Table of Contents
Advertisement
7.3. Switching the Machine Off
Pull the plug out of the outlet. Turn off the
water tap.
Switch your machine off with the On/Off
button after the programme has ended
and the End light turns on.
NOTE: Do not open the door before the
programme ends.
NOTE: At the end of washing program-
me, you can leave the door of your machine
ajar to hasten the drying.
NOTE: If the door of machine is ope-
ned or power is cut off during washing, the
programme will continue when the door is
closed or the power is restored.
Buzzer Sound Control
To change the buzzer sound level, follow
the below steps:
1. Open the door and press Option (6) and
Select (7) buttons simultaneously for 3
seconds.
2. When sound setting is recognized,
buzzer gives a long sound and machine will
display last set level, from "S0" to "S3".
3. To decrease sound level press Select
button (7). To increase sound level, press
Options button (6).
4. To save the selected sound level, turn off
the machine.
''S0'' level means all voices are off. Factory
setting is "S3".
Save Power Mode
To activate or deactivate save power mode,
follow the below steps:
1. Open the door and press Program (2)
and Option (6) buttons simultaneously for 3
seconds.
2. After 3 seconds, the machine will display
last Setting, "IL1" or "IL0".
3. When Save Power Mode is activated,
"IL1" will be displayed. On this mode,
interior lights (if avaliable) will turn off 2
minutes after the
door is opened, and the machine will turn
off after 15 minutes of no activity in order to
save energy.
4. When Save Power Mode is deactivated
"IL0" will be displayed. If Save Power Mode
is deactive, interior lights will be on as long
as the door is open, and the machine will
always be on unless it is turned off by user.
5. To save the selected setting, turn off the
machine.
In factory setting, Save Power Mode is
active.
EN - 20
Advertisement
Table of Contents
