Advertisement
QIG-TMX-55UN
X551UN-TMX4D
IR In
IR Out
4.
Apply the OverFrame bezel kit to the video wall. Please follow instructions provided with kit
(KT-55UN-OF).
5.
Screw the IR Receiver (KT-RC) directly to the outside of the video wall and plug it directly
into the IR In terminal of Display 1.
6.
Set each monitor ID up individually through the 'MULTI-DSP' menu within the OSD. It's
recommended that the ID's go from left to right, with the ID No. 1 being in the top left corner.
RS232 Out
RS232 In
NEC Display Solutions of America, Inc.
Overframe Kit
Rev 1.0
3
Advertisement
