Related Manuals for MS Electronics SST4-PB
Summary of Contents for MS Electronics SST4-PB
- Page 1 SST4-PB SST4-PB-T Product Guide Soft Start Timer with Integrated Pushbutton today, tomorrow and in the future mselectronics.co.uk...
- Page 2 1. In standby mode, the LED will glow dimly to enable the pushbutton to be located in the dark. 2. SST4-PB-T only: The LED will glow only when the pushbutton is enabled (when the outside temperature is below the temperature selected on the Temp Limit dial).
- Page 3 Additional operating guidelines: 1. If the unit is retriggered just after it has switched off, there may be a slight delay before the heater starts up. This is normal and helps to protect the unit from overheating. 2. If the LED flashes slowly while the heater is off, the unit has detected excessive use and has temporarily inhibited activation as a protective measure.
- Page 4 Product Warranty MS Electronics guarantees all their products against manufacturing defects for 3 years from the purchase date. If your product is found to be faulty, MS Electronics will, at their discretion, repair or replace the product free of charge.
Need help?
Do you have a question about the SST4-PB and is the answer not in the manual?
Questions and answers