in
which it is used. Any modification introduced by the user
to the supplied equipment may compromise the meter's
performance. For your and the meter's safety do not use or
store the meter in hazardous environment. To avoid damage
or burn, do not perform any measurement in microwave
ovens.
WARRANTY
This instrument is warranted against defects in materials
and manufacturing for a period of 2 years from the date of
purchase. Probe is warranted for 6 months. This warranty
is limited to repair or free of charge replacement if the
instrument cannot be repaired. Damage due to accidents,
misuse, tampering or lack of prescribed maintenance is
not covered by warranty. If service is required, contact your
local Milwaukee Instruments Technical Service. If the repair
is not covered by the warranty, you will be notified of the
charges incurred. When shipping any meter, make sure it is
properly packaged for complete protection.
Milwaukee Instruments reserves the right to make
improvements in design, construction and appearance of its
products without advance notice.
ISTMI806 07/20-1
USER MANUAL
pH/EC/TDS/Temperature
Portable Meter
milwaukeeinstruments.com (USA & CAN)
SATISFACTION
GUARANTEED
MI806
milwaukeeinst.com
Need help?
Do you have a question about the MI806 and is the answer not in the manual?
Questions and answers