You Cannot Perform The Ir Hotsync ® Operation - Sony CLIE PEG-SJ22 Troubleshooting Manual

You cannot perform the IR HotSync
B The IR HotSync
an IR port.
B Verify that the HotSync
the desktop screen of your computer and that HotSync Manager is
operating. HotSync Manager is operating properly if the menu is
displayed after clicking the HotSync
B If you use Windows 2000 Professional/Windows XP, click the HotSync
icon in the Windows task tray on the desktop screen of your computer
and make sure Beaming is selected.
B If you use Windows 98 Second Edition/Windows Me, click the HotSync
icon in the Windows task tray on the desktop screen of your computer
and make sure Local Serial is selected.
B If you use Windows 98 Second Edition/Windows Me, click the HotSync
icon in the Windows task tray on the desktop screen of your computer,
then select Setup and the Local tab. Make sure that the simulated port for
infrared communication is set in Serial Port.
B Verify that Local is selected in the HotSync screen on your CLIÉ
handheld and IR to a PC/Handheld is selected.
B Point the IR port of your CLIÉ handheld directly at the IR port of your
computer between 4 to 8 inches (approximately 10 to 20 centimeters)
apart. Best results of beaming distance may vary depending on
compatibility between the devices.
B You cannot perform the IR HotSync
your CLIÉ handheld is insufficient. After charging the battery of your
CLIÉ handheld, try the IR HotSync
B Reduce the speed setting.
If you have the call waiting service on your telephone line, tap IR to a PC/
Handheld in the Connection Preferences screen from Preferences.
Then tap Edit, Details and select Speed in the Details screen.
B Verify that the IR port of your computer is enabled.
22
®
operation cannot be performed for a computer without
icon is displayed in the Windows task tray on
®
operation
icon.
®
operation if the battery power of
®
operation again.