Replacing The Touch Module - Lenovo IdeaCentre B310 Hardware Maintenance Manual

Chapter 8. Replacing hardware
6. Disconnect the cable from the camera.
4. Connect the cable to the new camera.
5. Align then screw in the new camera.
6. Align then screw back the shell.
7. Install the computer cover and screw back the computer stand.

Replacing the touch module

To replace the touch module:
1. Remove the computer stand. Refer to "Removing the computer stand".
2. Remove the computer cover. Refer to "Removing the computer cover".
3. Remove the screw that secures the touch module to the chassis.
5. Lift up the memory module.
53