Starting The Programme; Child Lock; Changing The Programme After It Is Started - Beko DHR 73431 B User Manual

Operating the product
Canceling the end duration function
If you want to cancel the end duration
setting countdown and start the programme
right away:
1. Cancel the programme by pressing
the On/Off button. Turn on the drying
machine again by pressing the On/Off
button. When your drying machine turns
on for the first time, it turns on with the
declaration (cotton wardrobe dryness)
programme.
2. Select the programme you desire using
the Programme Selection knob.
3. Start the programme by pressing the
Start / Pause button.

6.11 Starting the programme

Start the programme by pressing the Start /
Pause button.
Start/Pause led and the Drying led light up,
indicating the programme started. The ":"
sign in the middle of the remaining duration
starts to blink.

6.12 Child Lock

The machine features a child lock which
prevents the machine programme flow from
being affected when buttons are pressed
during operation.
When the Child Lock is active, all buttons
except for the On/Off button are deactivated.
To activate the child lock, press the Sound
Notification button and End Duration button
simultaneously for 3 seconds.
Te child lock should be deactivated to be able
to start a new programme after the current
programme ends or to be able to interfere
with the current programme. Keep the same
buttons pressed for 3 seconds again to
deactivate the child lock.
C
The lock led on the screen
lights up when the Child Lock is
activated.
C
Child Lock deactivates when the
machine is turned off and on
again using the On/Off button.
A warning sound is heard when any button
is pressed (except for On/Off button) or the
Programme Selection knob is turned while
the child lock is active.
Dryer / User Manual
6.13 Changing the programme
after it is started
After the machine starts running, you can
change the programme you selected to dry
your laundry with a different programme.
1. For example, to select Extra Dry
programme instead of the Iron Dryness,
stop the programme by pressing the
Start / Pause button.
2. Turn the Programme Selection knob to
select the Extra Dry programme.
3. Start the programme by pressing the
Start / Pause button.
Adding and removing laundry in
stand-by mode
If you want to add or remove laundry after
the drying programme starts:
1. Press the Start/Pause button to take
the machine into Stand-by mode. Drying
operation stops.
2. Open the loading door, add or remove
laundry and close the loading door.
3. Start the programme by pressing the
Start / Pause button.
C
The laundry adding made after
the drying operation started may
cause the dried laundry inside
the machine to mix with the wet
laundry and the laundry to remain
damp after the operation ends..
C
Laundry adding and removing can
be repeated as much as desired
during drying operation.
But this process would
continuously interrupt the
drying operation, and so would
cause the programme duration
to lengthen and increase
energy consumption. Thus, it is
recommended to add laundry
before the programme starts.
C
If a new programme is selected
by changing the position of the
programme selection knob while
your machine is in stand-by
mode, the running programme
ends.
25 / EN