Table of Contents
Advertisement
Quick Links
Download this manual
See also:
User Manual
QIG-TMX-55UN
X551UN-TMX4D
Parts List
o (4) X551UN Displays
o (4) Overnight Onsite Service Warranties (OnSiteOn-55)
o (1) Peerless 2 x 2 Wall Mount (MIS741-A2)
o (4) 2m DVI-D to DVI-D M/M cables
o (1) 5m DVI-D to DVI-D M/M cable
o (3) 2m Null Modem to Null Modem F/F cables
o (1) IR/Remote Control Kit (KT-RC)
o (2) Overframe Bezel Kits (KT-55UN-OF)
o (1) Tripp Lite 6 Outlet Strip (ISOBar6)
NOTES:
Any walls that this video wall solution is anchored to must be strong enough to support the displays and the
o
installation must be in accordance with any local building codes. All mounting apparatuses must make secure
contact to wooden studs.
Please read entire document before starting installation
o
NEC Display Solutions of America, Inc.
Rev 1.0
Advertisement
Table of Contents
Related Manuals for NEC X551UN-TMX4D
Summary of Contents for NEC X551UN-TMX4D
- Page 1 Any walls that this video wall solution is anchored to must be strong enough to support the displays and the installation must be in accordance with any local building codes. All mounting apparatuses must make secure contact to wooden studs. Please read entire document before starting installation NEC Display Solutions of America, Inc. Rev 1.0...
- Page 2 For mounting information, please refer to the Installation Instructions provided by Peerless Manufacturing inside of the box of the MIS741-A2. Connect the NEC displays using the included DVI cables and the integrated DVI loopthrough connections on the bottom of each monitor. Note that the DVI connection closest to the front of the display is the ‘in’...
- Page 3 Set each monitor ID up individually through the ‘MULTI-DSP’ menu within the OSD. It’s recommended that the ID’s go from left to right, with the ID No. 1 being in the top left corner. NEC Display Solutions of America, Inc. RS232 Out...
- Page 4 OSD menu should appear on the screen of the desired ID. Use the TileMatrix feature to setup the 2x2 Video Wall. The Tilematrix feature of the NEC Display allows for one image to be expanded and displayed over a 2x2 Video Wall Setup.* This is accessed through the OSD (On-Screen Display) Controls under the “MULTI-DSP”...
- Page 5 Click ‘YES’ on enable to display video wall. Note that this step will need to be completed for each screen. If you are experiencing issues with this setup, please call our Technical Support number at (800) 632-4622 NEC Display Solutions of America, Inc. Rev 1.0...
Need help?
Do you have a question about the X551UN-TMX4D and is the answer not in the manual?
Questions and answers