Table of Contents
Advertisement
7. THE CONTROL PANEL
9
8
1
2
3
2.1
1.
2. Program Selection Button
2.1 Program Indicators
3. Delay Button
3.1 Delay Indicator
4. Remaining Time Indicator
5. Start/Pause Button
6. Options Button
7. Select Button
8. Rinse Aid Indicator
9. Salt Indicator
10. Tablet Option Indicator
11. Half Load Option Indicators
12. Hygiene Option Indicator
13. Extra Rinse Option Indicator
14. Extra Dry Option Indicator
15. Washing Step Indicators
a- Washing Step Indicator
b- Rinse Step Indicator
c- Drying Step Indicator
d- End Step Indicator
1. On/Off Button
Turn the machine on by pressing the On/Off
button.
2. Program Selection Button
Select a suitable programme by pressing
the Programme button. The selected prog-
ram indicator (2.1) will be on. For the details
of the programs refer to section Program
Table.
3. Delay Button
You can delay the start time of the program-
me for 1-2...24 hours by pressing the delay
button (3) before the programme starts. To
activate the delay time, press Start/Pause
button (5). The delay indicator (3.1) will be
on. If you want to change the delay time,first
press the Start/Pause button and then the
delay button to select a new delay time. To
activate the new delay time, press the Start/
Pause button. To cancel the delay, you need
to switch to 0 hour by using the delay when
the machine is paused. NOTE: If you switch
the machine to off position after selecting
the delay time and the programme has
started, the delayed time is cancelled.
15 4
5
10
11
3.1
12
13
14
7
4. Remaining Time Indicator
Programme flow can be monitored via the
Wash,Rinse, Dry, End lamps and
Remaining Time Indicator. While the Dry
lamp is on, the machine remains silent for
about 15-50 minutes with respect to the flow
of the programme you have selected.
6
5. Start/Pause Button
Press the Start/Pause button to start the
programme. The wash lamp turns on and
the Remaining Time Indicator shows the
programme duration. It also indicates the
remaining time during the programme flow.
If you open the door of your machine when
the programme is running the duration of
the programme pauses, and related was-
hing step indicator blinks.
6. Options Button
Options can be selected by pressing the
Options button repeatedly. The chosen
option will be indicated by a blinking LED.
Options button that have selectable
functions shown from 10 to 15 related to the
model.
7. Select Button
Select the option by pressing the Select
button. The LED for the chosen option will
then remain lit.
8. Rinse Aid Indicator
When the rinse aid level is low, the rinse aid
lack warning indicator turns on and you
should fill the rinse aid chamber.
9. Salt Indicator
When there is insufficient softening salt, the
salt lack warning indicator turns on and you
should fill up the salt chamber.
10. Tablet Option Indicator
Select the Tablet option when using
combi-ned detergent that contains salt,
rinse aid and extra functions.
11. Half Load Option Indicator
By selecting the half load option ,three sorts
of washing can be executed: both baskets,
upper basket and lower basket. These
options are ideal for smaller loads, allowing
the dishwasher to perform smaller washes
with reduced consumption.
12. Extra Hygiene Option Indicator
You may select Extra Hygiene option in
order to obtain a more hygienic and a
cleaner washing process by altering the
EN - 18
Advertisement
Table of Contents
